这种方法不如精细的数值分析法来的精确。
The method is generally less precise than refined methods of numerical analysis.
拱坝坝肩岩体的稳定分析方法包括数值分析法和模型试验法。
The stability analysis of arch dam abutment rock mass include numerical method analysis and model experiment analysis.
拱坝坝肩岩体的稳定分析方法包括数值分析法和模型试验法。
The methods of arch dam abutment rock mass include numerical method analysis and model experiment analysis.
模型试验实测沉降量与用分层总和法、数值分析法计算结果接近。
The settlement data of model tests are in general agreement with the calculated values on models of numerical analysis.
模型试验实测沉降量与用分层总和法、数值分析法计算结果接近。
The values of the settlement are approximation with calculated value of summating for each layer and calculated values on prototype of numerical analysis. Therefore, this method is very feasible.
分别归纳10种优秀水力模型，采用数值分析法拟合出经验系数方程序。
The empirical coefficient equations are drawn out by numerically analyses of 10 kinds of hydraulic models with excellent performances.
数值分析法，尤其是有限单元法已经成为岩土工程数值分析和优化设计的重要工具。
The numerical analysis method, especially the finite element method (FEM) has become the primary tool of numerical analysis and optimization design in geotechnical engineering.
确定岩体变形和强度参数最常用的方法有三种：原位试验法、经验关系法及数值分析法。
There are three kinds of methods to confirm the rock deformation and intensity parameters:in situ test, experiential relation method and numerical analysis method.
焊接变形分析方法包括实验法、解析法、数值分析法、等效载荷法等，常用的是后两种方法。
The usual prediction methods of welding deformation include experimental method, analytical method, numerical method and equivalent load method, and the latter two methods are more commonly used.
利用回归分析法和数值分析法对击实试验数值进行分析，可以较准确地求出最大干密度和最佳含水量。
Using the regress analysis method and the numerical analysis method to obtain the extremum of the compaction test, we may accurately extract the biggest dry density and the optimum moisture content.
采用三维有限元数值分析法，通过建立三维有限元计算模型，分析堵塞长度对堵塞区有效应力场的影响。
Three dimensional finite element computing model is established and the effect of stemming length to deep hole bench blasting is studied by three dimensional finite element method.
同时利用电子表格绘图并处理试验数据，特别是用数值分析法与绘图相组合，可以提供较为准确的试验结果。
Using the electronic forms to draw pictures and process the test data, especially combining the value analytic method with the cartography, it may provide more accurate test result.
传统的预测深井动压巷道围岩移近量的方法主要有：解析法、数值分析法、回归分析法、概率分析法、模糊分析法等。
With the non-line finite element method, the numberical value calculation on the stress and deformation of surrounding rock of deep mine roadways has been presented.
数值算例验证了混合分析法的应用、效率和精度。
The applicability, efficiency and accuracy of the mixed method are verified by numerical examples.
本文重点是运用数学理论分析法，对正挤压成形数值模拟后置处理可视化进行了较为深入的研究。
In this paper, the main idea is that the visualization in the numerical simulative post-processing of forward extrusion deforming was studied by using the method of mathematical analysis.
实例数值计算结果表明，灵敏度分析法对接触器结构设计参数的局部调整与优化设计提供了一条有效途径与理论依据。
The calculated result shows that the sensitivity analysis method gives convenience and a theoretical basis for the partial adjustment of the contactor structure design parameter and optimum design.
一维理论解和其他格式的二维数值结果符合良好，表明非交错网格下的混合有限分析法能正确有效地求解溃坝问题。
The results show that the numerical solution of the dam-break problem can be obtained by hybrid finite analytic method correctly and effectively.
本文系统地介绍了数值计算中的各种方法，主要有有限体积法、自适应网格、有限分析法、有限元法等。
Some kinds of numerical computation methods are recommended systematically including finite volume method, finite analysis method, finite element method and self-fit mesh method.
分析研究采用专家法、无量纲化方法和加权分析法进行计算，得出理想成本及运行收益的数值。
By means of a comprehensive calculation which uses the expert method, no-dimension analysis and weighted analysis method reaches an ideal cost and operation income analysis result.
本文介绍了一种求解地下水流问题的有限分析法，该方法将解析解结合到数值方法中，从而提高了计算精度，改善了稳定性。
This paper introduces a finite analytic method of solving groundwater flow. This method combines analytic solution with numerical method, and can rise computational accuracy and improve the stability.
结合大功率柴油机提升功率的数值计算工作，介绍了评估气缸盖螺栓强度的两种方法：静强度分析法和疲劳强度校核法。
According to the numerical simulation of heavy-duty diesel engine to raise power, two methods to assess the strength of cylinder head bolt, static calculation and fatigue stress check, are introduced.
本文综述了结构声传递的四种数值计算方法：统计能量分析、有限元法、阻抗分析法、波动分析法。
Four kinds of numerical computing methods for structure_borne propagation are summarized: Statistical Energy Analysis, Finite Element method.
目前自然通风主要有三种研究方法：简单的理论分析法、实验法和数值模拟法。
There are three main research methods in natural ventilation: simple theory analyse method, experimental method and numerical simulation method.
两相流不稳定性理论分析方法可以分为两大类：一类是数值解析法，另一类是近似分析法。
Theoretical approach of two-phase flow instability can be divided into two categories: numerical analysis and approximation analysis.
采用有限差分法和混合有限分析法对耦合模型进行数值求解，并分析了启动压力梯度对地下水污染浓度的影响。
The finite difference method is used to solve the coupling model, and the influence of starting pressure gradient on the distribution of groundwater pollutant concentrations is analyzed.
多因素加权分析法与储层数值模拟法相结合是一种有效的煤层气可采性评价方法。
The combination of multifactor weighted analysis with reservoir simulation is an effective means to evaluate CBM recoverability.
采用气-液两相流两方程湍流模型，结合混合有限分析法，对静止环境中气泡射流进行数值模拟和分析。
A two phase turbulence model and hybrid finite analytic method (HFAM) are used to predict the behavior of bubbly jet in static environment.
采用作者给出的三维紊流模型，结合混合有限分析法及交错网格对浅水型河道中扩散器垂向排放的流动进行了数值计算。
A three dimensional mathematical model for calculating the steady flow of multiple non buoyant turbulent jets in a cross flowing is present in this paper.
采用作者给出的三维紊流模型，结合混合有限分析法及交错网格对浅水型河道中扩散器垂向排放的流动进行了数值计算。
A three dimensional mathematical model for calculating the steady flow of multiple non buoyant turbulent jets in a cross flowing is present in this paper.
应用推荐