必须大力推广气动测量法。
本文提出一种以气动测量原理实现的外圆磨削在线无损测控方法。
In this paper, the author proposes a non contact on line measuring and controlling method for external grinding according to the principle of pneutronic measuring.
本文在对气动测量进行理论分析的基础上,研制出一种新型气动量仪。
On the basis of theoretical analysis on the pneumatic measurement, a new type of pneumatic measuring instrument was developed.
在对气动测量进行理论分析的基础上,研制出一种差动式新型气动量仪。
On the basis of theoretical analysis on pneumatic measuring instruments, a new type of pneumatic instrument is introduced.
气电转换式电子柱量仪是将气动测量原理与电子放大显示技术融为一体的新型量仪。
An electro - pneumatic electron column measuring instrument is a new type of measuring instrument combining pneumatic principle with electron magnification technique.
文中详细分析了气动测量原理,比较了各种气动测量气路的优劣,确定了差压式测量气路。
Based on a comparison of various current flatness measurement methods, this paper proposes to utilize pneumatic measurement in the flatness measurement system for the brakes 'steel back.
并配有万能工具显微镜与三管气动测量仪、瑞士进口红宝石比较仪、洛式硬度计等先进检测设备。
And with a microscope and Universal three pneumatic measuring instrument, Switzerland imports Ruby comparator, Luo-hardness, and other advanced detection equipment.
该试验台主要由气源增压系统、工件气动定位系统、测量系统和电气控制系统等组成。
The test consists of increasing air pressure system, workpiece pneumatic locating system, measuring system, electrical controlling system and so on.
战神一号X型将上升到约40公里(约25英里)的高空,在其动力飞行阶段,将不间断地对其运载空气动力学指标、火箭的第一阶段的控制和表现进行测量。
The 1-x will climb about 40km (25 miles) into the sky during the powered phase of its flight, continuously measuring vehicle aerodynamics, controls and performance of the rocket's first stage.
当使用启动传送系统时,测量信号就由变送器将比例为0% ~ 100%的测量值转换成气动信号。
When a pneumatic transmission system is employed, the measurement signal is converted into pneumatic signal by the transmitter scaled from 0 to 100 percent of the measured value.
数以百计的压力传感器嵌入到这些模型里,测量起飞和降落期间的空气动力性能。
Hundreds of pressure sensors are embedded in the models to measure aerodynamic performance during takeoff and landing.
非接触式气动传感器测量技术是机械零件尺寸测量和控制的一种重要方法。
The measurement technique of non-contact pneumatic sensor is an important method in the dimension measurements of machine parts.
在不同位置采用五孔探针测量了两种叶栅的气动参数并在叶片表面做了墨迹流动显示。
Aerodynamic parameters of the two cascades are measured by a five-hole probe at different positions and ink trace flow visualization is conducted on blade surfaces.
主要讨论了测量参数间的时间延迟对飞机气动导数辨识结果的影响。
This paper briefly discusses the effects on the aerodynamic derivative identification results caused by time delay in measured parameters.
风洞模型自由飞是一种无支杆干扰的非接触式气动特性测量方法。
The model free flight method in wind tunnel is a non-intrusive way to measure the aerodynamic characteristics of a model.
等温容器是一种新型气动元件流量特性测量装置。
Isothermal chamber is a new kind of measuring installment used to test pneumatic component flow rate characteristics.
为了提高气动参数辨识的精度,根据飞机运动方程,给出了测量中的系统偏差、尺度因子误差和随机噪声描述,并提出了一种飞行数据相容性检验的快速算法。
To get high accuracy of the identification of aerodynamic parameters, based on the motion equation of an aircraft, a fast algorithm for flight data compatibility check is presented in this paper.
动态波前相位信息测量是大气光学、气动光学和激光技术等领域的重要实验手段。
The data measurement of dynamic wavefront phase is an important experimental means for atmospheric optics, aero optics and laser technique.
由于没有支架干扰,测量的气动参数具有更高的可信度,模型的姿态调整也更方便。
Because it eliminates the mechanical supporting interference, the parameters of aerodynamics measured by MSBS have high reliability. It is also easy to adjust the model posture.
该装置把反射式气动传感器固定在数控工作台的滑座上,组成了一个测控一体化的测量装置。
In the device, a reflective pneumatic sensor is fixed on the slide of numerical gallery to compose a measuring and controlling integrated measurement device.
研究中测量了模型的气动力及力矩特性,同时测量了风洞的非定常壁压。
The unsteady aerodynamic and moment characteristics of the models and the unsteady wall pressure are measured.
针对被测球面轮廓的尺寸小、精度高的特点,采用“气动法”测量球度误差。
Aimed at the spheric face of smaller diameter and sphericity of a higher-precision, a new method called "pneumatic measurement" is used in the area of sphericity error measurement.
介绍了电站锅炉空气动力场的冷态模化的基本相似模化原理、试验控制参数的计算方法及相关的测量技术。
Present the basic similarity simulation principle followed in cold simulation of power plant boiler dynamic field, way of calculating test control parameters and associated measuring techniques.
通过壁面静压测量、流场显示及气动探针测量研究了不同掠型叶片组成的平面扩压叶栅特性。
The performance of rectangular compressor cascades composed of different swept blades was studied by static pressure measurement, flow visualization and probe measurement.
通过分析气动测头的测量原理,设计了高精度锥度气动测头及其校对规。
Based on the analysis of measuring principle of pneumatic gauge head, a high-precision pneumatic gauge head for taper measurement and its reference device are designed.
也适用于建筑、化工、纺织、粮食储藏、空气动力学研究等其它场合的风速测量。
Also suitable for construction, chemical, textile, food storage, air dynamics research and other occasions of wind speed measurement.
由于反射式气动传感器测量原理不同于传统的背压式气动传感器,从而能够使其量程大幅度提高。
Owing to measuring principle is different from traditional pneumatic sensor, reflect pneumatic sensor can greatly improve measurement range.
测量了炉内空气动力场及炉膛出口水平烟道速度分布。
The in-boiler aerodynamic field and horizontal flue duct gas speed distribution at the furnace outlet was measured.
适当延长地板,可提高气动阻力系数的测量精度。
By extending length of the test floor properly, the aerodynamic drag coefficient can be measured more precisely.
适当延长地板,可提高气动阻力系数的测量精度。
By extending length of the test floor properly, the aerodynamic drag coefficient can be measured more precisely.
应用推荐