丝管是通过将蜡模浸入水化的丝蛋白溶液中制成的，有许多组织工程应用，如血管移植和神经导引。
Silk tubes, made by dipping a wax mold in aqueous silk solution, have a number of tissue engineering applications like blood vessel grafts and nerve guides.
在这个屏幕快照中，有一个针对分模线的附件(工程师将在这个附件就绪时填充它)和一个针对这个更改请求的项目计划的附件。
In the screenshot there is an attachment for the die line (the engineer will populate this attachment when it is ready) and an attachment for the project plan for this change request.
制造工程师和制作部经理则分别在<模胚订购清单>和<大肉钢材订购单>审核、批准；
Manufacturing engineer and manager review and approve Mould Block Purchasing Order and Big Tessera Steel Purchasing Order.
结合某岛礁防波堤护底施工实例，介绍了模袋混凝土技术的施工方法与注意事项，为类似的工程提供参考和借鉴。
This paper takes the works of breakwater apron as an example to introduce the construction technique of bagged concrete and relate the important matters, which will help us with relevant works.
简要介绍采用石墨模铸型制造铁路用车轮的新型铸钢车轮生产工艺，及工程设计中的技术。
The paper briefly introduces the fabrication technology of casting wheel for railway vehicles, and describes the project design.
本文对于非均质岩体工程的变弹模光弹性实验计算有着一定的参考意义。
It has some reference meaning for the Photoelastic experiment and Calculation of Changeable elastic modulus in the inhomogeneous rock masses engineering.
从而提高了配模效率和配模质量，规范和优化了模板工程设计。
The efficiency and quality of formwork design are improved and optimized.
本文提出用砖模代替木模的方法用于沉井工程中刃脚部分的施工的理论。
This paper brings forward a new construction method that brick model has been used to replace wood model in blade feet part sinking well engineering.
结合压铸机合模机构的优化设计，表明此算法可有效解决工程问题的优化。
Finally, through the locking mechanism's optimization of die-casting machine, the result shows that the algorithm could effectively resolve the optimization of engineering problems.
本文首先采用基于逆向工程的特征和约束的方法来构建脚模曲面，建立脚模特征参数模型。
Firstly, based on feature and restriction in the Reverse Engineering, construct all-purpose surface of feet and found parameterized model.
简述了建筑工程施工现场砼工程质量检查的体会，强调了施工前检查、施工过程按规定控制及拆模时跟踪检查的重要性。
This paper states the experience of quality check of concrete engineering of architecture construction site and the importance of construction check, control and tracking check.
介绍了模袋混凝土在水下护坡工程中的施工方法及质量控制。
This paper introduces the construction method and quality control of bag concrete in under water prevention slope project.
本文设计的是汽车发动机罩外板冲压模具第一工程所使用的拉延模。
This is the engine cover design, board stamping dies used in pulling one engineering service modules.
结合潘二矿储煤仓工程实例，详细介绍了筒仓滑模施工技术。
Combining engineering example with coal storage bunker, introduced slide form construction technology in detail.
在此基础上，通过全面的分析和详细的工程计算，设计了消失模铸造尾气净化装置。
Based on overall analysis and delicate engineering calculation, an exhaust gas purge device for EPC casting was designed.
火灾模化研究是现代火灾安全工程学研究的基础性方法。
The fire modeling study is currently a fundamental methodology in modern fire safety engineering.
介绍翻模施工基本结构、关键技术研究，并结合工程实例介绍其应用效果和适用条件。
It is an introduction about the basic structure of the turnover formwork construction and the research on the key technology.
阐述了波形弹簧成形模曲面的确定及其数控加工程序的编制方法、加工工艺过程。
The paper expounds the method of design about wave spring curved surface, the processing NC program and its technological processing course.
黄壁庄水库副坝防渗心墙加固工程所需高性能混凝土，要求和易性好、早期强度低、后期强度高、抗渗性能好、低弹模和高抗拉强度。
The high performance concrete for core wall of earth dam must be good workability, low early strength, high final strength, high seepage resistance, low elasticity modulus and high tensile strength.
在仔细分析了建筑模网装配过程的基础上，对模网装配机进行系统工程的设计分析。
Based on the assembling process analysis, the system engineering analysis to the construction formwork assembling machine was applied.
基于工程设计CAD专家系统特点，建立了ADDES专家系统（飞机压延模CAD专家系统）。
The features of engineering CAD expert system are discussed, and an ADDES system(Aircraft Drawing-Die design CAD Expert System) is built.
结合辽河石佛寺水库枢纽工程，阐述了液压滑模机在混凝土工程施工中的应用。
The application of hydraulic pressure slip model in reservior pier concrete construction is discussed through Liaohe Shifesi hinge reservoir project.
文章对线路维护工程中的光缆线路障碍查找、光纤衰减均匀性、光纤接续和偏振模色散（PMD）等问题进行了分析。
This paper discussed the trouble shooting, attenuation uniformity of optical fiber, optical fiber splicing and PMD problem in the maintenance of optical fiber line.
文章以某工程为例，介绍了滑模的施工方法及质量控制要点。
Taking an engineering as the example, this paper introduces Slipform construction method and the main points of its quality control.
无井架液压滑模施工工艺在烟囱工程中已被广泛应用。
The construction process of hydraulic slide model without derrick are widely used in the chimney construction.
在工期要求非常紧的情况下，该工程采用了滑模施工。
In constructing certain project, the time limit was short, so that the slip form techniques were adopted.
振动沉模防渗板墙技术是近几年引入水利工程中进行地基防渗加固的一种新技术。
In recent years, the vibration sinking mould cutoff panel wall is introduced to the hydro project, which is the new technology to strengthen the foundation anti-seepage.
通过介绍模因理论，分析模因现象，并结合微格教学的特点，旨在揭示在英语微格教学中建立模因工程的必要性。
Through introducing memetics, analyzing meme phenomenon and combining the characteristics of microteaching, aims to expound the necessity of constructing meme project in microteaching.
本文还结合PIC模拟计算，比较详细地分析了工程上抑制放大器中杂模振荡的方法，对实际工程应用具有一定的参考意义。
The detailed analysis of the methods to prevent spurious oscillations in an amplifier for some actual applications is finished by combining PIC simulations consideration.
公司生产车间下设模具部、压铸部、后机加工表面处理部等，拥有专业模具设计工程师、开模高级技师、压铸调机师共十余人。
We have some departments, including design department, die casting department, processing department and so on. The engineer and technician all have professional workmanship.
应用推荐