Codezero还专门针对嵌入式系统设计，支持多核处理器和基于ARM的设计。
Codezero was also designed specifically for embedded systems and supports multicore processors as well as ARM-based designs.
在设计实时嵌入式系统时，如果能够善于利用可变电压处理器，可以极大减少系统的能耗。
Variable voltage processors, if used properly in designing real-time embedded systems, can dramatically reduce system energy consumption.
本文针对这种情况设计了一种基于ARM 处理器的嵌入式以太网接口系统。
This paper is directed against this situation to design a kind of interface system that is ARM processor-based embedded Ethernet.
可编程片上系统(SOPC)是近期嵌入式系统设计的热点之一，利用成熟的处理器软核是进入这一领域的捷径。
SOPC design is one of hotspots in embedded system fields. Using a mature MCU soft core is a crosscut to enter this field.
在硬件设计中，本课题采用了基于ARM处理器组成的嵌入式系统平台。
In the section of the hardware design, the embedded platform consisted of ARM processor is used in this project.
研究了系统可靠性理论，分析了设计的嵌入式安全容错处理器的可靠性与安全性。
Based on the research of system reliability theory, the author analyzes the reliability and the safety of kernel processor design.
针对此问题，本文设计了一个以USB数码摄像头为图像采集设备、ARM为核心处理器的嵌入式机器视觉系统。
To solve the problem, a new embedded machine vision system is proposed, which takes the USB camera as the image acquisition unit and ARM as central processor.
为此，文章设计和实现了一种基于高性能的32位嵌入式处理器EP7312的远程自动抄表系统。
Thus, an auto meter reading system based on EP7312, a high performance 32bit embedded CPU, was designed and fulfilled.
雷达自动录取计算机系统的嵌入式设计，是建立在模块化的多处理器体系结构基础之上。
The embedded design for radar's automatic enrollment computer system is founded on the base of modular multiprocessor system structure.
介绍基于ARM内核的微处理器LPC 2210、以太网rtl 8019as芯片的性能，设计了一种基于二者的嵌入式系统以太网接口方案。
The microprocessor LPC2210 with the ARM kernel is introduced, and the Ethernet-controlled chip RTL8019AS, and the Ethernet interface of the embedded system are designed.
最后本文在理论分析的基础上设计了一个离线的汽车发动机故障诊断系统，并探讨了基于嵌入式处理器的在线故障诊断系统的实现方法。
This paper design a system to diagnose the fault of motor based on the research of theory and discuss the way to achieve the fault diagnosis online.
介绍了一种基于数字信号处理器(dsp)的嵌入式激光雷达图像采集系统的实现原理、硬件结构和软件设计。
An embedded image acquisition system of laser radar based on digital signal processor (DSP) is presented, whose theory of realization, hardware structure and software are also introduced.
分析了ARM微处理器在嵌入式远程测控系统网关中的应用，重点阐述了网关软、硬件的设计方法。
This paper analyzes the application of ARM microprocessor in a gateway of embedded remote measurement and control system, elaborates on the design method about software and hardware of this gateway.
本文在对嵌入式环境和嵌入式处理器深入分析的基础上，设计并初步实现了一个专用于嵌入式环境的操作系统。
Based on a deep survey of the embedded environment and embedded processors, the author designed and primarily implemented a new OS dedicated for embedded environment.
本文设计的USBHOST系统主要应用于嵌入式系统，以拓展微处理器的应用域。
The system of USB HOST in this paper is designed to the application of embedded system, broadening the field of microprocessor application.
本文设计了一种可便携使用的基于数字信号处理器(dsp)的嵌入式虹膜识别系统。
This paper designs a portable embedded iris recognition system based on digital signal processor (DSP).
本设计借助于嵌入式系统设计技术和微处理器技术来实现的低功耗、大容量存储的便携式数据采集装置。
A portable data acquisition device with low power consumption and mass storage is introduced by applying embedded system design and MPU techniques.
为此，结合嵌入式多媒体信号处理与系统控制特点而设计了32位可配置媒体增强RISC微处理器核RISC32（包括RISC3201和RISC3202）。
According to that, a 32bit configurable media-enhanced RISC microprocessor RISC32 (RISC3201 and RISC3202) is designed for media processing and system controlling.
本文研究设计了一种基于ARM 7tdmi (S3C 44b0x)处理器的嵌入式应用系统，并完成了系统的软硬件设计。
In this paper, an Embedded Application System based on ARM7TDMI (S3C44B0X) is proposed as well as designed.
以支持实时仿真的32位嵌入式arm7处理器LPC 2136为控制核心，设计开发嵌入式机器人控制系统硬件平台。
Hardware platform of embedded robot control system is developed using embedded 32-bit processor LPC2136 based on ARM7 that is the center control system, which supports real time simulation.
文章从微处理器设计者的角度出发，对在嵌入式系统当中应用广泛的32位ARM微处理器系列的体系结构作了研究和探讨，简要介绍了3种当前市场上流行的、典型的基于ARM的SOC芯片。
This thesis studies the architecture of the 32 bit ARM series microprocessor which is widely applied in embedded systems, and briefly introduces some typical SOC chips based on ARM core.
在硬件方面，本文设计了一个基于32位ARM微处理器LPC 2104的硬件实验平台，并结合嵌入式系统远程监控的需要，给出了硬件电路的整体设计原理和实现方法。
The 32-bit ARM embedded microprocessor, LPC2104, is selected as the core of hardware experiment circuit board, and the designing of hardware circuit is given.
本文提出并研究设计了一种基于ARM处理器s3c 2410x的嵌入式应用系统，完成了系统的整体设计，并实现了GPS系统的连接，获取到了GPS定位信息。
In this dissertation, an Embedded Application System Based on ARM S3C2410X is proposed as well as designed. It is connected with the GPS, and realizes the getting information of the position in GPS.
根据ARM处理器at91 RM 9200的工作原理和性能特点，提出了一种基于ARM嵌入式技术的车辆运行平稳性系统设计方案。
According to the ARM CPU AT91RM9200 principle of work and performance, this paper presents a set of design scheme on vehicle smoothness criterion measuring system based on ARM.
为满足工业现场温度、应力参数测量与监控的需要，设计了一种基于STM 32处理器的嵌入式温度、应力测量系统。
To meet the needs of temperature, stress parameter measurement and monitoring of the industrial field, an embeded temperature and stress measurement system based on STM32 processor is designed.
该系统设计以高性能嵌入式处理器和嵌入式实时操作系统为核心。
The system is designed with an embedded processor and a real-time operating system as the core.
文中首先对在嵌入式系统设计中广泛应用的ARM系列微处理器做了简要介绍；
This article briefly introduced ARM serial microprocessor, which is extensively used in embedded system design;
基于ARM微处理器的嵌入式系统已经得到了广泛应用，通过采用嵌入式系统的模块化设计方法，可以缩短研发周期和降低开发成本。
Embedded system based on ARM microprocessor has been widely used. By adopting the modularization design method of embedded system, it can shorten the development cycle and reduce development costs.
许多嵌入式系统的设计者表示，设计工具是一组处理器的决策过程的很大一部分(见嵌入式市场调查网络研讨会)。
Many an embedded system designer has indicated that the design tools are a large part of the processor decision making process (see the embedded Market Survey webinar).
许多嵌入式系统的设计者表示，设计工具是一组处理器的决策过程的很大一部分(见嵌入式市场调查网络研讨会)。
Many an embedded system designer has indicated that the design tools are a large part of the processor decision making process (see the embedded Market Survey webinar).
应用推荐