证明了在非局部弹性固体中存在着非局部体力矩。
It is shown that there is the nonlocal body moment in the nonlocal elastic solids.
最近，弹性固体的位错理论已经被应用于地震问题。
Recently, the theory of dislocation in elastic solids has been applied to the earthquake problem.
为了举例阐明以上的分析，我们考虑一种线性的弹性固体。
To illustrate the foregoing analysis, consider a linear elastic solid.
对弹性固体中的声场方程应用时域有限差分法，进行了二维声场特性研究。
This article USES a finite difference time domain method to study the two-dimensional sound field characteristics of elastic solids based on elastic solid equations.
本文提出一种非密接界面模型，其中两个弹性固体被一个粘性流体薄膜所分开。
One of the uncoupled boundary models has been suggested, in which two elastic solids are separated by a viscous fluid membrane.
固相质点的偏振特性与均匀弹性固体自由界面上的瑞利波的偏振有某些类似之处；
The polarization property of material point of solid phase has some similarities with the polarization of Rayleigh Wave in free surface of uniform elastic solid;
应力函数法是求解应力边值问题和混合边值问题，诸如弹性固体接触问题简单、直接的方法。
Stress function method is a simple and straight approach for stress or mixed boundary value problems, such as solids under contact.
本文基于非局部连续统场论和非线性连续体力学理论，建立了非局部非对称弹性固体的非线性理论。
In this paper, a nonlinear theory of nonlocal asymmetric elastic solids is developed on the basis of basic theories of nonlocal continuum field theory and nonlinear continuum mechanics.
用这种方法得到的“固体烟”气溶胶有良好的弹性和导电性，正是理想的制造传感器的材料。
The resulting "frozen smoke" aerogel is flexible and has conductivity that makes it an ideal sensor.
大多固体，一经拉伸或弯曲，都会出现弹性变形这一过程。
Most solids, if pulled or twisted, will give a little in a process known as elastic deformation.
固体颗粒介质成形新工艺，是采用固体颗粒代替刚性凸模(或弹性体、液体)的作用，对金属板料成形的工艺。
Solid granules medium forming new technology (SGMF) is a technology which USES solid granules medium instead of rigid punch (or elastomer, liquid) to achieve the sheet forming.
本文介绍了低能电子在固体中的弹性散射和非弹性散射，及其在电子束显微分析中的一些应用。
The elastic and inelastic scattering of low energy electrons in solids and some of its applications in electron beam microanalysis are described.
对于标准线性固体，由于弹性滞后效应，虽然位移分量也随时间而增长，但它将趋于某一极限值。
For standard linear solids, because of the effects of retarded elasticity, although the displacement components will also increase with time, they will tend to their limit values.
本课程检验了固体中的电子以及晶格振动的经典和量子模型，重点强调于弹性性质，电子输运过程和热容的物理模型。
This course examines classical and quantum models of electrons and lattice vibrations in solids, emphasizing physical models for elastic properties, electronic transport, and heat capacity.
本课程考察了固体中的电子以及晶格振动的经典和量子模型，重点考察了弹性性质，电子输运过程和热容的物理模型。
This course examines classical and quantum models of electrons and lattice vibrations in solids, emphasizing physical models for elastic properties, electronic transport, and heat capacity.
得出膨胀力取决于限制膨胀的固体介质的弹性模量的结论。
We get the conclusion that the expansive pressure is determined by elastic modulus of the expanded solid medium.
粘弹性分析采用特殊的三元素标准线性固体模型拟合实验数据。
Viscoelasticity was analyzed by the special three element standard linear solid model.
本文从热弹性基本方程出发，理论上研究了非金属固体材料受激光热弹激励超声时，光穿透效应对所产生声波的影响。
The effect of optical penetration on laser thermoelastically- generated ultrasound in nonmetallic solids is studied theoretically on the basis of thermoelastic equations.
弹性，是大多数固体材料在低应力作用变形时表现出来的一种力学行为。
Elasticity is the most solid materials in low-stress deformation demonstrated by a mechanical behavior.
介绍了固体颗粒介质成形新工艺，即采用固体颗粒介质代替刚性凸模(或弹性体、液体)的作用对板料进行软模成形的工艺，并阐述了新工艺的优点。
Solid granules medium forming technology is an advanced soft-tool forming technology which USES solid granules medium instead of rigid punch (or elastomer, liquid) to form sheet.
胞壁弯曲和胞壁缺省对多胞固体产生极大影响，多胞材料的体积模量、剪切模量和弹性模量随胞壁弯曲程度、胞壁缺省的增加显著下降。
The results show that the bulk modulus, shear modulus and elastic modulus decrease remarkably with the increasing degree of wavy and the missing of cell wall.
固体火箭推进剂是一种粘弹性高聚物，同时又是颗粒基复合材料。其断裂实验难度较大。
Solid rocket propellant is a kind of high filled granular composite with viscoelastic behavior so that the experimental researches on its fracture are very difficult.
并运用三维线性粘弹性有限元模型，对离心实验过程进行了数值模拟，以确定固体推进剂药柱在轴向过载作用下的变形问题。
Using three dimensional linear viscoelasticity finite element model, numerical simulation was performed. The deformation of solid propellant grain under axial acceleration was investigated.
研究倾斜荷载作用在黏性流体与热弹性微极蜂窝结构固体界面上时，荷载倾斜角的影响。
The effect of Angle of inclination at the interface of a viscous fluid and thermoelastic micropolar honeycomb solid due to inclined load is investigated.
基于不可压和近似不可压粘弹性有限元法，对固体火箭发动机药柱进行了三维分析。
Three-dimension analysis of solid rocket motor grain was presented based on incompressible and nearly incompressible viscoelastic finite element method.
据此，在标准线性固体模型的基础上，考虑损伤内变量的演化，建立了应变率相关的水泥砂浆的非线性黏弹性损伤模型。
Thus, a nonlinear viscoelastic constitutive relation for cement mortar based on standard linear solid model considering the evolution of the damage internal variable is established accordingly.
采用MDI、PAPI、HDI、IPDI等不同的异氰酸酯和聚酯多元醇、聚醚多元醇等反应，制备高固体分的聚氨酯弹性体预聚物。
A high solid elastic polyurethane prepolymer has been prepared based on MDI, PAPI, HDI, IPDI and polyester polyols and polyether polyols.
采用MDI、PAPI、HDI、IPDI等不同的异氰酸酯和聚酯多元醇、聚醚多元醇等反应，制备高固体分的聚氨酯弹性体预聚物。
A high solid elastic polyurethane prepolymer has been prepared based on MDI, PAPI, HDI, IPDI and polyester polyols and polyether polyols.
应用推荐