一般的摘要不会多于200字，并且概括地介绍文章主要信息，包括引言，方法，结果和讨论。
The abstract is usually less than 200 words and provides basic information from the paper's major sections - introduction, methods, results and discussion.
从上一次的评估和建立聪明目标（从反面）到下一次评估这段时间来回顾个人的成就。考虑怎样和何时衡量变化；在你的处置中有很多测量方法，包括：观察；评估期间的讨论；不拘形式的一对一的回顾 ；团队会议；商业结果的考试 ；其他业绩指标；调查；反对能力的评估。
Take time to review the individual’s achievements since the last appraisal and establish SMART objectives (see opposite) for the period until the
这篇论文应该包括每个实验的介绍、材料、方法、结果和讨论，还要有一个最后的讨论，综合这三个实验的重要性。
The paper should include introduction, materials, methods, results, and discussion for each experiment, as well as a final discussion of the significance of the three experiments together.
结果在Spotify，我和同事及运维主管讨论了看板方法，然后决定试一试。
Anyway, once at Spotify, I discussed Kanban with my colleagues and our Operations director, and we decided to give it a shot.
讨论了气足、承片台系统及STAMP的设计和计算方法，并给出了设计数据与计算结果。
The air foot, wafer supporting stage system, the design and calculating methods of STAMP are discussed, the design data and calculating results are given.
介绍了电镀片的制作工艺和方法，对实验结果进行了分析和讨论。
The facture technics and methods is introduced, also the experiment result was analysed and discussed.
基于从中国文学作品中选出的语料，作者在讨论研究结果时运用了数据统计的方法和实证的方法。
Based on the data chosen from Chinese literature works, the author USES a statistical method and an empirical method to discuss the findings.
文章主要工作包括建立演化计算实验模型，讨论实现方法和结果。
Based on establishing a framework and the evolve model of computational experiment, we propose, in this paper, detail method and results.
本文结合实例详细阐述了该方法的基本原理和操作步骤，并在误差分析的基础上讨论了影响测试结果的主要因素。
Combining with an example, this paper clarified the basic principle and measuring steps of the method in detail, and discussed the main factors affecting the results on the basis of error analysis.
在此基础上，根据已有理论结果和实际资料，对利用热释光方法断代及推测断层活动方式的可能性等问题进行了讨论。
Based on the result and the existing theory, the applicability of thermoluminescent method to dating the faulting and to determining the sliding mode along the fault is discussed.
文中给出了取样积分器的工作原理，以及检测的原理、方法、结果和讨论。
Operation principles of the integrator, detective principles, methods, results and discussions are presented.
为了研究玻耳兹曼图法和谱线绝对强度法对测量结果的影响，讨论了电弧加热发动机羽流的光谱诊断方法，并建立了一套光谱诊断系统。
To determine the difference of the measurement results from different measuring methods, diagnostic principle for arcjet plume was discussed and a set of spectral diagnostic system was established.
讨论了单位长度伸长接地体的冲击特性真型试验方法，给出了冲击火花放电特性和伏安特性的试验结果。
This paper discusses a test method for impulse characteristic of real extended grounding electrode in unit length and gives some experimental results.
阐述了线性规划鞍点算法原理，讨论了解题器各模块的设计方法，给出了软件流程图和实验结果。
This paper proposed the principle of the saddle point algorithm, discussed the developing method about the new solver, provided the flow chart and the computational results of the new solver.
主要叙述了MM-2装置通过ECRH加热等离子体并形成热电子环的实验诊断方法，原理、结果和讨论。
The diagnostic methods, experiment results and some discussion in MM-2 ECRH experiment for heating plasma and building a hot electron ring have been presented in this paper.
讨论了所得结果的适用性和方法的价值。
The value of this method and the applicability of the result are discussed briefly.
本文讨论了这种聚光系统的计算方法和结果，并分析了它的性能。
In this paper, the method and the results of the calculation is described and the performance of this new optical system is analysed.
作者从词汇知识习得的本质和不同的学习方法两方面讨论试验结果。
This result is discussed in terms of the nature of vocabulary knowledge acquisition and the effect of different ways of learning on the outcome.
本文讨论了污水中油的采样和结果计算方法。
Sampling method and calculating method of concentraction of oil in sewage water was discussed.
对目标的获取、在物理坐标系中的定位和延时补偿以及控制方法等问题进行了讨论，并给出结果。
The paper discussed how to extract the object, locating in physical coordinates, time delay compensation and control method and gave the result in detail.
讨论了离子色谱法测量中影响测量不确定度的因素并进行了分析和评定，给出了测量结果的表述方法。
The influence factors of uncertainty of measurement in ion chromatography are discussed and analyzed, and the expression method of measurement results is given.
本文讨论了湿法复印的基本原理，并报导了试验的方法和结果。
This paper discusses the basic principle of wet printing and reports the experimental methods and their results.
通过理论分析和试验结果，讨论了一种新颖的测定渗碳层深度的方法——电阻法。
A new method, named resistance method, for determining the depth of carburized layer is presented by means of theoretical analysis and test results.
最后以中国川滇地区为例，利用GPS观测资料计算了地应变率场，并对计算方法和结果进行了分析讨论。
Finally, with Chinese Sichuan-Yunnan area as an example, the strain rate is calculated by GPS data and some discussions of computation methods and results are made.
又采用了对偶变量蒙特卡洛法、JC方法、蒙特卡洛方法计算焊接结构断裂失效概率，并比较和讨论了这些结果。
The fracture probability was calculated also by using of Monte Carlo method of dual variable, method of JC and Monte Carlo method. The calculation results were compared and discussed.
叙述了腈氯纶废原液的产生原因、排放点及其组成，详细地阐述了废原液的工业化回收方法和工艺参数，最后对结果进行了讨论。
The article related to reason of waste dope, draining point and composition. Expounded industrially recovery method and process parameter of waste dope, and discussed the results.
利用同一模型的理论记录和物理实验记录的反演计算结果对提出的方法进行了验证，并讨论了进一步提高成象精度的方法。
Using the inversed results for same model with theoretical and physical method, we tested the proposed theory and discussed the method to improve the imaging precision further.
本文讨论了这种方法的理论基础，ANN模型的结构及用这种方法进行参数和电压稳定性识别的结果。
This paper alsodiscusses the theoretical basis, the architecture of ANN models, the characteristic parameters and voltage stability recognizing result using this new approach.
从富氧气化的原理和特点出发，根据空气气化的结果，讨论说明中热值气化装置的设计依据和参数计算方法。
Based on the results of biomass gasification with air, this paper discusses the gasifier design and parameter calculation which are suitable for oxygen rich air gasification.
从富氧气化的原理和特点出发，根据空气气化的结果，讨论说明中热值气化装置的设计依据和参数计算方法。
Based on the results of biomass gasification with air, this paper discusses the gasifier design and parameter calculation which are suitable for oxygen rich air gasification.
应用推荐