第一，进行舵回路设计。
将给煤量与球磨机负荷控制回路设计成单回路。
Inlet coal mass and load of the pulverizer control loop is regarded single loop.
多功能控制回路设计，本机可执行5种包装模式。
Takes advantage of multi-function control circuit design, this device can complete5 kinds of packaging mode.
本文提出了一种冗余控制系统中的均衡回路设计的新方法。
In this paper, a new method for the design of equalization loop of redundant control systems is proposed.
行为也可能不当，例如在复制多回路设计时画出额外的回路。
Behavior may also be continue inappropriately, for example, drawing extra loops when copying a multi-loop design.
本文介绍该自动线的气动控制系统、气动回路设计及其特点。
This article introduces the pneumatic control circuit, its design and characteristic.
本文提出从程序特征及生产条件出发选用流体逻辑回路设计方法。
This paper puts forward a method of designing fluid logic circuit according to program characteristics and productive conditions.
外回路采用输出反馈，对已解耦的不同通道分别进行单回路设计。
The outer loop is used to design different loops individually by output feedback.
实现流体逻辑回路设计的优化，过去我国主要是从回路本身上研讨。
Optimal design of logic circuit was mainly obtained from circuit itself in our country before.
并将结果与漂移模型计算结果进行比较，结果可为两相自然循环回路设计、运行提供参考。
Furthermore, the results based on different models are compared, which may provide some references for the practical design and operation of two phase natural circulation loop.
反激式开关变压器和反馈控制回路设计，以及考虑电磁兼容性对电路的改进，是其关键技术。
The design of flyback switching transformer and feedback control loop and the improvement of the circuit for considering electromagnetic compatibility are the critical technologies.
开关式励磁调节器主回路设计中需要考虑的两个主要问题是开关器件的尖峰电压和冲击电流。
Two main problems in designing the main circuit of switching mode excitation controller are peek voltage and over current of switching device.
第三，在仿真分析的基础上，为稳定回路设计做了一些准备工作，主要包括设计相关的电路。
Third, at the basis of the simulation and the analysis, it does some preparation for the design of the stable loops. It mainly contains the design of relevant circuit.
稳定回路是实现高精度跟踪的基础，稳定回路设计的好坏直接影响着整个光电跟瞄系统的跟踪性能。
The stabilizing loop is the base of the high-precision tracking and the design of stabilizing loop affects the whole tracking system's performance directly.
主要原因是锅炉安全阀二次保护回路设计有缺陷，再加上安全阀起跳和回座的整定值与运行额定值相重叠造成的。
The main reasons were due to the defect in the design of safety valve secondary circuit and the overlap of the service rating and the setting for safety valve popping and reseating.
结合液压传动实验台，通过实操的方式参与到液压传动回路设计和仿真的整个过程，激发学生的学习兴趣，提高学习效果。
Students use this software to design and to simulate fluid drive circuit, which will greatly inspire their learning interests and improve their learning effects.
在主回路设计方面，采用IGBT智能模块IPM，能够简化系统构成，降低系统成本，增强系统的可靠性，同时能够胜任各种操作要求。
The application of the IGBT intelligence module IPM in main circuit could simplize the configuration , reduce the cost, enhance the reliability and be competent for all kinds of operation demand.
分析中考虑了定子电阻及换相期间反电势变化的影响，指出了忽略定子电阻后对分析的精确度带来的影响及主回路设计时所应注意到的一些问题。
The effects on accuracy of analysis and the problems that should be considered in the design of inverter circuit after neglecting the stator resistance are indicated.
而当今的理论却略显世故：男人的脑子更加细化，而女人的则更像是精心设计的情感回路。
Today the theories are a bit more sophisticated: men supposedly have more specialized brain hemispheres, women more elaborate emotion circuits.
本论文的内容是飞行器稳定回路的分析与设计。
This paper content is the flight vehicle stabilization loop analysis and the design.
本文主要介绍这种非线性自适应控制系统及其外回路航迹跟踪控制器的设计问题。
This paper presents the design method of this type of nonlinear adaptive control system and its out loop trajectory tracking controller.
锅炉燃烧控制系统设计为两层控制结构：监督级和回路级。
Burning boiler control system is designed in two level control structure: monitoring level and loop level.
验证试验表明，该回路的设计是成功的。
Verifying tests reveal that the circuit design was a success.
研究提出控制学科在回路的多学科设计优化方法。
In this paper, multidisciplinary design optimization method with control discipline in the loop is studied.
针对一类典型的奇异摄动动力学系统提出了双回路变结构控制器的设计方法。
The paper proposes an approach to design a dual-loop variable structure controller for a particular class of singularly perturbed dynamic systems.
本文设计了基于DSP56F805，由速度和电流反馈控制回路构成的伺服系统实时仿真软件，并给出了其设计和编制过程。
This paper illustrates the emulation software architecture of the system based on DSP56F805. The design and implementation of the speed and current feedback loop are described in detail.
文中还着重阐述了两种新试验的回路—补油回路和安全闭锁回路的设计指导思想及具体设计方法。
There has been discussed the main principle and design method of two newly tested circuits - oil-addition circuit and safe-blocked circuit as well.
采用该方法，虽然舍弃了由位置传感器构成位置回路的常规设计方法，但情报雷达伺服系统仍然有较高的定位精度。
Although the general design method of the position loop composed of the position sensor is abnegate, but the information radar servo system has high orientation precision in this way.
采用该方法，虽然舍弃了由位置传感器构成位置回路的常规设计方法，但情报雷达伺服系统仍然有较高的定位精度。
Although the general design method of the position loop composed of the position sensor is abnegate, but the information radar servo system has high orientation precision in this way.
应用推荐