波纹板式换热器通常用于低温设备上。
Usually, the corrugated plate heat exchanger is used on the low temperature equipment.
板式换热器的密封垫片滑离了垫片槽。
Plate heat exchanger of sealing gasket slip off the gasket groove.
新板型板式换热器的研究。
Design and heat transfer characteristic of new plate heat exchanger.
介绍了多种类型的焊接板式换热器及其应用情况。
The manifold types of welded plate type heat exchanger and its application are recommended.
根据客户需要，并能及时为客户维修各类板式换热器。
According to customer needs and timely maintenance for all types of customers plate heat exchanger.
本文所叙正是此项技术在固定管板式换热器中的实际应用。
In this paper, it talks about the technology application in immobility pipe-board type heating exchanger.
冷凝器、蒸发器等换热部件采用了换热效率较高的板式换热器。
We applied Panel heat Exchanger with higher heat exchange efficiency and smaller size in condenser and evaporator and other heat exchange parts.
介绍了一种能利用低压二次蒸汽的新型板式换热器在味精厂的应用。
A new type of plate heat exchanger using low-pressure secondary steam was introduced in this article.
板式换热器在重水系统中的应用对研究堆的设计具有一定的参考价值。
The application of plate heat exchanger in heavy water system gives good experience for future research reactor design.
普通板式换热器在高温、高压和腐蚀介质等情况下的使用受到了限制。
The use of general plate heat exchanger is limited due to high temperature, pressure environment and erodent medium.
板式换热器在制冷系统中得到了广泛的应用，它具有高效、紧凑等优点。
Plate heat exchanger is applied in refrigerating system widely with the features of high efficiency and compact.
应用数值计算软件对人字形波纹板式换热器内板片间的流场进行了模拟。
Flow fields were simulated by mathematical software between two corrugated plates in a chevron-type plate heat exchanger.
分析了全焊接板式换热器发生应力腐蚀的原因，提出了相关的防护措施。
The stress corrosion which will be possible happen in welded plate heat exchanger was principally analyzed and preventive measures for them were given.
根据生产硝酸钾工艺要求与物料特性，设计了用于冷却换热的板式换热器。
Based on the technology requirements of potassium nitrate production and the properties of materials, a plate heat exchanger was designed for cooling and heat exchange.
探讨了采用板式换热器作为热力站换热设备的变流量供热系统的调节方式。
The regulation mode of variable flow heat-supply system where the plate heat exchanger is used as heat exchange device in substation is discussed.
通过分析板式换热器的特点，得出板式换热器优于螺旋板式换热器的结论。
Finally, it showed that the plate heat - exchanger was better than the screw plate heat - exchanger, by analyzing both characteristics.
板式空冷器是一种将板式换热器与空冷式换热器的优点结合的新型空冷器。
Plate air-cooled cooler is a new kind of coolers that combines the merits of both plate heat exchanger and air-cooled heat exchanger.
本文根据两相流动换热理论，提出了一个板式换热器的稳态分布参数模型。
According to two-phase flow theory, a steady distributed parameter model of plate evaporator to simulate the plate evaporator is developed.
对全焊接板式换热器发生的应力腐蚀进行了分析并且给出了相关的防护措施。
The stress corrosions in welded plate heat exchangers are studied and associated preventive measures are suggested.
本文结合工程实例对板式换热器应用在三甘醇脱水装置中的节能效果进行了介绍。
The energy saving of the application of the plate heat exchanger with some practical cases was introduced.
提出了螺旋板式换热器用于气-液热交换时的流动阻力以及传热设计的计算方法。
A calculation method is presented for heat transfer and flow resistance of a spiral plate heat exchanger for the gas-liquid.
采用数值模拟方法，研究了纵流式换热器和折流板式换热器流场和温度场的分布。
The distribution of the temperature field and flow field in longitudinal-flow heat exchanger is explored by numerical method.
介绍了板式换热器的主要特点、选型条件、基本原理及其在生产中的成功应用情况。
The paper introduces the main characteristics, choice conditions, basic principle and its successful application of plate heat exchanger.
螺旋板式换热器是一种高效换热器设备，适用汽—汽、汽—液、液—液，对液传热。
Spiral-plate heat exchanger is a kind of high efficient heat exchanger device which is applicable to vapor-vapor, vapor - liquid, liquid – liquid heat transfer to liquid.
随着它的NT系列GEA板式换热器系统已成功实施其在市场上的创新性研究的结果。
With its nt Series GEA PHE Systems has successfully implemented the results of its innovative research onto the market.
预热法包括用热管换热器、管式换热器、板式换热器、热媒式换热器和蓄热式热风炉。
The preheating method includes heat-pipe exchanger, tubular heat exchanger, plate heat exchanger, heat medium exchanger and regenerative hot stove.
对板式换热器、波纹管换热器和超导热管换热器的特点及使用场合进行了分析、对比。
A comparison and an analysis are made of the characteristics and situations of use of plate, corrugated tube and super conductive heat pipe exchangers.
介绍螺旋板式换热器的传热机理、结构和制造工艺，列举了该换热器在合成塔中的应用。
Heat transfer mechanism, structure and its fabrication of spiral plate heat exchanger are introduced. Its application in converter is described.
在石油炼制、化学、石油化工和钢铁等行业，焊接板式换热器正得到越来越广泛的应用。
In the industries of oil refining, chemical, petrochemical and iron and steel etc,. The welded plate type heat exchangers are applied more extensive and more extensive.
在综合考虑技术、经济、环境效益及节能的基础上，论述了对板式换热器优化设计的方法。
For obtaining an optimized design of PHE, a computer aided design tool was developed and the existing technology, economics and environment impact and energy efficiency are taken into account.
应用推荐