它由工业控制计算机、信号采集板卡等组成。
It is composed of the industrial control computer and the signal collection boards.
本文所研究的是嵌入式工业控制计算机的设计与应用。
This paper illustrates the design and application of embedded industrial control computer.
采用工业控制计算机测试转速、温度、供油压力等参数。
In the test, the speed of revolution, temperature, oil supply pressure and other parameter are measured by the Industry Control Computer.
本文提出了基于工业控制计算机的医药胶塞全自动清洗系统。
This paper present the automatic cleaning control system for medical stoppers based with industrial computer.
本文提出了基于工业控制计算机的医药胶塞全自动清洗系统。
This paper presents the automatic cleaning control system for medical stoppers based with industrial computer.
介绍一种利用工业控制计算机实现水泥配料的自动控制系统。
An automatic control system of cement ingredient based on Industrial control Computer is introduced in this paper.
文章介绍了以工业控制计算机为核心的数据采集系统的硬件组成。
This paper mainly introduces the hardware part of data acquisition system using industrial computer as control centre.
介绍了一种以工业控制计算机为核心的曲轴不平衡信号检测系统。
A measurement system for unbalance signals of crankshafts, which is mainly based on an industrial control computer, is introduced.
控制核心设备采用上、下两级研祥工业控制计算机，三菱plc。
The main facilities of the control system include the higher level and lower level Yanxiang industrial computers and Mitsubishi PLC.
该方法也可应用于其他智能仪表及工业控制计算机等系统的设计中。
The method can be used in the system of intelligent-instrument and industrial control computer.
工业控制计算机进行空间轨迹规划计算而DMC实现关节运动的控制。
The computation of spatial trajectory planning was carried out by industrial computer, while joints motion control was performed by DMC.
采用双机系统的工业控制计算机是冗余技术的一种，称为双模冗余系统。
The industry control computer adopting dual-computer system is one kind of the redundancy techniques and is called dual-mode redundant system.
采用工业控制计算机将模糊控制策略应用于焊接变位机的实时控制研究。
This paper adopts the industrial control computer as the controler, and apply the fuzzy control tactics to the research on real time coned of welding position-changer.
系统中采用的硬件主要有：工业控制计算机，信号采集设备和信号输出设备。
The hardware adopted in the system include Industrial PC, signal input devices and signal output devices.
介绍了一种单片微机、工业控制计算机进行数据和波形管理的冲击电流发生器。
A current impulse generator is introduced with the data and waveshape controlled by computer on slice and process controller.
系统由一台工业控制计算机和检测仪表(最多200块)构成，全年连续工作。
The system is composed of an industrial control computer and detect instrumentations (Maximum is 200), working continuously all the year.
本文介绍了虚拟仪器的概念和特点，采用工业控制计算机实现了虚拟仪器的设计。
This papers introduces the conception and distinction of virtue instrument, to realize the designs of virtual instrument with industrial computer.
由工业控制计算机实现的浸没熔炼过程控制系统能有效地控制炉内的氧化还原性气氛。
The control system for the sirosmelt furnace process which implemented by industrial control computer can control the atmosphere of oxidizing-reducing process in the furnace effectively.
该方法基本可由通用部件实现，包括一台工业控制计算机，一块计数板和若干A／D板。
This method can be realized with ordinary parts and boards, including an industrial IPC, several A/D boards and a counter board.
工业控制计算机的普遍应用，将许多传统机械设备的控制技术提高到了一个崭新的阶段。
The general application of industrial control unit advances many control technologies for traditional mechanical equipment to a new stage.
介绍了以工业控制计算机为核心的电能质量分析仪，阐述了仪器的工作原理和设计要点。
In this paper the development of power line harmonic analyzer based on ind us-trial PC is introduced, and the working principle and design method are given.
说明了工业控制计算机上实现专机专用的必要性，介绍实现原理并给出了相关的实现代码。
This paper introduces the necessity and the principle of special computer for special use, and gives the related effective code.
提出了一种由工业控制计算机、CCD摄像机和系统控制机构组成的等离子熔积焊缝检测系统。
A plasma welding detecting system is presented, which involves with controlling computer, CCD camera and control system execution parts.
本文介绍一个基于工业控制计算机和PLC的筛焦过程控制系统，由网络操作站和控制站组成。
This paper presents a control system for the coke riddling process based on an industrial control computer and a PLC. It consists of a network operation station and a control station.
在相关的运动部件上安装测角传感器(或传感器组件)，测量运动参数并反馈给工业控制计算机。
Installs on the related movement part takes a bearing the sensor (or sensor module), the survey parameter of movement and the feedback gives the industry control computer.
计算机特别是工业控制计算机应用能力的强弱是衡量控制类专业毕业生素质高低的重要尺度之一。
The application ability on computer, especially on industry control computer is one of the important measures on weighing the quality of the graduates of control specialty.
许多小型监控系统以工业控制计算机为核心，并且越来越多地采用组态方式的开发监控管理软件。
Industrial control computers are the core of many small monitoring and control systems. More and more monitoring and control systems are designed by configuration software.
介绍了工业控制计算机、接口控制箱、测试适配器组成的航空陀螺综合测试系统的硬件和软件结构。
The structure of the hardware and software of an aviation gyroscopic test system combined by industrial control computer, interface controller and test adapter is introduced.
介绍了由工业控制计算机和现场单片机采样控制器组成的干式有载调压变压器集中监控系统的设计。
The integrated monitoring and controlling system is introduced, which is composed of industrial control computer and field monolithic data sampling controller.
传统的工业控制计算机或单片机虽然具有良好的工业控制功能，但不具有很好的数字信号处理能力。
An industrial control system based on industrial control computer and digital signal processor is introduced in this paper.
应用推荐