简述了转炉半钢炼钢的工艺特点。
The technological properties of the converter semi-steel steelmaking were Abstract ly introduced.
本文主要阐述锻造半钢热轧辊的制造工艺技术。
This paper mainly describes the manufacturing technology for forged semi-steel hot mill rolls.
针对攀钢半钢炼钢的特点,设计了高供氧强度的新型氧枪。
According to the characteristics of steelmaking with semi-steel at PZH steel, the structure and spray nozzle of oxygen lance for high supply intensity were discussed.
用增碳剂和脱硫剂对冶炼高钛渣副产半钢进行了增碳脱硫试验研究。
Using carburizing agent and devulcanized agent, experiment of carburisation and desulphuration for semisteel which in smelting high titanium slag by electric cooker has been studied.
结果表明:用冶炼高钛渣的副产半钢生产球墨铸管在工艺上是可行的。
As a result, it is feasible that making of ductile iron pipe use of semi-steel.
并对攀钢半钢炼钢的温度控制及热补偿技术的完善与改进提出了建议。
Accordingly, proposals are given on improvement and modification of temperature control and thermal compensation technologies during semi-steel steelmaking Panzhihua Iron and steel co.
分析现生产半钢子午线轮胎带束层胶料配方的不足,并提出改进措施。
The disadvantages of the existent belt compound formula in the production of steel-belted tire were analyzed and the countermeasures were proposed.
利用冲击疲劳试验,研究了稀土变质及热处理对低铬半钢抗冲击疲劳性能的影响。
The effect of re modification and heat treatment on impact fatigue property of low chromium cast semi steel was studied by means of impact fatigue test.
利用冲击疲劳试验,研究了稀土变质及热处理对低铬半钢抗冲击疲劳性能的影响。
Effects of re modification and heat treatment on carbide morphology and mechanical properties of cast semi steel were studied.
利用冲击疲劳试验,研究了稀土变质及热处理对低铬半钢抗冲击疲劳性能的影响。
The effect of re modification on the microstructure and impact toughness of wear resistant white cast iron are investigated.
利用冲击疲劳试验 ,研究了稀土变质及热处理对低铬半钢抗冲击疲劳性能的影响。
The effect of SST103 quenching medium on hardness distribution and cracking character of low chromium semi-steel were studied.
研究改性锦纶66帘布在半钢子午线轮胎中的应用,并与高模量低收缩聚酯帘布进行比较。
The application of modified nylon 66 cord in LTR tire was investigated and compared to that of HMLS polyester cord.
试验研究改性间苯二酚-甲醛树脂GLR-20在半钢子午线轮胎胎体帘布胶中的应用效果。
The application of a modified resorcinol-formaldehyde resin GLR-20 in the carcass ply compound of PCR tire was experimentally investigated.
试验研究以活性氧化锌减量替代间接法氧化锌在斜交轮胎和半钢子午线轮胎胎面胶中的应用效果。
The application of the active zinc oxide instead of the indirect method zinc oxide was experimentally investigated in the tread compounds of bias ply tire and steel-belted tire.
2波形护栏板是一种半钢型防护设施,韧性很好,车辆撞击时,能圆滑的国家,迫使车辆回到正常的线。
2 waveform guardrail plate is a semi steel protective equipment, toughness is very good, the impact of the vehicle, able to smooth the country, forcing the vehicle back to the normal line.
介绍了攀钢在半钢炼钢工艺条件下进行的溅渣护炉实践和所取得的成效,对溅渣护炉存在的问题进行了分析。
The slag splashing practice and obtained results were introduced under conditions of steelmaking from semi-steel at PZH steel.
通过分析半钢冷锭加热裂纹产生原因,以及对半钢冷锭加热速度进行理论计算,制订了切实可行的加热工艺曲线。
Analyzing the reasons of semi-steel cold ingots crack occurred in heating and theoretically calculating heating speeds of semi-steel cold ingots, a practical curve of heating process is worked out.
产品特点:强力高,模量高,收缩率低,抗蠕变性和尺寸稳定性优异,是生产半钢子午线轮胎最佳骨架材料之一。
Character: high breaking tenacity, high modulus, low shrinkage, good creep-resistance and dimensional stability, one of the best reinfocement materials for semi-steel radial tire.
在半钢炼钢工艺下,通过优化转炉的供氧操作、提高操作水平、对煤气回收系统进行优化改造,提高了转炉煤气的回收量。
The recovery quantity of converter gas got increased in semisteel steelmaking process by means of optimizing oxygen feeding, improving operation level, reforming gas recovery system.
为此,本文得出如下结论:v、ti在半钢轧辊中起到了析出强化的作用,可以明显改善轧辊组织性能及其综合使用性能。
So we have some conclusion that the vanadium and titanium take effect in the v-ti smil-steel roller with separate out strengthening. it can be evidence improving roller's organizing and using.
数百艘船的钢壳在冰冷的北大西洋中裂开,其中12艘船裂成两半沉没。
The steel shells of hundreds of the ships cracked in the icy north Atlantic, and 12 broke in half and sank.
大约有一半的铸铝工艺是高压模铸(HPDC),在这种工艺中,通过压力将液态铝合金注入钢模,或模具。
About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
或者40克钢切燕麦(大概半杯或四分之一杯)。
Or 40 grams of steel cut oats (about half a cup or a quarter of a cup).
他们生产的钢比我们生产的少一半。
他们生产的钢比我们生产的少一半。
但是剩下的立面包裹着一个半立方体面,由釉面陶瓷瓷砖粘贴在不锈钢金属网格上而构成。
But the remaining facades are wrapped with a semi-solid surface comprising vitrified ceramic tiles fixed to a stainless-steel wire lattice.
试验结果表明:涂层刀片干铣削高强度钢的加工性能优异,工件加工表面质量达到半精磨水平。
The advantages of coated cemented carbide tool in dry milling of high-strength steel are demonstrated, and the workpiece surface roughness reaches the level of semi-finishing grinding.
增加钢半墙建筑。
增加钢半墙建筑。
应用推荐