此排样模型可用于一般级进模的工序排样设计。
The model can be used in the design of the strip layout of general progressive dies.
介绍资料夹底座多工位级进模的排样设计、模具结构及工作过程。
The layout design, the structure and the working process of multi-position progressive die for pedestal of paper file have been introduced.
分析了摇臂件的冲压工艺性，介绍了其级进模总体结构及排样设计方案。
The manufacturability of stamping for the rock arm was analyzed. The general structure and the stock layout design proposal of the progressive die were introduced.
包括：冲压工艺设计、排样设计、级进模结构设计及主要工作部件设计等。
Including: punching press process design, arrange kind design, grade enter mould structure design.
分析了端子的工艺特点，介绍了零件的排样设计方案、模具结构及主要特点。
The technological characteristics of the terminal were analyzed. and the layout design of the part, the structure and mainly characteristics of the die were introduced.
分析了带凸缘密封固定盖的工艺性，介绍了级进模总体设计结构和排样设计。
The manufacturability of a fixing cover with flange seal was analyzed. The general structural design and layout scheme of a progressive die for the cover were presented in detail.
叙述了卷筒排样设计及模具结构设计，并介绍了卷筒凸模零部件的详细结构设计。
Both layout design and die structure design are stated, and the structure design of convex die components of rolling drum are introduced in detail.
同时对条料载体和排样设计影响因素，以及如何对其设计质量控制问题进行了介绍。
The material carrier, layout design factors and how to control the quality of design problems were introduced.
根据支撑架的冲压工艺性，进行了排样设计与模具结构设计，以及切舌定距方式的应用。
According to the punching technology character of brackets, layout design and die structural design are carried out, as well as stamping and bending fixed distance fashion is applied.
分析了接线片的结构特点和冲压工艺性，介绍了零件的排样设计方案、模具结构及主要特点。
The structure characteristics and pressing process of the connection piece were analyzed, and the layout design of the part, the structure and main characteristics of the die were introduced.
对冲片连续模的结构进行分析，阐述了多工位连续模的排样设计、条料载体设计等主要内容。
Firstly the structure of stamping progressive die was analyzed, and then the design of main contents such as the multi-position progressive die of layout design and strip carrier were stated.
介绍了六角形工件少废料级进模设计中的排样设计、自动送料、模具结构及模具主要零部件设计等要点。
The layout design and the automatic feeding system of the few-scrap progressive die for hexagonal parts were introduced. And the die structure and the design of the main parts of the die were stated.
并进行了排样设计和各种工艺参数的计算，最终采用拉深、挤边复合模具，可使模具结构更为合理而有效。
Then layout design and various process forces of calculation is introduced. Finally drawing and extrusion compound dies is adopted to make die structure better rationalization and effectiveness.
分析了盖板零件的冲压成形工艺，介绍了零件排样设计方案，阐述了模具结构及其主要零件的设计和制造工艺。
Analyzed the forming process of the cover plate, introduced the layout design, and expound design and manufacture process of die structure and its main components.
分析了电冰箱前顶板零件的工艺特点 ，介绍了零件的排样设计方案、模具结构、工作过程及模具关键零件的设计要点。
The paper introduces the forming technology of the front upper plate of refrigerator, and expounds some applied skill on the die design.
通过分析级进模工序排样设计中的模糊性准则，利用模糊综合评判理论建立了对排样方案进行优化数学模型，并通过了事例验证。
By analyzing the fuzzy regulation for design of strip layout on progressive die, a optimum model has been set up based on the theory of fuzzy multi-factorial evaluation, which has been verified.
分析了支架的冲压工艺，给出了排样设计方案和相应的模具结构，并就主要零件设计加工中应注意的问题进行了分析，提出了解决办法。
Analyzing the craft features of a punching piece, ascertain the process and scheme of a progressive die blank layout, and the design of main die working parts and final assembly structures.
介绍了IC引线框架级进冲模的特点并着重讲述了其排样设计中的整形工位和模具结构中的卸料、微调和安全机构，可供精密级进冲模设计参考。
The traits of progressive die for IC lead frame have been introduced with emphasis on the ironing stage in layout design and stripping micro-adjustment, safety setup of the structure.
介绍一种计算机皮革缺陷检测与排样切割系统的构成原理与设计思想。
The compositional principle and design concept of a computerized defects detecting nesting and cutting system for leather were introduced.
毛坯优化排样是冲压工艺数字化设计中的重要环节。
The optimization of blank layout is of great importance in the design of stamping die.
通过该冲件特点的工艺分析，确定级进模排样方案过程和模具主要工作零件及模具总装结构设计。
Analyzing the craft features of a punching piece, ascertain the process and scheme of a progressive die blank layout, and the design of main die working parts and final assembly structures.
通过对插座连接焊片结构特点的分析，确定该冲压件的排样方案，设计了一副级进模。介绍了主要工作零件及模具总装结构设计。
Through analysis of structure of the socket weld connection pieces, determined the layout project, designed a progressive die. Introduced the design points of main parts and die structure.
第二部分，对零件排样图的设计，完成了材料利用率的计算。
The second part, the part layout diagram design, complete material utilization calculations.
级进模工步排样是级进模设计的核心，理论上属NP完全问题。
Strip layout is the key procedure in progressive die design, it is known as a NP hard problem.
分析了零件的特点，介绍了级进模设计要点，总体设计结构和排样方案。
Parts characters are analyzed, as well as, the critical progressive die design points, general design structure and layout program are introduced.
介绍了凸轮零件的排样、精冲压力计算及模具结构设计。
The blank layout of the CAM part, the calculation of the fine blanking force and the design of the die structure were introduced.
工步排样是级进模设计的核心，智能化工步排样是冲模设计专家系统的主要研究内容。
Strip layout is the kernel in progressive die design and intelligent strip layout is the main con tent of stamping die expert system.
介绍了摆动连杆的冲压工艺分析过程、载体的合理选择、带料排样方案的确定及级进模模具的总装结构设计。
Introduced the pressing technology analysis, the carrier choosing, layout designing and structure design of the progressive die for the swinging connecting rod.
分析了转换推杆零件的冲压工艺，介绍了带料排样方案及级进模模具结构设计。
The pressing process of transforming throwout lever is analyzed, Layout of multi-position progressive and die structure are introduced.
分析了文件夹手柄多工位级进模的冲压工艺，设计了排样图及模具结构。
The stamping technology of multi position progressive die of handle of file clip was analyzed. The layout and mould structure were designed.
应用推荐