将旋转圆盘电极体系应用于高速镀锌层粗糙度的研究。
Rotating disk electrode system is used to study the coating roughness in high-speed zinc plating.
另外,在阻焊膜涂覆前,用等离子体对印制电路板面处理一下,还可获得一定的粗糙度和高活性的表面,从而提高阻焊膜层的附着力。
In addition, the solder mask coating on printed circuit board, with the plasma treatment, can also obtain certain roughness and high active surface, thus improving the solder coating adhesion.
通过研究缸体的内径变化、陶瓷层的粗糙度和台架试验探讨将微弧氧化技术应用于铝制小型汽油机缸体的内表面处理的可行性。
The feasibility of the application of microarc oxidation technique to the treatment of inner surface of steam cylinder was studied by measuring the change of inner diameter, roughness and bench test.
陶瓷层的厚度和表面粗糙度随着电压值的上升而增加。
The thickness and surface roughness of ceramic layers increase with the voltage increasing.
结果表明:下垫面温度突变引起的温度内边界层与下垫面粗糙度突变引起的速度内边界层具有明显的差异。
The results show that significant differences exist between the velocity IBL caused by the abrupt change of surface roughness and temperature IBL caused by the abrupt change of surface temperature.
本文分析了光固化树脂层间结合机理,根据机械结合理论,增加表面粗糙度,增强层间结合强度。
According to the theory of mechanical bonding, layer-to-layer bond strength was improved by making the surface become more roughness.
分析了引起光谱分析误差的主要因素,如试样脱碳层深度、表面粗糙度、描迹等。
It analyzed main factors of arising spectrum analysis error which including specimen decarburization layer depth, surface roughness, describing, etc.
试验分析认为,水流流态,壁面粗糙度和壁面曲率对边界层特性有明显的影响。
Analytical results show that the now pattern, wall roughness and wall curvature have obviously effect on the boundary layer hydraulic characteristics.
占空比与陶瓷层表面粗糙度成正比;
在利用微波辐射计进行对地观测的过程中,陆地表面特性参数(如土壤水分、土壤粗糙度和植被冠层)是土壤微波辐射的重要影响因素。
Observing the land with radiometer, the land parameters, such as soil moisture, soil roughness and vegetation layer, have great influences on the soil microwave emission.
结果表明,采用新的电镀方法能避免镀铬层裂纹的产生;并能获得表面平整光亮的镀铬层,降低表面粗糙度。
The results show that the novel method can prevent chromium coating from cracking, gain bright and smooth deposit, and reduce the surface roughness.
经表面氧化层处理后,焊料表面粗糙度的降低引起低剪切速率下焊膏粘度的明显升高。
After surface oxide film treatment, the increase of viscosities at low shear rates results from the decrease of surface roughness on the surface of solder powders.
在翼型或机翼的风洞试验中,常用绊线或局部表面粗糙度来固定边界层转捩。
In wind tunnel test, tripping wires or a local surface roughness are often applied to fixing the boundary layer transition on airfoils or wings.
随着基体温度的升高,扩散层的厚度增加,并且合金层表面粗糙度增大。
The thickness of diffuse layer and the surface roughness of molybdenum alloying layer increase with increasing the Ti6Al4V base temperature.
切片层厚越小,表面粗糙度值越小。
结果表明:超音速微粒轰击在表面形成纳米层过程中使材料发生流失和表面粗糙度增大。
Experimental results showed that SFPB treatment can prepare a nanocrystalline layer with the removal of material and increase of surface roughness.
通过对配方和成膜工艺的研究,改善了转移金属层表面的平整度和粗糙度。
The composition and film molding process are studied to improve the planeness and roughness of the surface of transfer metal layer. This technology is mainly used in CFRP metalizing by transfer.
三个主要因素,非理想的软x射线光学多层膜的界面粗糙度和相互扩散层的厚度波动,定量的特点。
Three main factors, layer thickness fluctuation, interfacial roughness and interdiffusion of non-ideal soft X-ray optical multilayers were characterized quantitatively.
三个主要因素,非理想的软x射线光学多层膜的界面粗糙度和相互扩散层的厚度波动,定量的特点。
Three main factors, layer thickness fluctuation, interfacial roughness and interdiffusion of non-ideal soft X-ray optical multilayers were characterized quantitatively.
应用推荐