应用最为广泛的是采用单端基准带系统的接地信号源。
The big no-no is a grounded source using a referenced single-ended system.
新用户应该获取带j 2ee 1.3性能基准的快速入门教程(quickstart),以便于学习。
New users should get a quick start with the J2EE 1.3 performance benchmark for learning purposes.
基准电压产生电路为带隙电路的扩展,节省了资源并得到了高稳定度的基准电压。
The voltage reference generator was the expansion of the bandgap circuit for saving the resources.
不同于常规电压求和带隙基准,电流求和是实现低压基准的主要方法。
Current Summing is the basic method to realize low-voltage reference which is different from that of conventional voltage mode.
设计了一种具有良好稳定性和高精度的带隙基准电压源电路。
A bandgap voltage reference circuit with good stability and high accuracy is designed in this pa - per.
该带隙电压基准源电路中的深度负反馈运算放大器为低失调、高增益的折叠型共源共栅运算放大器。
A deep negative feedback operation amplifier used in band gap reference is a common source and gate folded cascade operation amplifier with a lower offset voltage and a higher gain.
设计了一种高准确度无电阻的带隙基准电压源。
A high accuracy band-gap reference voltage without resistor is designed.
带隙基准电压源之所以是模拟电路中重要的模块,是因为它能够提供近似恒定的参考电压,这个电压不随温度,电源电压,工艺的变化而变化。
Bandgap reference voltages are important analog circuit blocks. It can provide a nearly constant reference voltage which is stabilized over process, power supply and temperature variation.
通过对电压源传统设计中关于速度、噪声、工作温度范围方面的研究,设计了一种带隙基准电压源。
We have provided improvements on speed, noise, temperature operating range issues compared with traditional bandgap reference design.
提出了一种新型的指数曲率补偿带隙基准源电路。
A novel exponential curvature-compensated bandgap reference circuit is presented.
因此介绍了一种采用自偏置低压共源共栅电流源的带隙基准电路结构,用两个电阻代替了偏置电路。
This paper introduces a low supply voltage band -gap reference circuit which used a self-bias cascode current mirror.
主要分析了获得零温度系数的参考电压的机理,通过分析修改其经典结构,给出了可以应用于实际的带隙基准源模型。
Paper analyzes the mechanism of zero temperature coefficient reference, and modifies the classical configuration to deduce the circuit which can be used in practice.
2012年的奥运会将为无障碍性地服务残疾人、老人、带小孩的家庭设定一个很好的标准,这个标准将作为一个基准为此后其他活动提供参考。
The 2012 Games will set an excellent standard of accessibility for disabled people, older people and families with children, which will set a benchmark and act as an inspiration to others.
偏置电流源电路的设计:利用带隙基准电压源提供的,通过运算放大器为系统其他的模块提供一个与温度无关的稳定的电流偏置。
The current bias design: Taking advantage of the bandgap reference voltage, the temperature independent current bias for the system is designed by an operation amplifier.
由此得到温度系数很小的带隙基准电压。
Therefore, we get the bandgap reference voltage with very small temperature coefficient.
带隙基准可提供近似零温度系数和大的电源电压抑制比的稳定电压基准,且与工艺基本无关。
Bandgap Reference can provide stable voltage with nearly zero temperature coefficient and larger PSRR, and also are process unrelated.
本文提出了带权基准方程平差的方法。
The adjustment with weighted datum equations is proposed in this paper.
对基准源的类型和优缺点进行了分析和比较,指出带隙基准源的优点,选取了改进型带隙基准源的结构。
The article analyzed and compared the type, the merits and demerits of voltage reference, pointed out the advantages of bandgap reference (BGR), and the improved configuration of BGR was chosen.
通过对低压低功耗集成电路设计技术的分析,着重设计了一个基于衬底驱动技术的CMOS带隙基准电压源,其带有提高电源抑制比电路和启动电路。
CMOS bandgap voltage reference with low voltage based on the bulk driven technology is designed in this paper, with circuit to improve PSRR and start-up circuit.
二次温度补偿的带隙基准源是先进模拟和混合集成电路中的重要部分。
The high precision band gap reference is a very important part in the advanced analog and mixed-signal ICs.
文中设计了一种高阶温度补偿的精确带隙电压基准,使用0。
带隙基准源是集成电路中的重要单元,输出不随温度、电源电压变化的基准电压或电流。
Bandgap reference source is an important unit in integrated circuits, which supplied reference voltage or current independent of temperature and supply voltage.
提出一种输出低于1V的、无电阻高电源抑制比的CMOS带隙基准源(BGR)。
CMOS bandgap reference (BGR) without a resistor, with a high power supply rejection ratio and output below 1v is proposed.
介绍了一种低压电流模带隙电压基准电路,并提出了一种新颖的启动电路结构。
A low voltage current mode bandgap voltage reference circuit with a novel start-up circuit is designed.
运用带隙基准的原理,提出了一种带启动电路的低功耗带隙基准电压源电路。
A low power CMOS bandgap voltage reference source with a start-up circuit is presented based on the bandgap voltage theory.
研究了低压曲率校正带隙基准源设计技术。
Low voltage curvature corrected bandgap references are designed.
最后在考虑实际因素的基础上,依次设计了时钟产生电路、前置滤波器、带隙基准源、开关电容积分器、锁存比较器和DAC等子模块电路并做了仿真。
The factors which will be encountered are descried and modules include anti-aliasing filter, clock circuit, band gap voltage reference, sc integrator, latched comparator and DAC are designed.
提出了一种新颖的利用负反馈环路以及RC滤波器提高电源抑制比的高精密CMOS带隙基准电压源。
In this paper, a novel high precision CMOS bandgap voltage reference which USES a negative back circuit and a rc filter to enhance the PSRR is proposed.
在此浮动基准面上求取的叠加速度仅取决于低速带底板下伏介质的速度,而与地形、低速带无关。
The stack velocity calculated on the floating datum depends on the velocity of medium underlying the low velocity layer and is independent of topography and low velocity layer.
通过对低压低功耗集成电路设计技术的分析,着重设计了一个基于衬底驱动技术的CMOS带隙基准电压源,其带有提高电源抑制比电路和启动电路。
A CMOS bandgap voltage reference with low voltage based on the bulk driven technology is designed in this paper, with circuit to improve PSRR and start-up circuit.
应用推荐