主营轴承铆合模、拆套模等铆合模具。
Main Sales: Bearing riveting die, demolition riveting sets of molds for tooling.
介绍了小型轴承套的胎模锻造工艺,并详述了组合套模的设计要点。
The die forging process for the small type bearing bushings has been described in this article, as well as the design outline of the assembled sleeve die.
介绍了几种连接盘塑件共用一套模架的快换注塑模结构及该模具设计中应注意的问题。
The structure of a rapid-shifting injection mould with a frame Shared by several connection tray work pieces and some remarkable essentials in the design are introduced.
采用套模衬拉及空拉的分段拉伸,不仅具有较高的生产效率,而且还有利于控制管材的偏心缺陷。
By adopting the techniques of stretching with insertion of dies and stretching by sections, a higher productivity can be obtained, and the deficiency of eccentricity of tubes can be controlled better.
模框与底板形成一套模具,搅拌好的浆料通过浇注发泡、静养、初凝过程使之成为可以切割的坯体。
Mold to form a mold box with the bottom, stirred slurry by pouring foam and resting, the initial setting process of making the green body can be cut.
在进行模具设计时,采用半球形凸模等方式可以实现正、反拉深在一套模具,普通液压机上完成加工。
In the die design, the use of spherical punch made the process of deep drawing and reverse redrawing achieved in one set of mold and common hydraulic press.
幸运的是,我的助理经理有一套一模一样的,所以她今天早上要出去复印一些。
Luckily my assistant manager has an identical set so she's going out this morning to get some copies made.
我们以65型挤出机机头来举例,已知机头装配尺寸,要求设计模芯、模套。
We have 65 type extruder head for example, known as the head assembly size, design requirements, die die sleeve.
于1997年引进一套粗加工设备,为客户进行模座及光板加工。
In 1997 to introduce a rough device, the client's mold base and the optical plate processing.
经典特征模理论提供了一套在导体表面形成加权正交系的特征电流,在无穷远球面上形成正交系的特征场。
The mode currents form a weighted orthogonal set over the conductor surface, and the mode fields form an orthogonal set over the sphere at infinity.
并开发了一套以“纱模”为基础的计算机模拟显示系统。
A displaying system of computer simulation was developed based on the "yarn model".
所以,针对覆盖件开发一套实用的修边冲孔模cad系统无疑是十分必要的。
So it is very necessary to exploit a practical CAD system for panel trimming and punching die design.
传统的模具结构是采用模压成型后机外利用专用液压机装备拉开模套,取出集电环制件。
Traditional mold structure removes the set ring work piece after molding machine used outside special hydraulic machine equipped with pull model kit.
通过对左座椅调整器的成形性工艺分析,提出了采用两套复合模结构的方法,并介绍了模具的具体结构及模具工作过程。
Through the analysis of forming technology of regulator of left chair, the method of using two sets of compound die is put forward.
在加热模套时,可放入少量颗粒木炭,通过木炭的燃烧消耗氧气达到减少氧化烧损的目的。
As heating die sleeve, a few grain charcoal is added and oxygen is consumed by charcoal burning so that oxidation burning loss is reduced.
具有模切精度高、操作方便、胶套使用寿命长、成本低等特点。
It has grind high nicety and operation convenience and glue sheath using long life and low cost.
利用这两种模型分别计算了轴承套圈冷挤压组合凹模的预应力,并同拉美公式的计算结果进行了分析比较。
The prestressing force in combined dies to be used for cold extrusion of bearing outer race by the two mathematical models is calculated and compared with the results obtained by Lame formulae.
分析了建筑铝合金型材挤压筒内衬破裂和挤压筒前端面与模套密封处磨损的原因,提出了相应的预防措施。
The causes which aluminium alloy profiles extrusion container internal wall is broken and front seal wall damaged are analysed. The relevant prevention measures are given.
通过分析高强螺栓的成形工艺,对模具结构进行深入探讨,设计了一套热镦模。
Die structure was discussed through the analysis of forming process of high intension screw bolt and a set of hot upsetting tool was designed.
前言:为了保证一种既有斜齿轮又有直齿轮零件在注塑成形后能顺利脱模,给出了一套一模两位,点浇口进料,旋转脱模,胶套式二次分型的双分型面注射模的设计。
To make sure that a plastic part with helical gear and spur gear can be demoulded successfully, an injection mould is designed with double parting faces, point gate feeding and rotating demould.
分析了橡胶缓冲套零件的结构及工艺要求,介绍了橡胶缓冲套注射模的结构特点及工作过程。
The structure and process requirements of rubber cushion cover parts are analyzed, as well as the structural character and working process of rubber cushion cover injection mold are introduced.
重点阐述了锥形套注射模结构中脱模机构的设计要点。
Importantly, the design critical points of demoulding mechanism in the structure of cone - thimble injection mold are stated.
介绍了塑料管套注射模的环形型芯抽芯机构。
A kind of ringed core pulling mechanism of injection die of plastic casing coupling is introduced.
本机配置有大、中、小模头三套可调换,将铜齿轮内的模头及铜板上的刀片取出更换。
The machine equipped with large, medium and small die can be any of three sets of exchange, will die within the copper gear, and replacement of copper on the blade out.
公司主要从事高强高模碳纤维丝和活性碳纤维毡、布的研发生产和销售,并掌握了一套独特的工艺路线和技术参数。
We are specialized in research, production and sales of ultra-strength and high-modulus carbon fibers, ACF felt and ACF fabric. We have mastered a unique set of process routes and technical data.
分析了射钉保护导向套的结构特点,介绍了注射模的结构、型腔的加工工艺和工作过程。
The structure characteristics of the protection guide bush of shoot nail were analyzed. The structure, machining process of the cavity and the working process of injection mould were introduced.
同时对模套壁厚作了强度和刚度计算。
The strength and stiffness of wall thickness of the mould sleeve was calculated.
同时对模套壁厚作了强度和刚度计算。
The strength and stiffness of wall thickness of the mould sleeve was calculated.
应用推荐