介绍离合器从动盘总成中的一种典型波形片零件的冲压工艺及弯曲成形模设计。
The stamping technique and design of bending former for a typical waveform piece in clutch driven plate assembly were introduced.
分析了冷凝器固定板的工艺性，介绍了该零件弯曲成形模的结构特点和工作过程。
The technological property of the fixing plate of the condenser was analyzed. The structure characteristics and working process of the bending die for forming the part were introduced.
通过对消音器后环箍弯曲成形模的设计，介绍了考虑弹复补偿后，较大圆筒件成形模具的设计分析和模具结构。
Through the design of bending die for the back hoop of silencer, die design analysis and die structure for large cylinder part considering springback compensation was introduced.
介绍了通风槽管的成形工艺，设计了浮动悬臂式弯曲成形模结构，介绍了其模具工作过程，分析了模具设计要。
The structure of the floating cantilevered bending forming die was designed, the working process of the die was introduced and the main designing points were analyzed.
对三角形底盘筒形件的成形工艺进行了分析，决定采用弯曲、拉深、胀形复合模等进行复合成形。
As the shape technology of triangle chassis canister is analyzed, then the processes of bending, stretching and bulging compound mould are adopted to reunite the shape.
薄壁管数控弯曲中带芯头的柔性芯模是提高薄壁管件成形极限和成形精度的关键因素。
The mandrel(including flexible balls) is the key to improving the forming limit and forming precision in thin-walled tube NC bending process.
介绍一种卷圆工艺和模具，并对模具弯曲成形过程进行了分析，指出该方法可以用于级进模上成形。
It has been recommended a technology and die of bending ring with analysis of its forming process, using in that of bending ring in progressive forming die.
采用有限元多晶体模型对无模多点成形条件下不同加载方式的板条多点弯曲成形过程进行了数值模拟。
Numerical simulation of multi point bending process of strip under different loading paths is dealt with the finite element polycrystal model.
针对该冲压件弯曲成形难的问题，设计了双凸模弯曲模，通过双凸模的依次动作可一次成形该零件的复杂形状。
Aimed at the difficulties in the bending forming of punching parts, the bending die with dual-punch is designed, the complex shape of this part is once formed by the ordinal action of dual-punch.
该弯曲模采用浮动模块和复合运动的滑板，使环形零件在压力机一次行程中成形，工作效率高。
The vertically float die block and slide plate of combination movement have been adopted in the die to form a ring part on a single stroke of the press with high productivity.
介绍了汽车玻璃落模弯曲成形中回弹的机制，建立了有限元模型。
The spring-back mechanism in the drop bend-forming of automotive glass is introduced, and the finite element model is established.
分析了凹模摆块机构的几何运动，设计了相应的弯曲模结构，可为类似零件的成形提供参考。
The geometrical movement of the swaying block of the matrix is analyzed. The corresponding die structure has been designed. It can serve as a reference for forming similar parts.
运用有限元方法分析了模切板刀片的复合弯曲成形，对成形过程中的回弹进行了研究。
The finite element analysis of the compound bending forming process is done for knives of the template. The spring back in the forming procedure is investigated.
在弯曲模设计中，常用斜楔滑块、杠杆、齿轮齿条等机构来挟迫模具工作零件的运动方向，实现工件的弯曲成形。
In the design of bending die, moving direction of working parts of die is forced by the mechanisms, such as wedge-slide, lever, rack gearing etc, so as to realize bending forming.
介绍了双向弯曲(翻边)成形模的结构及工作过程，指出了模具设计、制造时应注意的事项。
The structure and working principle of a bi_directional bending die were introduced. And the points for attention in design and manufacture of the die were listed.
该模具较好地解决了小尺寸、较复杂弯曲零件用级进模成形的问题，为类似零件的成形探索了一条行之有效的途径。
The progressive die well overcame the difficulties of forming small_sized parts with complicate curving shapes with progressive dies. It explored an effective way for the forming of similar parts.
叙述了玻璃托的零件结构及成形工艺，介绍了落料压凸模、一次弯曲模和二次弯曲模的模具结构及设计要点。
The structure and stamping technology of glass bracket were elaborated. At the same time, the blanking die, bending die for one time and bending die for two times were also introduced.
采用焊管作为管坯 ，焊管弯曲采用专用模具热弯 ，焊接采用等离子弧焊。超塑成形采用多层模结构 ，用模具来控制波形。
Welded pipe that bended by hot bending method with a set of specific die and welded by plasma arc welding method was used as tubular blank of SPF.
采用焊管作为管坯 ，焊管弯曲采用专用模具热弯 ，焊接采用等离子弧焊。超塑成形采用多层模结构 ，用模具来控制波形。
Welded pipe that bended by hot bending method with a set of specific die and welded by plasma arc welding method was used as tubular blank of SPF.
应用推荐