该豆浆机导流器粉碎效率高、更易清洗；
The fluid director for the soymilk machine has high crushing efficiency and is easy to clean;
第一阀门元件可定位在第一端口中，并且导流器可定位在连接部分中。
A first valve element may be positioned within the first port and a fluid director may be positioned within the connecting portion.
本发明涉及一种家庭制作豆浆、米糊和果蔬的装置，特别涉及一种豆浆机导流器。
The invention relates to a device for making soymilk, rice paste, fruit and vegetables at home, in particular to a fluid director for a soymilk machine.
在分析了导流器承受瞬间冲击型外负荷的作用特性后，对结构计算模型进行了简化；
Upon the analysis to the behavior of the deflector under the instantaneous shock type external loading, the paper simplified the structure calculation model.
经分析原因并对设备进行解体查验，首次发现导流器压盖厚度的微小偏差是产生故障的原因。
After analysis of the trouble and disassembly examination, it was first found that the minor deviation of the thickness of the flow guider's grand was the main reason causing the trouble.
导流器可具有至少一个用于连接第一、第二和第三端口中的至少两个端口而使得流体可在它们之间流动的通道。
The fluid director may have at least one passageway for connecting at least two of the first, second and third ports such that fluid may flow therebetween.
除了以上提到的这些优点，每一级导流器都采用颗粒漩涡抑制技术，防止磨蚀性的颗粒漩涡形成，降低叶轮和泵体的磨损。
In addition to these features, particle swirl suppression ribs in the diffuser provide abrasion resistance by reducing the buildup of abrasives that can cause erosive wear.
介绍并比较了三种自整角传感器角度测量方法的原理、特点，并选用数字测量计算法实现进气可调导流叶片转角检测系统。
The principle and characteristic of three Angle measurement methods are introduced; digital measurement approach is selected to design adjustable guide vane Angle detection system.
双切向环流气体分布器性能的优劣与导流板和套筒结构的密切相关。
The efficiency of twin-tangential annular flow gas distributor was determined by structures of baffles and sleeves.
通过计算分析和试验验证，表明空调器室外机导流罩的宽度存在一个最佳值使室外机的噪声最小。
The results of computation and experiment show that an optimal width of the deflecting ring exists to make the noise generated by the outdoor set minimum.
电机散热应该通过热传导流体的循环流动来完成，这些流体从一体式贮存器流经内铸管道，进入电机定子外壳。
Motor heat dissipation shall be accomplished by circulating a heat transfer fluid from an integral reservoir through channels that are internally cast into the motor stator housing.
研究表明：由于进料螺旋输送器的作用，在一定的导流叶片角条件下存在着双旋流流场。
It is shown that the existence of central screw conveyer produces the contrary swirl flow under some of the swirl vane Angle condition.
应用多层桨自旋导流技术，设计了一种新型自旋导流表面曝气反应器。
A novel surface aeration reactor is designed with incorporation of self-rotating flow guide (SRFG) for multiple impellers.
针对某大型水利枢纽导流底孔弧形闸门，在闸门上布置若干MR阻尼器，采用半主动控制来减小振动。
Semi-active control method was proposed to reduce the vibration of certain radial gate installed with magnetorheological(MR) dampers in some key large hydraulic project.
在不同的导流筒直径、喷嘴直径和喷嘴位置对液固环流反应器中固体流动行为进行考察。
The solid flow behavior in liquid-solid loop reactor was studied with draft tubes, and nozzles of different size and with different nozzle location.
流体贮存器必须为热传导流体提供适当的停留时间，以保证能够进行充分的热交换。
The bottom of the reservoir shall be designed to provide adequate retention time of the heat transfer fluid to ensure positive heat transfer.
结果表明，用此简化计算公式计算的结果与试验数据基本一致，可以用于螺旋片导流式气液分离器螺旋结构设计计算。
The results show that the values from this simplified calculation formula is consistent to the test data and it can be used to design the spiral structures.
反应器包含一个传统的导流筒和三段缩放型导流筒。
The reactor consists of one conventional draft tube and three convergence_divergence draft tubes.
搭建了螺旋片导流式分离器流动场测量的实验装置，并用计算机对实验系统的压力损失和分离液体量进行数据采集。
A set of experimental system used to measure flow field of spiral separator is constructed, with the experimental data, such as the pressure and flow rate of gas and the weight of drained water etc.
通过试验和计算发现，挡板在反应器中起到均匀分布能量的作用，并可取代导流筒。
From the experiments and succedent computations, the importance of baffle is found that it can distribute energy evenly in ALR and may be used to replace the draft tube.
论文从反应技术的角度，在OCO反应器的基础上，开发了同心圆活动导流墙式反应器（OGO反应器）。
According to the reactor theory, concentric-circles reactor with movable partition-wall (called OGO reactor for short) was developed based on the OCO reactor.
固体相含率先增加后减少，对固体相含率而言，当导流筒直径与反应器直径之比为0 5时，固体相含率最大；
When ratio of draft tube diameter to reactor diameter was 0.5, a maximum in solid loading appeared.
在本研究中，以不同集热板倾角安装太阳能热水器模型中，以及装置不同尺寸导流板并配合不同安装角度，为实验分析之控制因素；
Therefore, the controlling factors of this experiment are the flat panel under various inclined angles and the different guiding plates cooperate to various inclined angels.
文章简要介绍了作为哈龙替代品的SQ灭火剂的特点，用实验方法研究了反应器形状、反应器壁厚及导流管壁厚对SQ灭火剂燃速的影响规律，并分析了产生这种影响的原因。
Effects of wall thickness of duct and reactor as well as reactor's shape on combustion rate of SQ fire extinguishing agent are studied by experiments.
开口低速风洞的主要组成部分包括集气装置、蜂窝器、紊流网、整流罩和叶栅型反扭导流片等。
Its main components include gas collecting devices, cellular devices, turbulent mesh, fairing, cascade-type counterclockwise shearing deflector, and etc.
分离器内部的各种设计 （如上导流锥高度的确定 ，下导流锥的倾角 ，排气管高度等 ）均为提高气固分离器的效率和降低阻力。
The size distribution and the velocity distribution in the separators and analyzed in order to decrease the pressure drop and increase the separation efficiency.
开口低速风洞的主要组成部分包括集气装置、蜂窝器、紊流网、整流罩和叶栅型反扭导流片等。
Low-speed wind tunnel opening of the main components of gas-collecting devices, cellular devices, tangled net, fairing and cascade-type deflector, such as anti-twisting.
开口低速风洞的主要组成部分包括集气装置、蜂窝器、紊流网、整流罩和叶栅型反扭导流片等。
Low-speed wind tunnel opening of the main components of gas-collecting devices, cellular devices, tangled net, fairing and cascade-type deflector, such as anti-twisting.
应用推荐