介绍了一种用于岩石材料微裂纹观察的复型技术。
A special surface replica technique for microcrack observation of rocks is introduced.
本文介绍了石蜡-铬复型技术的基本原理和方法。
This paper reports on the basic principle and method of the wax-chromium Replica Technique and its application to wood investigation.
将复型技术应用于疲劳小裂纹扩展试验中的裂纹长度测量。
Reconstructed model technique is successfully applied to measure short fatigue crack length in the testing work.
根据我们的经验，简要地介绍了冷冻断裂蚀刻复型的方法和原理。
On the basis of our own experience, the procedures and the principle of the Freeze-fracture-etching-replica technique are briefly described.
通过扭转疲劳试验和塑料复型膜技术研究了中碳钢试样的疲劳短裂纹特性。
The initiation stage and short crack behaviour in torsional fatigue of medium carbon steel was investigated by using a replication technique.
本文应用透射电镜和冷冻复型技术，对15例人胎腹膜壁层间皮细胞作了观察。
By transmission electron microscopy and freeze etching technique 15 human fetuses were utilized to study the ultrastructure of the mesothelial cells on the parietal peritoneum.
借助于高放大倍率的二次复型组织，观察了LF6铝合金超塑变形后的表面晶粒组织。
With the secondary duplicated model structure with high magnification, the surface grain structure of LF6 aluminum alloy superplastically deformed is observed.
目的探讨经口咽前路寰枢椎复位钢板系统（TARP）在难复型寰枢椎脱位的临床应用。
Objective To discuss the application of transoralpharyngeal atlantoaxial reduction plate (TARP) in the treatment of unreducible atlantoaxial dislocation.
采用复型方法对中碳结构钢单边钝缺口试样的非穿透和穿透疲劳短裂纹的演化过程进行了研究。
The transformation behavior of vanadium middle carbon steel during continuous cooling was investigated by means of THERMECMASTOR-Z thermomechanical simulator.
观察结果说阴，用于透射电镜的复型技术是研究木材细胞壁表面形貌的一种具有高分辨率的有效方法。
Results of observation showed that applying the wax-chromium Replica technique to the transmission electron microscope was an effective way...
同时，针对样品制备过程中的各个关键步骤和环节，提出了低合金高强钢萃取复型样品制备的关键技术要点。
The extraction replica key techniques for TEM sample preparation of low alloying high strength steels were introduced in detail.
研究了花岗岩板在单轴压缩应力状态下的微观破坏过程。试验主要采用了液压加载台、光学显微镜、同步录象系统以及二次复型技术等。
Progressive cracking of granite plate under uniaxial compression had been investigated by using a loading frame, which could be well equipped with optical microscope and video recorder.
本文用宏观和微观方法测量了几种高强度钢的疲劳裂纹扩展速率，用金相和断口复型法观察了疲劳断口的微观形态以及与显微组织的关系。
The studies were carried out of the test of fatigue crack growth rate and relative to the microscopic morphology of fracture surface in certain high-strength steels.
对两种晶粒尺寸的中碳钢光滑试样进行了旋转弯曲疲劳试验；应用复型技术监测了短裂纹形成与扩展过程，研究了晶粒尺寸对短裂纹行为的影响。
The process of crack initiation and propagation was observed through replication, and the effect of grain size on the behaviour of short fatigue cracks was studied.
复接器有三种结构：串行、并行和树型。
There are three structures of multiplexer: serial, parallel and tree.
因此可作为地洼型多因复成矿床的一种重要类型及其典型实例。
The mineral deposits in this region stand for an important type and typical example of polygenetic compound ore deposits.
该方法仅需进行一次系统矩阵的分解就可获得高精度的多个复振型导数。
Finally, many complex mode shape derivatives of high accuracy can be obtained by decomposing system matrices only once.
并利用时域最小二乘法和复模圆法对实验数据进行了三维的模态参数和振型分析。
Modal parameters and vibration type were obtained by the method of least squares time domain, complex modal analysis and the experimental data.
本文分别研究了LB型蛋白鞣和复鞣性能，该鞣剂由胶原纤维水解物通过苯酚磺化产物和醛类缩合改性而成。
This study on the tanning and retanning properties of LB type protein syntan respectively was synthesized by the collagen fiber hydrolysates with phenol sulphonate and aldehydes.
准倾斜光纤布拉格光栅，复联光纤布拉格光栅，光纤型耦合器和光连接器。
Pseudo slant fiber Bragg grating, multiple series fiber Bragg grating, optical fiber type coupler and optical connector.
高斯型口径分布所产生的辐射场可以近似地用复射线法来分析。
The radiated fields from Gaussian distributed aperture(GDA)can be approximately analyzed using the complex ray method(CRM).
采用电化学交流阻抗法和极化曲线法研究了环境友好型缓蚀剂钨酸盐及其复配对模拟水中碳钢的缓蚀作用。
The inhibition effect of environmental friendly inhibitors such as tungstate and its complex for carbon-steel corrosion in simulated water is studied by using AC impedance and polarization curves.
电导率的增加是含钪锆过饱和固溶体的分解形成弥散型的复相结构。
The increasing of conductivity is the decomposition of the supersaturate solid solution contain Sc and Zr forming dispersion complex phase.
以无花果、玫瑰茄花萼为原料，用复配型凝胶剂生产无花果玫瑰茄风味果糕。
Taking FIG and Roselle calyx as materials, the FIG and Roselle calyx cake was produced with the complex gel.
本文介绍了复配型乳化剂moh的研制，以及MOH的应用对于降低成本，提高产品质量所起到的作用。
In this paper, the preparation of mixed type emulsifier MOH and the role if plays in reducing the costs and improving the quality are introduced.
用溶剂汽油、萘烷、石油醚按一定比例复配成混合型溶剂，以对茴香胺为原料，用该溶剂合成了3磺酸基对茴香胺，产品中不含致癌物。
The mixed solvent consists of solvent naphtha, decalin, and petroleum ether in a certain proportion, which was used to synthesize 3-sulfo p-anisidine by using p-anisidine as raw material.
为了避免这样的误差，可以采用文中推荐的基于复振型的完全平方组合(CCQC)方法。
In order to avoid such errors, adopting complex complete quadratic combination (CCQC) method based on complex modes is a good solution.
这两种复配型减水剂能明显改善混凝土的和易性，降低坍落度损失和提高混凝土抗压强度。
They can remark ably improve the workability, reduce the gradual loss of lump and improve the compressive strength of concrete.
试验表明阴离子型聚氨酯树脂复鞣剂可提高铬鞣革的收缩温度及力学强度。
The results showed that anion aqueous PU resin retanning agent can improve the shrinkage temperature and mechanics strength of chrome tanned leather.
试验表明阴离子型聚氨酯树脂复鞣剂可提高铬鞣革的收缩温度及力学强度。
The results showed that anion aqueous PU resin retanning agent can improve the shrinkage temperature and mechanics strength of chrome tanned leather.
应用推荐