因而，这种测量方法可用于测量工件表面粗糙度参数仪器的设计。
There- fore, this measuring method may be in use for the design of the new measuring instrument which used to measure the surface roughness parameters.
结合实际生产情况，设计了与工件表面粗糙度有关的因素水平表。
The factors and levels graph related to surface roughness of the parts was designed combining practical manufacturing in this paper.
根据对试验结果的分析得出高速铣削淬硬钢工件表面粗糙度的变化规律。
The change rule of surface roughness of the milled workpiece is obtained by analyzing the experimental data.
通过实验，对砂轮平衡精度与磨削加工工件表面粗糙度之间关系作了深入的研究。
This article researched the relationship between balance precision of the grinding wheel and the ground surface roughness.
通过在线监测磨削拳数。所提供的预测方法可以实现对工件表面粗糙度的在线预测。
By monitoring the grinding parameters, this proposed method can realize on-line prediction for the workpiece roughness.
树脂结合剂砂轮自锐性好，不易堵塞，磨削效率高，温度低，工件表面粗糙度较低。
Resin bond grinding wheels have characteristics of good self-sharpening, high grinding efficiency, low grinding heat and no loading. The processed workpiece has.
探讨橡胶接触轮硬度、每次进给的磨削深度、磨削力和砂带磨损对工件表面粗糙度的影响。
The hardness of the rubber contact wheel, the grinding depth of the workpiece per feed once.
树脂结合剂金刚石砂轮自锐性好，不易堵塞，磨削效率高，温度低，工件表面粗糙度较低。
Resin bond grinding wheels have characteristics of good self-sharpening, high grinding efficiency, low grinding heat and no loading. The processed workpiece h.
通过对电火花加工后工件表面粗糙度的测量，分析了各种电加工参数对表面粗糙度的影响。
With the measured surface roughness of workpiece, the paper analyzes the influences factors for the roughness with details.
高速超高速磨削是提高磨削效率、降低工件表面粗糙度和提高零件加工质量的先进加工技术。
High speed grinding and ultrahigh speed grinding is an advanced processing technique which can raise grinding efficiency, reduce work surface roughness and promote machining quality of the parts.
介绍了电解抛光技术的研究现状﹑特点及抛光原理，分析了工件表面粗糙度的主要影响因素。
The current status, characteristic and polishing principle of electropolishing technology were introduced. The main factors affecting workpiece's surface roughness are analyzed.
超高速磨削可提高磨削效率、提高零件加工精度和工件表面粗糙度，是一项具有广阔应用前景的技术。
The promising super speed grinding technology can enhance grinding efficiency, improve surface quality of work piece and reduce its surface roughness.
以此为基础，在国产CD 6140a型车床上对C3602铅黄铜进行了正交切削试验，分析了各因素水平对工件表面粗糙度的影响。
On this basis, the orthogonal test of leaded brass C3602 was made on the domestic lathe CD6140A and the influence of various factors and levels on surface roughness was analyzed.
大多数计算磨削表面粗糙度的理论公式都是基于砂轮表面磨粒与工件表面的几何创成机理建立的。
Most of the theoretic formulas to calculate the ground surface roughness are based on the geometrically generating interaction between grits and workpiece surface.
在机械制造中，机械零件表面粗糙度对工件的性能有很重要的影响。
In manufacturing, the surface roughness is a very important influence to mechanical properties of workpiece.
采用平行铣削对曲面进行数控加工时，行距对工件的表面粗糙度有一定的影响。
The parallel milling is adopted to curved surface NC machining. The row spacing has an effect on surface roughness of workpiece.
铣削加工表面粗糙度的形成与铣刀和工件振动、主轴偏心、刀具磨损、刀具变形等物理和几何因素有关。
The surface roughness in mill machining relates to quiver of work piece, principal axis's eccentricity, cutter abrasion, cutter distortion and other physical or geometry factors.
也就是说粗研时增大研磨压力可减小工件已加工表面粗糙度值。
It means that in rough lapping the value of machined surface roughness can be reduced with lapping pressure increasing.
实验表明，在适当的加上条件下，砂带振动磨削不仅可以降低工件的表面粗糙度，而且可以提高工件的形状精度。
It is proved by experiments that under appropriate machining conditions, abrasive belt vibration grinding can not only reduce workpiece surface roughness but also improve work-piece form accuracy.
通过玻璃纤维增强塑料的车削试验，研究了薄膜与基体之间的附着强度、涂层刀具的磨损和加工工件的表面粗糙度。
The adhesive strength of the films to the substrates, diamond-coated tool wear and surface roughness of the workpiece were further studied by turning glass fiber reinforced plastic cylindrical bars.
结果表明：工件进给速度对表面粗糙度的影响最大，切削深度和刀具前角次之，工件硬度影响最小。
The results show that the effects on surface roughness are feed speed, depth of cutting , tool rake angle and parts hardness in turn.
表面粗糙度是反映零件表面微观几何形状的一个重要指标，对工件表面质量有很大影响。
The surface roughness is an important target of reflecting the microscopic shape of components surface, it has great influence on the surface quantity of work piece.
文章分析了超声振动车削时工件的装夹偏心和车床主轴的旋转精度对加工表面粗糙度的影响。
This paper analyses the influence of the eccentric clamp of the workpiece and the rotative accuracy of the lathe spindle on the ultrasonic lathe.
本文通过实验研究了在固着磨料高速研磨中，研磨压力对工件已加工表面粗糙度的影响。
Through experiments of high speed lapping with solid abrasives, the effect of lapping pressure on machined surface roughness is studied in this paper.
同时还得到了电解参数对工件尺寸精度和表面粗糙度值的影响规律。
Meanwhile, it finds out electroanalysis parameters influencing workpiece size precision and surface roughness.
对一个实际工件进行测量提取表面中线和粗糙度，结果令人满意。
A real complicated engineering surface was used to verify its properties in extraction of mean line and roughness and satisfactory results were obtained.
砂带磨削中，表面粗糙度是被磨工件表面质量的一个重要的技术指标。
Workpiece surface roughness is an important technical index in evaluating the ground quality of belt grinding.
砂带磨削中，表面粗糙度是被磨工件表面质量的一个重要的技术指标。
Workpiece surface roughness is an important technical index in evaluating the ground quality of belt grinding.
应用推荐