单片机控制系统由微机和工业生产对象两大部分组成。
Single chip computer control systems and industrial production of objects by the two major components.
介绍了一种新型实用交通灯单片机控制系统的设计方法。
This paper introduces a kind of new and practical traffic lights system which is based on single-chip microcomputer control.
针对磁放大器式电源埋弧自动焊机设计了单片机控制系统。
A control system based on single chip microprocessor is designed for submerged arc welder with magnetrol power source.
本文讨论了一种用于控制特种电阻焊机的单片机控制系统。
A micro controller unit control system for special type resistance welding machine is developed in the pa-per.
运行结果表明所设计的单片机控制系统运行可靠、操作方便。
The results from a trial run show that the control system is reliable and convenient.
完成跟踪后,单片机控制系统自动进入休眠状态,等待下次驱动。
After the tracking, a single-chip microcomputer controls the system to be in the resting state automatically and wait for next driving.
因此,单片机控制系统正以空前的速度取代着经典电子控制系统。
Therefore, the MCU control system is at an unprecedented rate to replace the classic electronic control system.
主要介绍井式渗碳炉渗碳过程中单片机控制系统的构成和设计要点。
This paper mainly introduces the construction and designing essentials of microcontroller control system in cementite process of pit cementite furnace.
研制了一套药芯焊丝生产线电磁振动送粉机构及其单片机控制系统。
A set of electromagnetic vibration powder feeding apparatus of the flux cored wire production line and its single chip controlling system have been designed in this paper.
对液压电梯速度反馈单片机控制系统进行了理论设计和实验的研究。
This paper is about the theoretical and experimental research on the speed feedback control systems of hydraulic elevator using single chip microcomputer.
本文介绍了配料生产过程中单片机控制系统的硬件结构及软件流程。
The structure of hardware and process of software about the single - chip com pute controlling system on the circuit of tobacco burden are stated in the paper.
此方法是可编程序控制系统或单片机控制系统的逻辑线路设计基础。
This method is the logic design base of programmable logic control system or single-microcomputer control system.
介绍了8031单片机控制系统的硬件组成、软件结构和程序方框图。
It also recommends the hardware and software composition and program block diagram of 8031 single chip microcomputer control system.
DP801单片机控制系统采用宏指令,指令功能直观,初学者极易掌握。
The control system of DP801 chip microprocessor adopts macroinstruction which is characterized by its audio-visual function, so the beginners can easily master the operation.
提出了一种用于药用旋转式压片机片剂药品称重与计数的单片机控制系统。
The medicinal weighing and counting control system based on micro-single chip computer is presented for medicinal extruder.
提出了一种在分布式单片机控制系统中,多机间进行高性能串行通信的方案。
The scheme of the serial communication of high performance among multi-processor is provided in the control system of the single chip processor of distributing type.
本文提出一种在分布式单片机控制系统中,多机间进行高性能串行通讯的方案。
A kind of high performance multi-computer serial communication scheme for distributed single-chip microcomputer control systems is proposed.
我公司是一家专业开发和生产32位处理器的单片机控制系统,拥有雄厚的技术力量。
Our company is a professional development and production of 32-bit processor MCU control system, with strong technical force.
介绍了全自动电热膜沸水器单片机控制系统,讨论了控制系统硬件与软件设计有关问题。
This paper describes a single chip microprocessor control system of automatic electrothermal film water boiler and discusses some problems in the design of hardware and software of the control system.
论述了控制系统各器件的选择和单片机控制系统的软硬件设计,以及最后的调试和结果。
The selection of each apparatus of control system, the design of software and hardware of MCS control systems, and last debugging and result …
单片机控制系统采用80c 196kc,充分利用它的特有资源,如富有特色的HSI。
The used chip as control is the single chip 80c196kc. Some source ports, such as HSI.
本系统主要由数字频率合成电路、调制电路、宽带功率放大、单片机控制系统等模块构成。
The system is mainly composed of Digital Synthesis circuit, modulation circuit, broadband power amplifier, the MCU control system, and a module.
主要介绍该合成器的构成及关键部件电路,并阐述了单片机控制系统的硬件结构及软件设计方法。
In this paper mainly describes the synthesizer and its key circuit, also the hardware structure of single chip microcomputer controlling system and design method of software.
本文介绍了某型无人驾驶飞机系列MCS - 51单片机控制系统的软件容错设计方法与实现。
This paper presents a fault-tolerant software design method and its application to the micro-controller system (MCS-51) of a type of Pilotless aircraft.
介绍了一种全自动绕线机的单片机控制系统,主要对绕线机的硬件和软件两方面的设计进行了研究。
In this paper, the single-chip microcomputer control system for the fully-automatic wire winder is introduced, including the hardware and software design.
压电传感器和驱动器直接粘贴在母体材料上,和单片机控制系统一起构成了压电式主动减振智能结构。
Piezoelectric sensors and actuators are adhered to the base material directly, and compose the active vibration control system along with the single chip.
简述了脉冲等离子弧焊接的特点,介绍了该脉冲等离子弧焊接的单片机控制系统总体设计思想及其组成。
It describes the feature of pulse plasma arc welding and introduces the general design thinking and its composition of SCM control system for the pulse plasma arc welding.
介绍了智能化全自动电开水器的功能以及基于EM78P4 5 8单片机控制系统的硬件、软件设计。
The function of intelligent electric water heater and the design of hardware and software based on EM78P458 embedded microcontroller are introduced.
报告了为YC—4020型激光视网膜测试仪配制的单片机控制系统的软件、硬件和打印部分的设计及原理。
The design and principle of the hardware and software and the printing part of the YC-4020 laser retinal - cerebral MTF tester are introduced in this paper.
报告了为YC—4020型激光视网膜测试仪配制的单片机控制系统的软件、硬件和打印部分的设计及原理。
The design and principle of the hardware and software and the printing part of the YC-4020 laser retinal - cerebral MTF tester are introduced in this paper.
应用推荐