陀螺组合的安装误差会引起陀螺漂移，从而对惯导系统产生影响。
Installation error of gyroscope integrated can lead to gyro drift. Thus, the precision of INS is influenced.
自动调节功能可补偿配合孔的安装误差，具有自锁和非自锁螺纹。
Floating action compensates for mating hole misalignment, Available with locking or non-locking threads.
不必担心，这种轴承因为具有柔性，所以能承受相当大的安装误差。
It is unnecessary to be anxious, for such bearings will take considerable misalignment because of the inherent flexibility.
提出了通过传感器静态标定和坐标变换来减少安装误差影响的方法。
To reduce influence of mounting position error, sensor static calibration and coordinate transform are implemented.
最后，分析了游标卡尺测量误差及标准球安装误差对标定结果的影响。
Finally, the influence of the measurementing errors and the positioning errors on the calibration was analyzed.
座圈的安装面呈球面的轴承，具有调心性能，可以减少安装误差的影响。
Appear before the installation of seat spherical bearings with aligning properties, can reduce installation errors.
在折转光路中，由于安装误差，平面反射元件会存在三维方向的微偏角。
In reflective light path, because of the errors in assembling, planar reflector would have three tiny dimensional angles stray.
介绍并推导双圆弧齿轮在安装误差影响下接触迹间载荷分配的计算公式和方法。
The load assignment formula and the method of the double circular arc gear under the wiring error influence between the contact mark was introduced and inferred.
最后，对具有安装误差的蜗轮副模型进行了有限元分析，得到相应的应力云图。
Finally, we studied the worm gear model with installations error used finite element analysis, and acquired mises stress nephogram.
说明和图纸应包括安装中设备重要部件的处理和吊运，安装误差及特殊预防措施。
The instructions and drawings shall include information of handling and slinging the major pieces of equipment, erection tolerances, and special precautions to be taken in the installation.
由于安装误差的存在，同一个透镜每次安装后进行中心偏测量时测量结果都不同。
Owing to the existence of installation error, measuring the same lens after each installation may result in difference.
系统各齿轮都具有安装误差时，各齿轮副承载情况受误差累加或相反作用的影响。
When every gear has different installation errors, the load situations are influenced by the error accumulation and opposition.
通过讲述浮子液位计的组成和工作原理，分析其系统误差、安装误差和使用误差。
This article introduces the component parts and the operating principle of the ball float liquidometer, and analyses the errors of its system, installation and operation.
在惯导平台多位置静态测漂方案下，对陀螺安装误差角的辨识结果往往很不理想。
The identification result of the gyro misalignment angle in inertial platform is unsatisfactory for the static multiposition test scheme.
给出了考虑安装误差的齿面接触分析算法，并对齿面印痕数字化特征完成了定义。
Tooth contact analysis algorithm with consideration of alignment errors was provided, and the contact pattern digital features were completely defined.
根据桶形基础的特殊形式，采用普通经纬仪对桶基安装误差进行测量是比较困难的。
Because of the special bucket foundation con structure, it is difficult to measure the bucket foundation installation error by using transit.
点接触齿面的接触点位置对安装误差的敏感性是衡量齿面传动性能的一个重要指标。
The error sensitivity of contact position of point-contact tooth surfaces with respect to the mounting errors is an important index to evaluate the gearing performance.
计算机仿真结果表明，当待测距离一定时，光强调制系数随着安装误差的增大而减小。
The computer simulation is performed, and the results show that when the distance on measure is certain, the coefficient of the intensity modulation will decrease with the fixing error increasing.
研究了由陀螺频带不足、量化误差和安装误差，以及姿态更新率过低造成的圆锥误差。
The conic errors produced by frequency band narrow, quantization error, and installation error of gyro and low attitude update rate were analyzed.
研究了存在安装误差时基于加速度计比力信号解算高自旋弹丸角速度和姿态角的方法。
A method of solving the angular speed and attitude angular of high spinning projectile was proposed by accelerometers' specific force signal in existence of installation errors.
在大型堆取料机安装过程中，旋转机构安装误差控制及其调整是一个十分重要的环节。
In the installation process of huge stacker reclaimer the error control and adjustment of the installation of revolving gear is an important link.
当传感器存在刻度系数误差、安装误差和测量偏差时，将会明显降低系统的FDI性能。
However, the sensor errors such as input axis misalignment, scale factor errors and biases, have significant effect on the FDI performance.
在大型堆取料机安装过程中 ，旋转机构安装误差控制及其调整是一个十分重要的环节。
Taking bucket stacker-reclaimer as the example, the main technology, flow and quality control for port machine equipment installation are expounded.
它包括一个专有的安全锁轴承装置，已经通过测试，来提供对振动和安装误差的额外保护。
It incorporates a proprietary Safety-Lock bearing assembly that has been tested to provide additional protection against vibration and installation errors.
提出了根据空间立体几何原理对桶形基础平台进行桶基安装误差测量并保证安装精度的方法。
Based on the theory of solid geometry, a survey method to measure the bucket foundation installation error and ensure the installation precision is presented.
建立了两级星型齿轮传动系统的动力学均载分析模型，考虑了各构件的制造误差与安装误差。
A dynamic analysis model was established for a 2-stage planet gear train in which manufacturing and assembly errors were considered.
实际的六自由度转台存在着制造和安装误差，转台各个铰点的实际坐标与理论值之间会有偏差。
Because the manufacturing error and installing error exist in the actual six DOF platform, there is divergence between each joint point's actual coordinates and its theoretic values.
光学系统杂光指标PST的测量，包含了系统各种安装误差的影响，体现了系统杂光抑制的真实水平。
The PST of stray light includes the influence of system assemble error, and reflects the real capacity of stray light suppression.
光学系统杂光指标PST的测量，包含了系统各种安装误差的影响，体现了系统杂光抑制的真实水平。
The PST of stray light includes the influence of system assemble error, and reflects the real capacity of stray light suppression.
应用推荐