该机的直流牵引部采用具有电流反馈和电压反馈的双闭环调速系统。
The d. c. traction portion of which comprises current and voltage feedback to form double closed-loop speed adjustment system.
应用模糊自适应对直流双闭环调速系统中的转速调节器的比例、积分参数进行整定。
By using the fuzzy self-adaptation, this paper adjusts the rate and integral parameters of the speed-adjusting system of DC double closed-loop.
本文提出采用带有加速度调节器的双通道控制模式可提高双闭环调速系统的品质因素。
To improve quality factor of two closed speed regulation systems, this paper advances the two - channel control method used with acceleration regulator.
在数字复合正交神经网络的基础上提出一种模拟复合正交神经网络，并用于直流双闭环调速系统中。
This paper covers an analog compound orthogonal neural network controller and its application to two closed-loop DC speed governing system.
结合无刷直流电机双闭环调速系统和风电场功率控制要求设计了飞轮储能系统充电运行的控制方案。
According to the double closed loops speed regulation system and requirements for the power control for the wind farm, a novel control strategy for the charging process of the FESS is designed.
本文根据模糊控制理论设计了模糊控制器，并将PID控制和模糊控制相结合，用于直流双闭环调速系统。
This article is based on fuzzy control theory and design of fuzzy controller, and PID control and fuzzy control, for DC double loop system.
利用该平台验证了提出的变负载直流电机双闭环调速系统的非线性状态空间模型及其参数辨识方法的有效性。
The platform verified that the proposed variable load DC Motor Speed Control System with nonlinear state space model and parameter identification method is effectiveness.
目前，直流电机双闭环调速系统模型主要有理想模型、二阶线性模型以及在不考虑负载扰动或恒负载情况下的非线性模型等。
The DLM model mainly includes the ideal model, the second-order linear model and the non-linear model in constant load or without considering the load disturbance, and so on.
文章就典型的直流双闭环调速系统设计方法进行说明。针对电枢电流不连续时，系统参数发生变化，造成系统性能变差，列出相应的电流环调节器参数的求法。
For solving the problem that DC variable speed system becomes unsteady when armature current is seriously discontinuous, a parameter variable regulator is presented in this paper.
采用工程设计方法对双闭环直流调速系统进行辅助设计，选择调节器结构，进行参数计算和近似校验。
According to engineering design method a double closed-loop DC motor control system was designed, a modulator structure was selected and computed, and its parameter was corrected.
基于观测出的状态信息，构成了转差频率控制的转矩速度双闭环新型变频调速系统。
Utilizing the information observed, a new type of slip frequency controlled torque-speed double closed loop system is developed.
本文对用Z—80单板机实现双闭环直流调速系统DDC控制进行研讨。
In this paper, DDC Control of double closed loop DC governing system with Z-80 Single board micro Computer is discussed.
对8098单片机控制的全数字直流双闭环pwm调速系统进行了研究，探讨了该系统在中小型功率直流电机上应有的可行性。
This paper studies a DC double closed loop digital PWM speed adjusting system controlled by 8098 single chip computer to explore the feasibility for the middle or small power motors.
以给定积分器电路和双闭环晶闸管供电直流调速系统中等效速度环调节回路为例，说明求解过程。
The resolving Procedures represented by resolving set-integrator circuit and equivalent speed loop regulating circuit of double close oop SCR-D system.
介绍一种双闭环控制变频调速系统。
本文对一从瑞士引进的应用于合成纤维成条机的交流串级调速双闭环系统进行了理论分析与现场调试。
The theoretical analysis and field adjustment of a AC cascade speed regulating system with double closed-loop employed in a synthetic fibre bar making unit imported from Switzerland are conducted.
在分析转速、转差双闭环交流调速系统动态结构图的基础上，提出了系统的设计方法，并给出了四象限运行实验结果。
On the basis of analysis of block diagram of AC speed driver system with speed and slip ratio double closed loops, a system design method is presented with the four quadrants experiment results.
根据电流双闭环调速原理，采用6ra70直流全数字调速装置与P LC结合，控制材轧机电系统。
According to the adjusting principle of current bi-colsed, PLC and 6ra70 digital DC speed regulating device is adopted, which controls over the system of the rolling mill.
本文给出由智能功率模块IPM构成的印制绕组电动机（以下简称印制电机）双极N倍频PWM可逆调速系统，它采用智能PID 进行闭环控制。
This paper gives a kind of Printed Motor driver, which uses technology of Intelligent PID, N times PWM and intelligent power module-IPM.
此设计利用晶闸管、二极管等器件设计了一个转速、电流双闭环直流晶闸管调速系统。
The design uses thyristors, diodes and other devices designs a speed, current double-loop SCR DC converter system.
其次采用了两种不同方法对斩波串级调速系统的斩波回路进行了建模和分析，并得到斩波双闭环控制结构图；
Then two different method is given to analyze chopper and mathematics model is based, so double-close-loop control chart is got.
同时针对系统中的关键部分无刷直流电机采取了全面优良的控制策略，包括转速外环电流内环双闭环调速控制，死区补偿，换相脉动分析等。
The Brushless DC Motor, important part of the system is well controlled including two-closed-loop control method, compensation for dead-time and analysis of fluctuation about swapping phases.
调速部分为双闭环直流调速系统，由转速环(内环)和电流环(外环)串联组成。
The part of timing is a double closed loop DC timing system, and it is composed of rev loop (internal loop) and current loop (external), which are series-wound.
软件实现了调速系统的双闭环调节，其中速度环采用滑模变结构控制，电流环则是经典的PI控制。试验结果说明该调整系统有较好的动态和静态性能。
The software comes true the double closed loop regulator, therein the velocity loop is the variable-structure control, and the current loop is the classical PI control.
给出由智能功率模块IPM构成的印制绕组电动机(简称印制电机)双极N倍频pwm可逆调速系统，它采用智能PID进行闭环控制。
The printed motor driver, which USES technology of intelligent PID is given, Ntimes PWMand intelligent power module_IPM.
给出由智能功率模块IPM构成的印制绕组电动机(简称印制电机)双极N倍频pwm可逆调速系统，它采用智能PID进行闭环控制。
The printed motor driver, which USES technology of intelligent PID is given, Ntimes PWMand intelligent power module_IPM.
应用推荐