然后根据光纤组A和B的标定曲线,对振动计的灵敏度进行了补偿。
Then based on the calibration curve of group A and B, compensation of sensitivity was made.
校正曲线数:仪器可存储9条标定曲线,5条为一元一次直线,4条为二项式抛物线。
The number of calibration curve: apparatus can store 9 calibration curve, 5 for one line, 4 for binomial parabola.
在碳电阻温度计标定过程中,经验公式的选用对碳电阻温度计标定曲线的正确性有着重大的影响。
In the course of calibration of carbon thermometer, the selection of the experimental formula of carbon thermometer will affect the validity of the calibrating curve greatly.
作为视频序列的高动态图像获取的直接应用,本文用视频序列标定的响应曲线来校正全景图的颜色差异。
As the direct application for recovering response function from a video sequence, we use the response curve calibrated above to solve the problem of pixel value differences in panorama.
仪器数据存储量大,含量分析结果和标定工作曲线参数随时可查。
Of instrument data storage, content analysis and calibration curve parameters readily available.
本文设计交通标识牌自动识别系统由以下几个模块组成:图像分割、摄像机标定、特征曲线的提取、三维复原和图像匹配。
The traffic sign automatic recognition system is composed of the following modules: image segment, camera calibration, characteristic curve extraction, three-dimension recovery and image matching.
这种方法的误差取决于幅频特性曲线的标定精度。
The error depends on the calibration accuracy of the amplitude response.
在大量观察岩心资料并对裂缝特征进行详细描述的基础上,对测井曲线进行岩心标定。
Through investigating a large amount of core data, the characteristics of fractures were described and recorded as log curves in detail.
该模型通过一系列控制参数来包络钢支撑复杂的滞回曲线,并根据已有的同类型支撑试验结果标定控制参数。
This model contains a series of governing variables to envelop the complicated hysteretic curve of steel braces and the governing variables can be calibrated by available test results.
重点论述了熔滴过渡优化控制,对各种不同焊丝的一脉一滴临界电流曲线进行了标定。
The optimal control of the droplet transfer is emphasized in this part, especially the calibration of the curve of the One-Pulse-One-Droplet critical current of various welding wires.
驱替特征曲线法是研究油田含水规律、预测开采指标和标定可采储量最常用的方法,目前已形成50多种。
Water displacement curve is the most common method for water cut rule study, productive index prediction and recoverable reserve calibration. There are more than 50 methods of such a kind nowadays.
该仪器具有显示温度波形曲线、热电偶标定、确定切削温度指数公式、判定切削状态的能力。
It is capable of displaying temperature flexuous curve, calibrating thermocouple, establishing the cutting temperature exponential formulation and predicating the state of cutting.
并且实现了系统标定及对测量数据的实时显示、动态绘制曲线、存储和打印等功能。
The system have functions of data calibrate, real time data display, the system demarcate, the real-time dynamic drawing data curve, data storage and print etc.
本文简述了标定的原理、田间土壤水分特征曲线和非饱和导水率的标定方法,还给出了水分运动参数标定的实例。
In this paper, the concept and the method of scaling are described, and some examples of scaling of soil water characteristic curve and unsaturated hydraulic conductivity are given.
文中给出了调试后的系统参数配置,绘制的动态曲线以及金属位置的坐标定位图。
The thesis presents the system parameter configuration, the dynamic curve and the coordinate orientation of metal position.
在每次测量前需要手动标定X - Y记录仪的坐标以及切换测试项目间的油路,测试曲线绘制完成后也需要手动计算电液伺服阀的各项性能参数。
Before the test, the coordinates of the X-Y recorder are demarcated and the shifts of the test oil circuit are done manually. The parameters of the characteristics are also computed manually.
对冲击式曲线穿孔机的空间坐标定位方法进行了有效的分析,并对一个重要的定位元件———旋转角度传感器进行了研究。
In this paper, the locating method of pneumatic boring machine is analyzed and an important sensor is designed, which can measure the roll Angle of pneumatic boring machine.
在长期的观测过程中,仪器机械部分和电路部分均会产生漂移,因此,仪器记录曲线的格值必须定期进行标定。
As a consequence of the drift of inclinometer's mechanicalness and electrical circuit during the long-dated observation, the lattice value of the inclinometer's record trunk must be calibrated termly.
报道了软x光能谱仪探测元件的能量响应曲线标定工作。
The calibration of the energy response of the detection elements for soft X ray spectrometer is reported.
使用二个双曲线(三个接收机)系统能获得2d目标位置,当使用最少三个双曲面(四个接收机)系统能实现完整的3d立体目标定位。
Using two hyperbolas (three receivers) the system can obtain 2d target position, while using at minimum three hyperboloids (four receivers) the system can achieve full 3d target locating.
本文介绍了一个标定摄像机响应曲线的算法,通过自动曝光的视点固定拍摄的视频序列标定摄像机响应曲线。
In this paper, we introduce another algorithm to do it, which USES an automatically exposed video sequence gathered at a fixed observing point.
研究探讨了一种基于平面二次曲线的纯旋转摄像机自标定方法。
In this paper, instead of corresponding image points which are widely used in the literature, corresponding image conics are used to calibrate a rotating camera.
在转移率标定中提出了正向和逆向的二次转移曲线;
在用自然电位或微电极测井曲线标定泥岩段的基础上,利用声波测井数据预测地层孔隙压力,并以樊11-1井为例进行计算。
The method of predicting formation pressure using sonic logging data is presented. The self-potential and micro electric logs are used to calibrate the shale interval in F11 Well of Dongying sag.
主要包括图像采集、摄像机标定、二维目标定位、三维空间定位和三维曲线拟合。
This scheme includes five steps:image acquisition, camera calibration, 2D orientation, 3D orientation and spatial curve simulation.
本文采用两种方法来解决高温温区的外推标定问题,即基于二次曲线的导数最小二乘法和基于修正指数模型的趋势外推法。
One is differential least square method based on conic, and the other method is trend extrapolation based on modified exponential model.
经过工业现场的应用表明,这种方法可以在减少标定点的基础上,确保曲线的拟合精度,保证测量精度。
The result of the industrial application shows that the method may ensure fitting precision and measure accuracy based on…
经过工业现场的应用表明,这种方法可以在减少标定点的基础上,确保曲线的拟合精度,保证测量精度。
The result of the industrial application shows that the method may ensure fitting precision and measure accuracy based on…
应用推荐