该系统软件设计采用模块化设计方法，包括自动操作模块、手动操作模块、串行通信模块等。
The design of software applies the way of modularization and consists of auto-operated module, manual module and serial communication module, etc.
在系统软件设计中，根据系统技术要求和控制律，给出了系统初始化软件和各功能模块软件的设计。
In the software of the system, the initialization section and function modules are designed according to technology requirements and control rules.
系统软件设计包括ADMC401及ST16C 554的初始化程序和通信协议等，其初始化负责设置操作每个通道所需参数。
The software design of system includes the initial program of ADMC401 and ST16C554 and communication protocol, etc. Parameters of each channel were set up by initialization.
系统软件设计：包括PCI驱动的开发，接口芯片的初始化设计；dsp的软件设计。
System software designs: embracing the PCI driver, initialization the interface chip and the software of DSP.
对系统软件设计、软件构成进行了分析，达到了应用软件结构和功能最佳化。
The software design and composition of the system are analyzed and optimizations of the application software structure and function are realized.
整个下位控制系统软件开发采用了开放式、模块化的设计方法，方便用户使用及功能扩展。
The whole lower software system ADAPTS the method of open and modularization architecture, it's convenient for users and function expand.
系统软件采用模块化结构设计及编制。
The system software is designed and programmed as modular structure.
分析了系统软件的功能，采用模块化软件设计方法，设计了控制系统主程序、中断服务程序以及子程序。
After analysis the function of system software, main program, interrupt service program and subroutine were designed use modeling develop ways.
根据中试采矿模拟实验方案，运用机电一体化技术研制了一套作业模拟及动力学测试实验系统，并进行了系统软件和硬件设计。
A set of task simulation and kinetic measurement experimental system were built according to experimental scheme by use of mechatronics. Hardware and software of the system were designed.
按照数据库设计的过程及设计思想介绍微机机房数据库管理系统软件的模块化设计方案。
According to the design process and idea of database systems. The MIS software modularization design of public computer lab was introduced.
全面介绍了采用模块化设计方法所设计的系统主程序及设定、预压、通电、中断、模糊控制、熔核尺寸预测子程序等系统软件。
The soft-wares of system main program adopting modularization designing method and subprogram of setting, prepressing, electrifying, interrupting and fuzzy control are generally introduced.
系统软件包括上位机系统软件和下位机系统软件，软件的设计采用结构化模块设计方法。
The system software included upper computer system software and lower computer system software. Method of structural module was adopted in the design of the system software.
如何有效的在网络底层协议的设计与开发中应用模块化的思想，加速网络底层系统软件的开发效率和提升系统的性能是很有意义的。
It's significant that how to apply the method in the design and development of network basic protocols to faster the development and improve the quality of network system.
该文介绍了运用参数化设计技术进行离心风机CAD系统软件设计的方法。
This paper discusses the method of parameter design technology in developing TLT Blower CAD system.
本文基于P ROFI BUS 现场总线，提出对提升机电控系统进行网络化的设计和研究，着重分析了系统软件结构。
The paper introduces the design and research of network electric control system of hoist based on PROFIBUS field-bus, emphatically analyzes its software structure.
进行了系统软件的总体设计，开发了系统初始化、控制算法和通信模块软件。
Next, the software of the system is designed, which consist of the module of initialize, module of control algorithm and module of communication.
系统软件包括主程序，市电过零中断服务程序和多种子程序构成，采用模块化方法设计。
The system softwares include main program, voltage zero interrupt program and other sub-program, The system is designed with the model block.
系统软件分为上位机软件和下位机软件两个部分，文中对下位机软件进行了开发，采用了模块化设计。
The software of this system is composed by the upper computer software and the lower computer software; this paper develops the lower computer software and applies modularization design.
本系统软件部分采用模块化化程序设计，根据功能将整个控制系统划分为几个模块。
The software part adopts the modularization design, the whole process is divided into several large modules according to function.
系统软件采用模块化设计架构清晰，通用性和可拓展性强。
By means of modularization design, the structure of system software is clear, the commonality and expandability are strong.
系统软件采用软件工程设计方法，实现程序结构化，功能模块化。
The system software USES the design of software engineering to realize the structurization of the program and the modularity of the functions.
系统软件设计包括：上位机软件设计、下位机软件设计、模块化通讯及协议。
The ARM based design of cigarette online detection machine is divided into hardware design and software design.
VI设计集团设计的全自动化控制系统软件的BiorepPerifusion系统。
VI design Group designed the full control system software to automate the Biorep Perifusion system.
VI设计集团设计的全自动化控制系统软件的BiorepPerifusion系统。
VI design Group designed the full control system software to automate the Biorep Perifusion system.
应用推荐