提出了纯弯曲梁的蠕变脆断损伤失效分析方法。
This paper is concerned with the evolution equations of creep damage beams under pure bending.
该类型的称重传感器是正提交基本上是类似的弯曲梁式。
The type of load cell that is being presented is basically similar to a bending beam type.
同时，应用该回弹势能原理于纯弯曲梁的回弹变形计算。
Meanwhile, the springback potential energy principle is applied to calculate the springback deformation of a pure bending of curved beam.
弯曲梁的随机材料参数和随机几何参数可结合为一个随机参数——弯曲刚度。
The stochastic material parameter of bending beam can be integrated with its stochastic geometrical parameter into one stochastic parameter.
根据纵横弯曲梁理论公式，用计算机求解性能参数进行扶正器组合设计，是简便可靠的新方法。
According to the theory equation of bend beam, using the computer to solve the performance parameters in the design of centralizer assembly is a new, simple and reliable method.
考虑残余应力对压痕弯曲梁应力场强度的贡献后，对相应的K _ (IC)表达式进行了修正。
An improved K_ (IC) formula for indented bending beam method is proposed by considering the contribution from residual stress to the total stress intensity at the indentation flaw.
OBBA系列单端弯曲梁式称重传感器是专为拉伸或压缩装载应用而设计，包括漏斗称重或输送称重。
The OBBA series single ended bending beam load cell is designed for tension or compression loading applications including hopper scale and conveyor weighing.
这种方法根据微积分关系，确定曲线的始点、形状和末点，即可直接得到不同外力作用下平面弯曲梁的内力图，简捷且易掌握。
According to the calculus relation, the internal force chart can be gained by confirming the begin points, figure shape, ending points. This method is simple and easy to be grasped.
发动机驱动着机器人的尾巴和连接它上身那弯曲的像梁一样的固定装置。
The motor that drives the robot's tail and a curved, girder-like stabilizer bar attach to the robot's upper body.
而另一方面，缅因大学的拱梁可以在现场构建——纤维布套充气、弯曲成简单形状，用真空泵灌注树脂。
The University of Maine arches, on the other hand, can be fabricated on site — the fabric inflated, bent around a simple form and infused with resin using a vacuum pump.
这种方法是适用于由刚性结构体系(强柱和梁)转变成框架、弯曲的元素。
This approach was applied by transformation of the rigid structural system (strong columns and beams) into framing, curved elements.
进行了纵筋加强箱形薄壁梁模型的循环弯曲试验。
Cyclic bending tests of a box girder with longitudinal stiffeners were also carried out.
给出了循环弯曲载荷下船体梁极限强度的简化分析方法。
A simplified analysis method for the ultimate strength of ship's hull girder under cyclic bending was proposed.
当棱柱形梁受纯弯曲时，这些公式给出了它的主力和主变。
These formulae give us the stress and strain in a prismatic beam when it is subjected to pure bending .
本文从非棱柱形梁的弯曲理论出发，推导出了变截面刚架元的单元刚度矩阵和等效结点载荷。
Based on the theory of the bending of non-prismatic beam, the paper has derived a rigidity matrix and the equivalent node load of the rigid-frame element with variable sections.
梁弯曲成半径为r的园形形状。
在一组长，内装公斤块石的铅丝笼横梁上部，加上公斤的荷重，在外荷作用下，梁的中部虽然发生弯曲变形，但铅丝笼梁却始终未断裂破坏。
In a leader, installed in the upper crossbeam gabion stone kg, plus kg load under the action of external load, while the central beam bending deformation, but the wire cage has not broken beam.
根据递增塑性破坏的强度准则，详细讨论了循环弯曲载荷下船体梁的非弹性变形性能。
Based on the strength criterion of the incremental plastic collapse, the inelastic deformation behavior of a ship's hull girder under cyclic bending loads was discussed in detail in this paper.
该梁具有常数弯曲刚度。
借助控制微分方程的标准基本解答组，获得梁弯曲问题初参数形式的通解。
Using the normal solutions of the governing differential equation, the general solution of a bending beam is obtained.
提出了考虑剪切变形时变截面梁弯曲和稳定计算的传递矩阵法。
The transfer matrix method for the bending and stability of the variable section beams with shear deformation is presented.
梁，挠度，弯曲，应力计算器。
通过给出橡胶梁弯曲变形的数值算例，说明再生核粒子方法在解决大变形等工程问题上有着精度高，自适应能力强等特点。
Finally, a numerical instance of rubber beam bending deformation is given to demonstrate that the method is highly accurate and self-adaptive in solving large deformation engineering problems.
提出一种考虑剪切变形影响时，求解梁的弯曲变形和横向自由振动的奇异函数解法。
An approach using singular functions is propsed to solve the bending deformation and the transverse free vibration problems of beams in consideration of shearing.
实测资料表明，上下行并行的钢板梁桥在采用“两桥连接”加固以后，平联杆件的弯曲变形和断裂现象急剧增多。
Measured results indicate that the bend deformation and abruption phenomenon appears very quickly when the "two-bridge-junction" method is adopted in the parallel steel plate beam.
在对梁的弯曲进行研究时，经常要用到弯矩方程。
The equation of camber is often used when the bend of girder is being studied.
通过一端固定另一端施加横向作用力驱使原子运动，得到纳米单晶铜悬臂梁弯曲的变形图。
The atomic movement of the cantilever beam was motivated by transverse force on one end while another end was fixed, through which its bending deformation image was obtained.
根据复合材料力学，建立了弯曲条件下复合梁的分析模型，并导出了相应的应变响应关系。
On Basis of composite mechanics, an analytical model of composite beam under bending is established and the corresponding deformation response is formulated.
首次采用梁的弯曲理论和能量法结合的方法推导了弯曲力和行程的理论解析公式。
It firstly derivates theoretical analysis formula of force and stroke by using beam bending theory and energy method.
首次采用梁的弯曲理论和能量法结合的方法推导了弯曲力和行程的理论解析公式。
It firstly derivates theoretical analysis formula of force and stroke by using beam bending theory and energy method.
应用推荐