args是这个信号量集数据结构中要通过IPC_SET来更新的值(在这个例子中会有解释)。
Args are the values to be updated in the semaphore set data structure through this IPC_SET (explained in the sample).
为了对信号量集数据结构进行初始化,可以使用IPC_SET命令来调用semctl系统调用。
In order to initialize the semaphore-set data structure, use the semctl system call with the IPC_SET command.
通过脑电图仪数据分析,科学家们来判断大脑的哪一部分控制着刹车信号,相应的以此来改进这个系统。
This data enabled the scientists to analyse the EEG information to determine which parts of the brain are key to braking. They improved the detection system accordingly.
本系统可以实现多路温度信号采集与显示,可以使用按键来设置温度限定值,通过进行温度数据的运算处理,发出控制信号达到控制蜂鸣器和继电器的目的。
The system achieves multi-channel temperature signal acquisition and control. Temperature limit is set by keyboard. The buzzer and relay are controlled by MCU.
这个实验将观察两种运用生理数据来强化功能性磁振造影信号侦测的办法。
This Lab examines two ways that physiological data can be used to improve fMRI signal detection.
通过对噪声特性的分析,提出了用前置带通滤波器来提高信噪比的方法,改善微弱信号时数据通信的效果。
This paper analyses the characteristics of noise and presents the mernod of promoting S/N by inserting a band-pass pre-filter, which can reduce the Pe in data communication under small signal.
测试数据处理采用了一些微弱信号检测技术来提高信噪比,从而提高了该系统的检测精度。
In the data processing system, methods for Weak signal detection are adopted to improve the accuracy.
工程上常用它来做信号处理、数据传送和抑制干扰等。
Engineering used it as signal processing, data transmission and suppress interference.
本发明所解决的问题是使用很少的、或者不使用运动向量数据辅助信息,来对视频信号进行编码和解码。
A problem solved by the invention is to encode and decode video signals using less or no motion vector data side information.
本文提出了用支持向量机来解决说话人辨认问题,结合语音信号的特点,解决了大数据量情况下支持向量机的训练问题。
This paper studies the speaker identification problem using support vector machine, and presents a SVM training method on large-scale training data according to the speech signal.
在提取过程中,通过对同步码的解码来定位水印信号嵌入的帧位置以及数据起始位置。
In the extract process, through the decoding of the synchronization code to locate the position of the watermark signal embedded in the frame as well as data starting position.
许多已知的残余泵浦检测和自动激光关断的方法利用数据信道上的信号损耗来检测有害发射。
Many known methods of remnant pump detection and automatic laser shut-down use loss of signal on the data channel to detect hazardous emissions.
数据处理单元可以响应于从任务调度器所提供的任务开始信号来执行任务。
The data processing units may perform tasks in response to task start signals provided from the task scheduler.
在GPS信号不可用时,利用SINS和GPS得到数据所形成的误差值来驱动卡尔曼滤波器估计系统误差。
Once the GPS signal is effective, the data gained from SINS and GPS can calculate error value which drives Kalman filter and estimates system error.
所述超声仪构造成,基于在第一对换能器之间传输的声信号来确定诊断数据。
The ultrasonic meter is configured to determine diagnostic data based on acoustic signals transmitted between the first transducer pair.
针对单点测试,可灵活地根据被测信号和应用环境的特殊要求来设定参数并有效记录存储数据。
During single test, the system can flexibly set parameters and effectively record data with the special requirement of the present environment and the tested signal.
文章给出了CCD在动态数据采集过程中实时跟踪信号的变化来调整采集速度和信号增益的方法。
This paper is on the methods of CCD on the adjustment in collecting speed and signal gain by tracing signal changes at real time in the course of dynamic data collecting.
存储单元和数据线用复位信号来控制,以使数据可在该半导体器件中被可靠地输出。
A memory cell and a data line are controlled with a reset signal, so that data can be reliably outputted in the semiconductor device.
一般来说,它先通过仪器硬件采集信号,然后通过软件编程来实现数据的显示及测量等功能。
Generally speaking, it first implements the signal acquisition on special instruments, and then realizes the data display and measure function by virtue of software programming.
针对某一确定数据采集系统中小波去噪时的阈值选择,提出以小波神经网络加标准信号来标定去噪阈值的方法,从而提高对信号的去噪性能。
This article proposed a method to mark denoising threshold from study function of wavelet nerve network in order to improve performance of denoising to signals.
系统选w 78le516单片机和CPLD来构造控制电路,用读写速度快、功耗低的低电压外部数据存储器CF卡存储采集完的信号。
The system select W78LE516 MCU and CPLD to construct the control circuit and use quickly read and write low power consumption, low-voltage external data memory CF card to save the signal.
控制电路翻译操作码,并且通过发送相应的控制信号来执行指令。这些信号控制数据的传送和ALU操作的执行。
Control circuitry interprets the opcode and executes the instruction by sending out the appropriate control signals to cause data to be moved or an operation to be performed by the ALU.
对角线信号处理法是本文所述方法的一个重要的特例,故对对角线采样数据的频谱进行了研究。本文建议的并行算法可以分别用向量处理器和专用硬件来实现;
The method of diagonal processing is an important special case of the proposed method and the properties of the frequency spectrum of diagonal-sampled data are examined.
数据电极驱动电路用以根据接收自主机的数据信号以及特定伽玛值信号来依序驱动数据电极。
The data pole driving circuit is used to drive data pole according to data signal from host computer and special gamma value signal.
硬件设计方面,根据柴油发电机组数据采集和处理的实际特点,用CPLD和DSP控制对六路同时采样的高速A/D转换器ADS7864来完成六路交流电信号的数据采集;
With regard to the hardware design, we use the CPLD and DSPs to control the ADS7864, which can sample the six signals of voltage and current at the same time;
光电信号、陀螺信号数据的采集和陀螺的控制由单片机来完成。
A MCU was used to acquire the photo detector data and the gyroscope signal.
该系统采用数据中频接收和高速数字信号处理技术来实现高分辨率、高速二维成像。
The digital IF receiving and the high-speed digital signal processing technologies are adopted to achieve the high resolution and the high-speed 2-d imaging.
硬件设计方面,根据电力系统中数据采集和处理的实际特点,用CPLD和DSP控制可对六路同时采样的高速A/D转换器ADS7864来完成六路信号的数据采集;
With regards to the hardware design, we use the CPLD and DSP to control the ADS7864, which can sample the six signals of voltage and current at the same time;
硬件设计方面,根据电力系统中数据采集和处理的实际特点,用CPLD和DSP控制可对六路同时采样的高速A/D转换器ADS7864来完成六路信号的数据采集;
With regards to the hardware design, we use the CPLD and DSP to control the ADS7864, which can sample the six signals of voltage and current at the same time;
应用推荐