节段性流动增加最多的一个因素1000年在单轴拉伸蠕变。
Segmental mobility increases by up to a factor of 1000 during uniaxial tensile creep.
合金拉伸蠕变曲线具有典型的三阶段特征，即较短的减速蠕变阶段和较长的第三蠕变阶段。
The tensile creep curve was composed of the typical primary creep stage, steady-state creep stage and the accelerated creep stage.
K46合金的高温拉伸蠕变曲线表现出非常长的稳态蠕变阶段，而较高的蠕变塑性来自于加速蠕变阶段。
It is found that the creep curves of alloy K46 consist mainly of a longer steady-state creep stage and an accelerated creep stage, which occupies the most creep strain.
比较了获得拉伸蠕变破坏荷载-时间曲线以及蠕变应变-时间曲线的试验方法，给出了外推这两种蠕变曲线数据的处理步骤。
The methods of creep test to get both curves of tensile creep rupture load vs time and creep strain vs time are compared. The procedures to extrapolate the two types of creep curves are presented.
基于平头压痕理论和蠕变损伤理论，提出了采用平头压痕试验和拉伸蠕变试验相结合的方法来确定铝合金2a12的蠕变剩余寿命。
A method of predicting the residual creep life of aluminum alloy 2a12 by using indentation test method with flat cylindrical indenters was proposed.
对拇指掌指关节侧副韧带进行拉伸应力松弛、蠕变实验。
The pulling stress relaxation and creep tests on them were done.
这些工作主要讨论了金属泡沫材料的拉伸、压缩、能量吸收、动态冲击、失效准则、本构关系、蠕变、疲劳和断裂等力学性能。
They are mainly concerned with the tensile and compressive behavior, energy absorption, dynamic impact, failure criterion and constitutive relation, creep, fatigue and fracture of these materials.
论述了辐照后包壳管在热室中的拉伸、爆破、蠕变等试验方法，比较辐照前后包壳力学性能的变化。
Tensile test, tube burst test and creep test of irradiated cladding in hot cell were discussed. The changes of mechanical properties of cladding before and after irradiation were compared.
以退火纯铜及正火铝青铜在轴向拉伸下进行室温静、动态蠕变试验。
In this paper, creep tests were carried out on annealed pure copper and normalized bronze containing Al under static and cyclic tension at room temperature.
实验项目有等应变率拉伸、等应力蠕变和控制应变幅的等应变率塑性循环。
The experimental items of the tests are tension of constant strain rate, creep at constant stress, and strain controlled low cycle fatigue of constant strain rate.
韧带进行拉伸应力松弛、蠕变实验。
The pulling stress relaxation and creep tests on them were done.
研究了一种无钴镍基铸造 高温合金K46的高温拉伸、蠕变和持久性能，并与K412合金进行了比较。
The tensile, creep and stress-rupture properties at high temperature of a cast nickel-base superalloy K46 without cobalt, as comparison with superalloy K412, were investigated.
测量材料粘弹性性质的传统方法是单轴拉伸松弛或蠕变实验。
Traditionally, the uniaxial tensile test, relaxation or creep, are often used to study the viscoelastic properties of material.
这些工作主要讨论了金属泡沫材料的拉伸、压缩、能量吸收、动态冲击、失效准则、本构关系、蠕变、疲劳和断裂等力学性能 。
The dynamic impact energies of 16MnR welded joints were determined with high speed impact test, and the influencing factors and fracture morphology were studied.
这些工作主要讨论了金属泡沫材料的拉伸、压缩、能量吸收、动态冲击、失效准则、本构关系、蠕变、疲劳和断裂等力学性能 。
The dynamic impact energies of 16MnR welded joints were determined with high speed impact test, and the influencing factors and fracture morphology were studied.
应用推荐