该法可以对在弯矩、剪力和轴力共同作用下的钢筋混凝土梁截面进行较为准确的荷载-变形反应全过程分析。
This method can be used to analyze accurately the complete load-deformation response of RC beams loaded in combined shear, moment, and axial load.
本文在总结前人工作的基础上,对结合梁斜拉桥中在轴力和弯矩共同作用下的钢—混凝土组合梁截面受力状态和混凝土桥面板有效宽度进行研究。
This paper deals with the mechanical behaviors of steel-concrete composite beam and effective width of concrete slab on the axial force and the bending moment together function, based on the past job.
本文对在应用应变式扭矩传感器时由于在弹性轴上的弯矩而引起的误差进行了力学分析,并提出了消除的方法。
This paper analyzes the error of torque sensor of strain-resistor which derives from the influences of bending moment on elastic axis, and discusses the Eliminating techniques.
分析了在地基承载力验算中,弯矩M与轴力N之间相关性的存在,以及相关性对可靠度计算的影响。
This paper analyses the relativity between bending moment (M) and axial force (N) in calculating ground supporting capacity, and the effect of relativity on reliability calculation.
计算了结构与运动刚体之间的冲击力时程曲线、梁中的剪力及弯矩分布、轴力杆件中的轴力分布。
The impact force-time history between the structure and the moving rigid-body, shear force and bending moment distribution along the beams, axial force distribution along the bars were calculated.
将弯矩与轴力分开处理,然后将两者算出的应力叠加,得到综合应力。
The combined stress induced by moment and thrust can be added to get the combined stress effect.
另一方面,随轴压比增大,梁柱上弯矩分配虽略有变化,但对整榀框架的极限承载能力和总的弯矩调幅能力影响不大。
On the other hand, though increasing axial compression ratio of column changes the moment redistribution in frame, the effect on ultimate loads and total modulations is insignificant.
摩托车液压盘式制动器径向尺寸较小,制动时沿制动盘的轴向施力,制动轴不受弯矩,制动性能稳定,应用较广。
Motorcycle disk brake is widely used because of its small radial dimensions, axial application of force along the disk when braking, no bending moment on brake shaft and braking stability.
这种方法主要用来计算地震时衬砌结构中的轴力、剪力和弯矩。
The proposed method, with above factors concerned, is mainly applied to evaluate stresses including moment, axial and hoop forces in lining.
空腹屋架下弦处于预压力、强大的轴拉力、弯矩和剪力共同作用下工作。
The lower chord of a vierendeel truss, when loaded, is subjected to the combined action of prestressed compression, large axial tension, moment and shear.
因此弯矩在形心处要引起正应力,从而引出所谓“等效轴力”的概念。
Therefore, the bending moment may cause normal stress at the axis of gravity, and the concept of "equivalent axial force" is induced.
轴,支承转动零件并与之一起回转以传递运动、扭矩或弯矩的机械零件。
The axis, the supporting rotation components and rotates together with it transmits the movement, the torque or the bending moment machine parts.
工程设计中,通常认为普通螺栓群弯矩受拉时,中和轴在弯矩指向一侧最外排螺栓处。
In engineering design, the natural axis is located assumably the extreme row which is directed by the moment.
增大支撑预加轴力可以有效的控制连续墙的变形,减小墙身负弯矩。
Increasing brace pre axial force can effectively control the wall displacement and reduce negative bending moment.
根据壳体理论对钢支撑受力机理进行分析和简化计算,得出钢支撑在轴力和弯矩共同作用下,轴向正应力呈线性分布。
On the basis of theory analysis, it is deduced that the axial stress is linear distribution, when the steel support is loaded by axial force and moment.
本文用极限平衡法求解了钢管混凝土格构柱在轴力和弯矩共同作用下的极限承载能力。
This paper describes the limit analysis of latticed columns made from concrete-filled steel tubes under combined bending and axial loading.
介绍了一种特殊的传动轴支撑结构型式,它的优点在于避免轴既要传递转矩,又要承担弯矩。
A special support style of drive shaft is described, which prevents the shaft from transferring rotary moment and being subject to bending moment at the same time.
国家游泳中心“水立方”结构中采用了连接方钢管、且承受轴力与弯矩共同作用的焊接空心球节点。
Welded hollow spherical joints connected with square hollow sections are adopted in the National Swimming Center "Water Cube", which are subjected to combined axial forces and bending moments.
借助与桁架对应的梁的剪力图和弯矩图根据两个关系式可直接求出一般平面平行弦桁架任一根杆件的轴力。
For a complanate parallel chords truss, the axial forces of a member can be solved by the shear-diagram and two simple expressions.
提出接轴平衡力应该采用欠平衡,平衡系数取0.89,这样既可以降低接轴承受的弯矩,又可以降低接轴虎口铜滑块的载荷。
The lower balance force with balance factor 0.89 is adapted to reduce bending of universal coupling shaft and load of copper slider.
“盆式”沉降使上部框架梁主要受剪力和弯矩作用,框架柱主要受轴力和弯矩作用。
The beams are principally suffered with moment and shear force and the columns principally suffered with moment and axial force under basin-shaped settlement.
本文分析了承受轴力、弯矩及剪力的型钢构件极限承载力和钢筋砼框架短柱受剪承载力。
This paper analyzes the ultimate strength of steel sections subjected to axial loading, bending and shear as well as shear strength of reinforced concrete short columns in frames.
由于曲率的影响,曲线梁在其曲率平面内弯曲时的中性轴不通过横截面的形心。因此弯矩在形心处要引起正应力,从而引出所谓“等效轴力”的概念。
When a curved beam is bending in the plane of the curvature, the neutral axis of cross section is not identical with the axis of gravity due to the influence of the initial curvature.
所采用的广义屈服函数中考虑了轴力、弯矩、剪力、扭矩的交互作用。
Interactions among Oxial force, fending moment and shearing force are considered in the generalized yield function.
对工程中分析弧形齿联接轴及其相应轴段所受弯矩的影响具有重要参考价值。
It is very useful to analysis the affection of crown gear coupling and correspond axis by addition moment of bending in engineering.
在空间结构中,碗式节点往往在不同比例的轴力和弯矩共同作用下工作。
In space structure, the socket joint systems can be subjected to different ratios of axial force and bending moment.
首次建立了双连拱隧道二次衬砌内力(轴力和弯矩)模型及围岩的稳定与变形的规律。
The model of internal force for the secondary lining and the laws of the deformation and the stability for the surrounding rock have been set up firstly in the double-arch tunnel.
首次建立了双连拱隧道二次衬砌内力(轴力和弯矩)模型及围岩的稳定与变形的规律。
The model of internal force for the secondary lining and the laws of the deformation and the stability for the surrounding rock have been set up firstly in the double-arch tunnel.
应用推荐