气动系统的动力源是空气压缩机。
电控系统:电气控制柜,分站及气动系统。
Electrical control system: electrical control cabinet, sub control station and pneumatic system.
这种方法对气动系统的优化设计具有普遍意义。
And the designing method has universal significance for optimal design of pneumatic system.
论文还引入了气动系统,设计制造了气动夹具。
Pneumaticsystem is introduced in the paper and pneumatic clamp is designed and made.
管接头是液压和气动系统中不可缺少的辅助元件。
Tube fittings are necessary auxiliary elements in hydraulic and pneumatic systems.
结合实践,探讨了汽车焊装线气动系统的基本设计技术。
And basic design technique of pneumatic system of Automotive welding line is discussed combined with the practice.
本文较系统地介绍了测试台气动系统和CAT系统的设计。
The design of pneumatic system and CAT system for integrative test stand are systematically presented in the paper.
气动系统电磁换向阀采用汇流板集装方式,减少了占用空间;
Electromagnetic valve of pneumatic system adopts conflux boards so as to reduce space.
结构上主要包括四工位分度盘、气动系统、加工流程的设计。
The structure control systems includes the dividing plate which have four work station, pneumatic system, machining working process.
压力和胶水的质量可以根据胶水类型和工件材料调节气动系统。
The pressure and the quality of glue can be regulated by pneumatic system according to the type of glue and the material of work piece.
对该设备的工作原理和气动系统作了详细的介绍并给出了气路图。
The working principle and the pneumatic system of this equipment were introduced. The pneumatic chart was also presented.
一般来讲,气动系统运动机件较少,因而可靠性高,维护成本低。
In general, pneumatic systems have relatively few moving parts, contributing to high reliability and low maintenance costs.
文章的研究为气动系统结露现象的内部结露研究提供了理论依据。
The content of the paper can give some refernce for the research of the internal condensation of vapor in pneumatic system.
安装或修改飞机发动机,机械,液压,飞行控制,燃油和气动系统。
Install or modify aircraft engines and mechanical, hydraulic, flight control, fuel and pneumatic systems.
特别适合于双压气动系统,是高低压管网优化必选的精细节能产品。
It is particularly suitable for dual-pressure pneumatic system, which is precise energy-saving product required in high and low pressure pipe network optimization.
介绍对气动系统的单片机PCM(脉码调制)控制进行的实验研究。
This thesis introduces the tests of computer PCM control in pneumatic system, and conclades that PCM control is an effective controlling method.
作者曾提出一种直接能量转换的多缸节能气动系统,它可节能近50%。
The authors put forward a Multicylinder Energy-Saving Pneumatic System of Direct energy Transfer (DETS) which may save about 50% of energy.
首先说明课题的意义和解决方案,然后介绍气动系统、PLC利机器人。
First, it explains the significance and the solution of the task, and then it briefly introduces the pneumatic control system, PLC and robot, etc.
在此基础上,设计了铜铝管对焊机的执行机构,包括其气动系统和配套夹具。
The executive mechanism of Cu-Al pipe butt welder, based on above, was designed, including its air system and mating clamper.
介绍了采用气动元件的物料搬运系统的结构、气动系统及其PLC控制系统。
The machinery structure, pneumatic system, PLC controller system of pneumatic materiel conveying system were introduced.
MPACT是一种气动系统,能产生高压,它能压缩空气,用于从各种军用飞机上投放武器。
MPACT is a pneumatic system that generates the high-pressure, compressed air required to jettison weapons from various military aircraft.
安装,故障排除和维护动力传动,真空,液压和气动系统以及可编程逻辑控制器。
Install, troubleshoot and maintain power transmission, vacuum, hydraulic and pneumatic systems, and programmable logic controls.
前言:本文叙述了贵溪冶炼厂新阳极炉驱动装置气动系统存在的缺陷及改进措施。
This essay describes the defects of pneumatic system of new anode furnace driving unit used in Guixi Smelter and how to solve these defects.
文章叙述了气动系统的组成和工作原理,介绍了膨胀式制动器的构造和设计计算方法。
This paper describes the construction and working principal of thecontrol system, introduces the construction of the pneumatic expansion brake and it…
但气动系统由于其固有的强非线性和低刚度的弱品质,使得其控制性能和效果不太理想。
But the control performance of the pneumatic system is not very good because of its inherent non-linearity and low-stiffness.
RACO执行器提供可靠性,环境安全保护和经济的解决方案,取代了液压和气动系统。
RACO actuators offer reliable and environmentally safe and economical solutions replacing hydraulic or pneumatic systems.
设计了精校机自动送料机构气动系统原理图,并进行了系统的设计计算和气动元件的选择。
Design the principle of the pneumatic system of automatic work-piece carrying mechanism of the precise straightening press.
根据全自动纸浆模塑生产线的工艺要求,采用信号—动作状态图法对气动系统进行分析与设计。
According to the technique request of pulp-mold produce line, the pneumatic system has been analyzed by the way of signal-action state graph.
根据全自动纸浆模塑生产线的工艺要求,采用信号—动作状态图法对气动系统进行分析与设计。
According to the technique request of pulp-mold produce line, the pneumatic system has been analyzed by the way of signal-action state graph.
应用推荐