本文阐述变截面开口薄壁杆件的有限分析法。
Pnesents the finite analytic method of the open Thin-walled bars with variable section.
阐述钢索结构的内力及位移计算的有限分析法。
A finite analysis calculation method of the internal force and displacement on the wire rope structure is presented.
用计算精度较高的有限分析法计算这类定解问题，计算结果与试验资料基本吻合。
The Finite Analytic Method is used to solve this problem. The calculated results of the inclined buoyant jets are well compared with the experimental data.
采用气-液两相流两方程湍流模型，结合混合有限分析法，对静止环境中气泡射流进行数值模拟和分析。
A two phase turbulence model and hybrid finite analytic method (HFAM) are used to predict the behavior of bubbly jet in static environment.
本文系统地介绍了数值计算中的各种方法，主要有有限体积法、自适应网格、有限分析法、有限元法等。
Some kinds of numerical computation methods are recommended systematically including finite volume method, finite analysis method, finite element method and self-fit mesh method.
采用有限差分法和混合有限分析法对耦合模型进行数值求解，并分析了启动压力梯度对地下水污染浓度的影响。
The finite difference method is used to solve the coupling model, and the influence of starting pressure gradient on the distribution of groundwater pollutant concentrations is analyzed.
一维理论解和其他格式的二维数值结果符合良好，表明非交错网格下的混合有限分析法能正确有效地求解溃坝问题。
The results show that the numerical solution of the dam-break problem can be obtained by hybrid finite analytic method correctly and effectively.
采用作者给出的三维紊流模型，结合混合有限分析法及交错网格对浅水型河道中扩散器垂向排放的流动进行了数值计算。
A three dimensional mathematical model for calculating the steady flow of multiple non buoyant turbulent jets in a cross flowing is present in this paper.
本文介绍了一种求解地下水流问题的有限分析法，该方法将解析解结合到数值方法中，从而提高了计算精度，改善了稳定性。
This paper introduces a finite analytic method of solving groundwater flow. This method combines analytic solution with numerical method, and can rise computational accuracy and improve the stability.
通过引入有限元方法，混合分析法可适用于结构可靠度问题。
By introducing the FEM, the mixed method is extended to perform finite element reliability analysis.
对计算得到的轮包成形极限图、应力应变分布图进行了分析，并采用基于网格分析法的物理实验验证了有限元建模的可靠性和正确性。
The validity of modeling, the accuracy and reliability of simulation results for stamping forming processes of hubcap are affirmed on the basis of grid strain analysis technique.
在土体与结构动力相互作用理论的基础上，提出用有限元和无限元耦合分析法对地铁隧道结构进行抗震分析。
Coupling analysis method of finite element and infinite element is proposed to be used in the structural anti-seismic analysis of metro tunnel on the basis of soil-structure interaction theory.
不足的是，当前税务部门在使用峰值分析法中，所考虑的指标偏向于经验，而且考虑的面比较有限。
What insufficient is that the index considered by the tax department at present when using the peak value analysis is partial to experience and the scope of consideration is quite limited.
在汽车结构设计中，有限元分析法已经成为必备的技术手段。
The analysis of a bus chassis frame by FEM is now becoming an essential technique to design bus structure.
研究结果表明，弹塑性有限元分析法预测的寿命偏低，由残余应力可以较准确地确定最大应力应变循环。
The result shows that predicting life by elasticity-plasticity finite element analysis is low and the maximal stress-strain cycle can be calculated accurately by the residual stress method.
提出了地基沉降分析中的不确定因素，简述了地基沉降的直接概率分析法、随机有限元法。
Uncertain factors of foundation subsidence were put forward. Direct probability method and random finite element method for foundation subsidence analysis were presented.
基于滑面上应力分析法和强度折减法是边坡稳定有限元分析方法中两类主要的方法。
Stability method based on slip surface FE stress and shear strength reduction method are two principal methods for FEM slope stability analysis.
用机械优化设计技术和有限元分析法，对立式注射机偏心受力活动模板进行了结构优化。
The structure of eccentric pressured moving moulding board of vertical injection press was optimally designed by using the machine design and the finite element analysis.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
在总结现有施工模拟方法的基础上，结合循环前进分析法和有限元软件Ansys，提出了改进的循环前进分析法。
After discussing existing methods of construction simulation, an ameliorated analysis method of cycle-forward is developed, which is based on the method of cycle-forward and ANSYS software.
有限元法与模态分析法是本文的两大理论支柱。
Finite element and modal analysis are the support of theory.
有限元分析法在理论上较成熟，但因其存在土体模型和土性参数难确定等困难，难以实际应用。
The finite element method is mature in theory, but it is difficult to fix the earth model and the soil parameters, so being difficulty to be practice applied.
本文运用ANSYS分析软件，利用物理环境分析法建立了三层套组合式扁挤压筒内压-预紧-热载荷耦合有限元模型。
With the FEA software ANSYS, the coupling model of coupling the pressure-prestress-heat stress flat container of three-layer is built using the physical environment approach.
最后运用多层因子分析法对我国汽车企业的13家股份有限公司进行了综合评价。
At last, it use the analytic approach of the multi-layer factor to make comprehensive appraisal to 13 Limited Companies of Chinese automobile enterprises.
目前，计算总纵极限弯矩的方法主要有三种，即非线性有限元法，理想结构单元法和逐步破坏分析法。
There are three main methods by far, nonlinear finite element method, idealized structural unit method and progressive collapse analysis method.
用弹塑性截面分析法、非线性有限元法计算了梁的承载力与挠度，理论计算值与试验值吻合良好。
A nonlinear finite element method analysis is conducted that corroborates the results from the experimental study and inelastic section analysis.
介绍连续反应精馏过程设计的两种研究方法：静态分析法和有限元正交搭配ocfe法。
Tow researching methods of design of continuous reactive distillation processes are addressed in this paper Analysis of statics and orthogonal collocation on finite elements (OCFE).
工程上经常遇到反分析问题，有限元分析法是反分析的有力工具。
In the project frequently meets the counter-analysis question, the finite element analytic method is counter-analysis powerful tool.
本文综述了结构声传递的四种数值计算方法：统计能量分析、有限元法、阻抗分析法、波动分析法。
Four kinds of numerical computing methods for structure_borne propagation are summarized: Statistical Energy Analysis, Finite Element method.
本文综述了结构声传递的四种数值计算方法：统计能量分析、有限元法、阻抗分析法、波动分析法。
Four kinds of numerical computing methods for structure_borne propagation are summarized: Statistical Energy Analysis, Finite Element method.
应用推荐