由于价格上涨促进钢铁制造商的生产与原材料购买,6月份铁矿石进口上升了3.4%,为本年度第二大值。
Iron ore imports rose 3.4 percent in June to the second-highest level this year, as rising prices prompted steelmakers to produce more and buy more raw materials.
如果你通读这个材料,现在你应该也已经通读过了这一部分,你应该知道我们的音乐中有一种音符值。
If you've read through that material and you should have read through it by now you know that we have a value in music.
一个字节值数组,其中包含加密的收信方密钥材料。
An array of byte values that contain the encrypted recipient keying material.
冲击值是评价材料韧性的指标之一。
Impact value is one of the criteria to evaluate material toughness.
作为冲击豁免的考虑是根据文件和材料规范的要求,而不是根据材料分析的实际值。
As documented and permissible in the specification and not on the values of the actual deliveries.
磁熵变化值是衡量磁制冷材料好坏的一项重要指标。
The magnetic entropy changes were the benchmark for the application of the magnetocaloric materials.
试验结果表明,焊缝金属具有比较好的塑性变形能力,焊缝的损伤值与材料的累积塑性应变呈线性关系。
The experimental results showed that weld metal had enough plastic deformation capacity, and its damage value was linear with the cumulative plastic strain.
当铜合金表面的电镀纯铜层厚度超过一个临界值,表面电镀纯铜处理可以明显改善材料的耐氧化剥离性。
As the electroplating pure copper layer on copper alloy exceeds a critical thickness, the surface electroplating treatment can improve the copper alloy's resistance against oxidation failure greatly.
应用这个简便的关系式,可从采用不同吸波材料的两次模型实测值来推断原型目标的雷达散射截面。
By means of this simple formula, the RCS of prototype can be deduced by the measured values of two modelling targets coated with different kind of absorbent materials.
该校准泄露设备使用压缩的铜质材料,在一定的压力测试下显示泄露值。
The calibrated leak device USES compressed copper material to present a leak at a certain test pressure.
加入片状填料可增大材料内部的剪切运动,使内耗值增大。
Adding the planar filler can increase the shearing motion and the internal dissipation in materials.
得出了结论:由温度变化引起的齿冠热应力值很小,在进行齿冠材料设计时可以不考虑热应力的影响。
It was concluded that the heat stress due to the change of temperature was very low so the heat stress could not be considered for the material design of the crown.
材料断口分维值随着晶须方向角的增大而增大。
The fractal dimension of the material fracture rises with the increase of whisker direction Angle.
测量各种建筑材料强度值的常用设备是液压式压力试验机。
The conventional equipment for measuring the strength of various construction materials is the hydraulic material testing machine.
根据可燃物的火灾荷载密度和装饰材料的燃烧性能确定火灾增长系数的值。
And based on the fire load density of the combustible and combustibility of decoration material, calculate the value of fire increasing modulus.
屏蔽材料的用材量和磁化率均存在最佳值范围。
For both the shield material and the magnetic susceptibility, there are the best value ranges.
基于材料的循环塑性预测了疲劳裂纹扩展的门槛值。
Fatigue crack growth threshold is predicted based on materials cyclic plasticity.
通过施工实例,介绍了预应力材料、机具伸长值计算及张拉施工。
This paper Concentrates on the introduction of pre-strain materials, machine tool, calculation of extending value and extensive construction.
测量CT孔径位置以及高密度材料治疗床板可能对CT值产生的影响。
Measured the effect of the CT value when the phatom in different position of CT and the high density material of CT bed.
降低主要建筑材料的内含能量强度值和单位建筑面积内建筑材料的使用量,是降低施工初始能耗的有效途径。
It is the key for the reduction of construction initial energy use to reduce the embodied energy intensity and quantity in per usable floor area of the main materials.
如何最大限度地提高材料的热电优值是当今热电材料研究的主要问题。
It is the key problem to fully improve the thermoelectric figure of merit.
由于复合材料的引入,应该用“设计值”和“许用值”来代替“设计许用值”。
In this paper the authors proposed that the term of "design allowables" should be replaced by "design values" and "allowables" as composites were used in aircraft structures.
在单材料优化振动钻削实验的基础上,进行了两种叠层材料按优化值变参数的振动钻削实验。
On the basis of optimized vibratile drilling mono -material test, the optimized value variable parameter is selected for vibratile drilling test of two kinds laminated materials.
在这些温度下,固体材料有较低的值比热,所以再生必须作出了意想不到的材料,如棉花。
At these temperatures, solid materials have lower values for specific heat, so the regenerator must be made out of unexpected materials, such as cotton.
在单材料优化振动钻削实验的基础上,进行了两种叠层材料按优化值变参数的振动钻削实验。
On the basis of optimized vibratile drilling mono-material test, the optimized value variable parameter is selected for vibratile drilling tesl of two kinds laminated materials.
应用dynaform软件进行模拟计算分析,研究了摩擦系数、模具间隙、材料参数(n,r值)等因素对零件成形的影响。
By simulating in DYNAFORM, the influences of the factors, such as the friction coefficient, die clearance and material parameter 'sn and r, on stamping formability were studied.
在原材料分析的基础上,以水泥率值公式法研制了配方煤粉。
Based on raw material analysis, compound coal powder is developed through the method of cement rate quantity.
试验结果表明,巴克·豪森噪声强度值mp与铁磁材料的硬度值之间存在单调的关系曲线。
Experimental results indicated that there is a monotonic relationship between the hardness of ferro magnetic materials and Barkhausen Noise strength, MP.
试验结果表明,巴克·豪森噪声强度值mp与铁磁材料的硬度值之间存在单调的关系曲线。
Experimental results indicated that there is a monotonic relationship between the hardness of ferro magnetic materials and Barkhausen Noise strength, MP.
应用推荐