以色列、西班牙产剑杆和喷气织机配件。
论述了喷气织机的一种新型控制系统原理。
The principle of a new type of the air jet loom controlling system is described.
织造成本的提高使喷气织机有被忽视的倾向。
This increases the cost of weaving and tends to make air jet looms less attractive.
降低纬向停台是提高喷气织机效率的重要课题。
To reduce loom stop caused by weft insertion is an important project in improving weaving efficiency of air jet loom.
新技术可被广泛运用于喷气织机和剑杆织机上。
These innovations are available for air-jet and rapier weaving machines.
工业用织物的织造对喷气织机提出了很高的要求。
The weaving yarn for technical textiles places high demands on air jet weaving machines.
探讨一种喷气织机四连杆打纬机构的动平衡方法。
喷气织机采用气流引纬，其织造工艺为小开口大张力。
The air jet weaving machine employs the air picking-up, its weaving technology consisting in small shedding and large tension.
分析了片梭、剑杆和喷气织机上产生纬停的潜在原因。
The potential causes of weft stop pages on projectile, rapier and air-jet weaving machines are analyzed.
文章介绍了喷气织机生产细号高密精梳棉织物生产过程。
The paper introduced the process of weaving super fine tex high density combed cotton fabric in air-jet loom.
总结目前国产喷气织机的现状及对存在的问题分析原因。
The present situation and existing problems of domestic-made air-jet loom were summarized and analysed.
喷气织机后梁系统是控制经纱张力和梭口位置的重要装置。
Back rest system of loom is the main equipment of controlling the warp tension and sheld location.
本文在大量实验基础上，分析了喷气织机引纬管道的流场规律。
On the basis of numerous experiments, the rule is analysed about the fluid fields within the picking channel of a jet loom.
购置喷气织机生产线，可提高坯布生产量40%，增加出口份额。
To purchase OE spinning production lines, which will increase the gray fabric production by 40%, and increase the export volume.
介绍了喷气织机织造牛仔布产生的疵点，指出其对产品质量的影响。
The paper introduces the faults of denim weaved by air jet loom, indicates its influence on quality, and analyse the reasons of faults emerged on denim and presents precauction measures.
分析了喷气织机纬向停台的原因，介绍了与之相关的调整方法及操作方法。
This paper analyses the reason of filling stop motion of air-jet loom and introduces some methods in adjustment and operation.
现已拥有162台日本丰田公司生产的全自动喷气织机及相配套的前道设备。
So far we've owned hundreds of superior mechanical including 162 Sets Air-Jet Looms, which made in Japan and 2sets of Sizing Machines.
文章分析了喷气织机在织造双向弹力织物时，各工序应注意的问题及解决措施。
The problems existed in the process of weaving two-stretch elastic fabric on air-jet loom are analyzed, and the solutions are presented.
通过对影响喷气织机顶向和侧向经位置线的因素的分析，得出喷气织机经位置线设定的原则。
According to analyse the effect factors of vertical view warp line end end view warp line on air-jet looms, the author gives a set up principle of them.
介绍了ZAX9100型喷气织机的技术参数，分析了该机适用性广和节能降噪等性能特点。
Introduction is done to the specification of the air-jet looms ZAX9100. Analysis is done to the application and the energy economy as well as the noise reduction.
纬纱前端的速度低于后部的速度，纬纱会弯曲，这就要求喷气织机的梭口应大于有梭织机的梭口。
The front moves slower than the rear and the yarn buckles. The result is that usually the warp shed must be larger than that for a shuttle loom.
我公司为国有大型纺织企业，现有进口喷气织机200台，大量生产服装家纺面料，欢迎您的光临！
Our company for the state-owned large-scale Textile enterprise, existing import air-jet loom 200, mass production clothing spins the lining, welcome you the presence!
探讨如何运用系统工程，优化各工序工艺和技术标准，提高半成品质量，确保喷气织机的效率和质量。
It discusses how to utilize systematic engineering to optimize the processes and technical standards of air jet loom, tries to improve the quality and efficiency.
喷气织机主辅喷嘴性能的好坏直接影响到织机气流引纬的质量，因此了解喷嘴气流场的压力情况十分必要。
The quality of is directly influenced by the performance of air-jet loom nozzle, so it is necessary to measure the pressure of air field which is formed by the nozzle.
本文采用附加扭转弹簧的方法对国内某一型号的喷气织机四连杆打纬机构进行动平衡优化，取得了良好的效果。
The method of add-on torsional spring is used in this paper to optimize the dynamical property of air-jet loom, and the good effect is achieved.
为了在单织轴喷气织机上顺利生产平纹加缎纹条联合组织织物，对纱线的强力、条干CV等方面提出了更高的要求。
To produce join stitch fabric which is combined plain weave with stain in single loom bean air-jet loom, higher demand for yarn strength and evenness CV were proposed.
后梁系统作为喷气织机的重要组成部分，它是经纱张力的检测与调节机构，其动态特性反映了经纱张力的波动情况。
As one of the most important part of air-jet loom, back rest system is the detected and adjusted structure of warp tension, and its dynamic behavior reflects the fluctuation of warp tension.
根据丽赛纤维的相关性能，对在喷气织机上织造丽赛纤维织物的织部各工序工艺及注意事项作了探讨，取得了较好的效果。
Based on the related features of Richcel fiber, processing technology in producing Richcel fabric on air-jet loom and the attentions are explored in the article, resulted in good production.
针对含磁流变阻尼器的后梁系统的被动控制、半主动控制仿真实验对磁流变阻尼器在喷气织机上的运用的进一步研究有一定参考价值。
And also the emulated experiments about the back-rest system with MR damper can be reference of the research of application of MR damper on air-jet loom.
使用CVI软件设计了一种基于虚拟仪器的频谱分析仪，并将其运用于喷气织机振动传感器输出信号测试与分析中，建立了整个测试系统。
A VI-based spectrum analysis instrument using CVI software is designed and it is used to test and analyze sensor output signal of jet loom vibration. The whole testing system is established.
应用推荐