对转子弓的材质、板厚和结构做了改进。
Materials, board thickness and structures of turning bows are improved.
电流调节范围宽，可适合多种板厚的焊接。
With wide range to adjust current, it can weld plates with various thickness.
在设置导缆孔处舷墙板增加板厚和加强筋。
Bulwark plate to be thickened and stiffener to be added in way of mooring hole.
P C板挑选适宜的板厚，并容许曲率半径。
Choose the suitable thickness PC board, and allow the radius of curvature.
用于低碳钢板气割时，气割成本随板厚不同而变化。
When propane gas cutting low carbon steel plate, the cost varies with the thickness of the steel plate.
试验结果，大幅度降低了断缝率，提高了生产率及板厚精度。
Tests show that the seam breakage rate of the strip has been widely reduced and productivity and thickness accuracy raised by this method.
最后，用两个实例验证了板厚公式的合理性与工程应用的可行性。
Finally the rationality of the formula and the feasibility of engineering use are verified by two examples.
并藉著板厚的改变探讨其对热影响区之金相组织与硬度造成之影响。
Next, consider the effect of the thickness of plates on the microstructure and hardness in HAZ.
在多种板厚条件下获得了良好的激光填丝和激光电弧复合焊接接头。
Satisfied laser wire welded joints and laser-arc hybrid welded joints were obtained at several plate thicknesses.
脉冲功能最适合焊接不同板厚单面焊双面成型、各种方位的焊接等。
The pulse function is most suitable for welding plates with different thickness, one formation welding and welding at various position.
模拟结果表明，前后张力不仅具有矫正板形功能，还具有微调板厚作用。
The results show that back and front tension net only possesses the function of controlling sheet shape but also can adjust sheet thickness in the process.
通过调整楼板型式和板厚，探讨了楼板刚度对混合结构受力性能的影响。
By changing the type and thickness of floor, the effect of floor rigidity on behaviors of hybrid structure was discussed.
板厚或肋骨惯性矩的变化会引起结构传声损失曲线上隔声低谷位置的变化；
The position of minimum values on the sound transmission loss curve varies with the changes made on plate thickness and the moment of inertia of stiffeners.
如何提高在复杂工况下的冷带板厚控制精度是当今该领域的前沿热点问题。
Studying how to improve the thickness control precision of cold plate is a hotspot-forefront topic in the rolling field.
实验数据对比分析表明，该方法是有效的，能够实现板形板厚的综合控制。
Experimental results show that the strategy is valid, which provides another way for the integrated control of gauge and shape and can be used to guide production in practice.
则对管件的展开尺寸和形状会产生一定的影响，此时须采取相应的板厚处理。
There are some important factors closely related to the thickness processing including thickness, shape, connective form and welding slope.
从平整度控制、板厚及标高施工控制三个方面对滑模摊铺施工方法进行论述。
Discussion is made on this methods from flatness, thickness of slab and elevation control.
高精度板厚测量仪是实现高精度铝薄板加工及板凸度的精确控制的关键设备。
The high-accuracy laser measurement instrument for the thickness of plate is a key to realize the high-accuracy process in aluminum thin plate and the flat control.
板形测控数学模型、解析板形刚度理论和板形板厚协调规律的综合称为板形计法。
Shape survey and control mathematics model, analytical theory for shape stiffness and the shape and gauge coordination control law are called shape meter method.
应用最近建立的解析板形方程推出板形最佳轧制规程和板形板厚协调控制新方法。
The shape optimal rolling schedule and new method of shape and gauge coordination control which inferred from the new built analytic shape equation have been achieved.
那么提高板形板厚综合系统的控制水平，就成了一个重要的研究难点和研究热点。
Therefore how to increase the control level of the flatness and gauge complex system has become hotspot and hard pot of related study.
以及温度变化与板坯含水率、板厚、板材密度和热压温度等因素的关系进行了探讨。
Experiment results showed the temperature change was affected by some factors respectively, such as moisture content of the map, thickness and density of panel pressed, and hot-pressing temperature.
本文阐述了焊接坡口和板厚处理对钣金加工制造工艺的影响，并用合理的方式设计和处理。
This paper discusses how the weld groove and the plate thickness affect the sheet metal manufacture processing, and how to design with reasonable method.
机场水泥混凝土道面结构参数包括板厚、混凝土弯拉强度和弯拉弹性模量、地基反应模量。
Airport cement concrete pavement structural parameters include slab thickness, concrete bending strength elastic modulus and foundation reaction module.
堆叠高度，每钻咀的最大钻次，进刀速度是否对板材类型，板厚，曾数，与孔尺寸进行管控？
Is the stack height, maximum hit per drill bit, and feeds and speeds as a function of laminate type, board thickness, layer count and hole size controlled properly?
盘状半月板特征性的MR表现是盘状半月板明显较正常半月板厚、大，MRI检查易于诊断。
The characteristic MR appearance of discoid meniscus is a meniscus which is significantly larger and thicker than a normal one, and which can be easily identified on MRI.
实际运用表明，该方法能够实现板形板厚的解耦，满足板带质量控制要求并具有良好的鲁棒性。
Practice proves this method can implement decoupling of steel shape and plate thickness, meets the requirements of steel plate quality, with excellent robustness.
焊接热引弧可调，适用于不同板厚工件的焊接引弧。推力电流可调，适用于各种焊接工艺要求。
Welding hot staring arc adjustable, applicable for starting arc of different thickness of work piece. Thrust current can be regulated, suitable for various welding process requirement.
本文在建立板形板厚耦合模型的基础上，采用反馈解耦控制方法，实现了板形板厚的解耦控制。
After the coupled process control model was developed, a feedback decoupling controller was proposed to decouple the model.
本文在建立板形板厚耦合模型的基础上，采用反馈解耦控制方法，实现了板形板厚的解耦控制。
After the coupled process control model was developed, a feedback decoupling controller was proposed to decouple the model.
应用推荐