提出不等温的燃煤热解反应动力学模型。
Nonisothermal kinetic model of coal pyrolysis has been proposed.
吸附固定化微生物对DBP的降解符合一级反应动力学模型。
The degradation reaction of adsorptive immobilized microorganisms on DBP was according with the first-order model.
解决了微分方程组的刚性问题，提出了混合裂解反应动力学模型。
The stiffness problem of differential equation set has been solved and a kinetic model of simultaneous pyrolysis reaction has been proposed.
运用模糊数学理论，提出了一种新的筛选反应动力学模型的方法。
A new method for screening models of reaction kinetics is put forword by using fuzzy mathematical theory.
可用两段一级反应动力学模型来较好的描述污泥的主要燃烧过程。
Sludge combustion process could be divided into two stages and described by the first order reaction kinetics model.
由反应机理推导出反应动力学模型。并对模型参数进行了估计。
The kinetic models were derived from the reaction mechanism and the parameters in the models were estimated.
该结果可为催化重整单事件反应动力学模型的建立提供理论基础。
The results provide the foundation for establishing the single-event micro-kinetic model of catalytic reforming.
通过模型筛选和参数估值，得到了环己烷水蒸汽转化反应动力学模型。
Through model screening and parameter estimation, a kinetic model of cyclohexane steam reforming reaction is obtained.
利用固化反应动力学模型对复合材料成型工艺的固化工艺进行了模拟计算。
The simulating calculation of composite curing process was carried out by means of cure kinetic model.
利用反应动力学方法，探讨了含有多种中间复合物的酶催化反应动力学模型。
Taking advantage of kinetic method, we discussed the kinetic model Of multiple substrat enzymatic reaction.
探索环氧氯丙烷法活化琼脂糖凝胶的最佳反应条件，建立活化反应动力学模型。
To explore the optimal condition of sepharose activation by means of epichlorohydrin and establish the kinetic model of activation process.
动力学分析表明：酯交换反应在转化率为95%之前，符合二级反应动力学模型。
The analysis of transesterification kinetics shows that the transesterification obeys a second-order reaction kinetics model when the transform ratio is under 95%.
研究结果，为研究松木的热解反应动力学模型及对其合理利用提供了一定的理论基础。
The research results offer a certain theory basis for pyrogenation reaction dynamics model and reasonable utilization of pine wood.
以四氟化铀与水蒸汽反应为例，说明建立气——固非催化反应动力学模型及其参数估计方法。
With the reaction between uranium tetrafluoride and steam as an example, the method for the development of the gas -solid non-cata…
对剧烈失重区间建立了反应动力学模型，求解出此温度区间的表观活化能、频率因子等动力学参数。
Based on the equation, such kinetics parameter values as the apparent activation energy and the Arrhenius factor were determined.
本文介绍了当前多相光催化反应体系中反应动力学模型以及反应器数模研究领域内的主要方法及成果。
This article introduces the main existing methods and achievements in the field of the math models of reaction kinetics and reactor of the heterogeneous photocatalysis reaction system.
建立了固定化纤维素酶的反应动力学模型，该模型以米氏方程为基础并考虑了产物竞争性抑制的影响。
A kinetics model was developed for predicting and simulating immobilized cellulase performance, which follows Michaelis_Menten kinetics with competitive product inhibition.
该平台基于裂解反应动力学的严格机理模型和分子反应动力学模型，支持对多种热裂解原料的裂解过程模拟。
Based on the precise mechanistic model and molecular reaction kinetic model of cracking reaction kinetics, the platform can support the simulation of cracking process with various feeds.
该平台基于裂解反应动力学的严格机理模型和分子反应动力学模型，支持对多种热裂解原料的裂解过程模拟。
A six-lump kinetic model was derived on the basis of FCC reaction mechanism to represent the FCC naphtha olefin reformulation.
通过运用新型的内环流反应器对氯化苄光氯化反应机理和宏观状态的分析，建立了氯化苄氯化的连串反应动力学模型。
The kinetic model of consecutive reaction for chlorination of benzyl chloride was built by analyzing the reaction mechanism and macroscopic stage.
测定了一系列的动力学数据，通过数据拟合确定了动力学参数，得到反应动力学模型，并检验了动力学模型的可靠性。
Reaction kinetics model is proposed and kinetic parameters are determined at the experimental conditions. Model predictions agree well with experimental data.
本文针对目前湿法炼锑工艺过程研究的需要，对类似于辉锑矿浸出过程的液-固间歇式多相反应动力学模型进行了推导。
A model was developed for the kinetics of the liquid-solid phase reactions in a intermittent reactor, such as the leaching process of stibnite in the antimony hydrometallurgy.
并采用该反应动力学模型对TS- 1质量分数、溶剂中水质量分数对在不同温度下的双氧水转化速率常数进行了关联。
This reaction kinetics model was used to correlate the TS-1 concentration, the content of water in solvent with the H_2O_2 conversion rate rate under different temperature.
杂交是核酸研究中一项最基本的实验技术。我们导出了核酸在石英晶体微天平电极上的杂交反应动力学模型。并对模型进行了验证。
Hybridization is a basic experimental technology in the study of nuclear acid. The kinetics model of hybridization reaction is deduced in quartz crystal microbalance and test.
基于上述试验研究，本文采用双组份分阶段一级反应动力学模型，分别计算了在空气和氮气两种气氛下固体可燃物的表观动力学参数。
Based on the previous TGA studies, double components multi-step first order reaction kinetic model was used to describe the process of pyrolysis of wood.
该文导出了核酸探针在石英晶体微天平电极表面上的杂交反应动力学模型，并通过实验对导出模型进行了验证、计算出相关动力学参数。
The dynamic model of nucleic hybridizing reaction on the surface of the electrode of quartz crystal microbalance(QCM) was deduced, and it was well validated.
本文针对催化裂化工业装置的提升管反应器以三集总催化裂化反应动力学模型为基础，利用工业装置的现场数据对模型中的参数进行了拟合。
Based on three lumping kinetic model of catalytic cracking, the parameters in the model are estimated with actual operation data of a commercial catalytic cracking riser.
本文介绍了应用序贯实验设计方法对“B109”型催化剂中温变换反应动力学竞争模型进行模型筛选及参数估计的过程。
In this paper a sequential experimental program used for model discrimination and parameter estimation of kinetic models for the high temperature-shift reaction over "B109" catalyst is presented.
提出了一个新的直流反应溅动力学模型。
A novel kinetics model for dc reactive sputtering was proposed.
提出了一个新的直流反应溅动力学模型。
A novel kinetics model for dc reactive sputtering was proposed.
应用推荐