使用置信区间预估方法对曲轴和凸轮轴信号进行了动态正确性检测;
The test injections and the pattern recognition were activated when the camshaft or crankshaft sensor signal were missing during limp home.
在无人机动态测试过程中,故障注入试验结果表明了这种方案的正确性和可行性。
The results of an UAV dynamic failure injection test showed the validity and practicability of this scheme.
采用动态应变测试和试验模态分析法对QTZ80型塔式起重机进行振动测试和分析,并通过实验结论验证其理论分析的正确性。
Vibration measurement and analysis of QTZ80 tower crane is conducted through dynamic strain test and experimental mode analysis. The correctness of theoretical analysis has been proved by the results.
通过实验数据的分析,验证了动态位速率调整算法的正确性和实用性。
The correctness and practicability of the dynamic bit rate allocation algorithm are verified by the analytical result of the experiment data.
应用空气动力学、工程热力学理论,推导空气弹簧垂向动态特性分析的数学模型,经过试验验证模型的正确性。
Based on the theory of aerodynamics, engineering thermodynamics, the mechanical model for air spring vertical dynamical characteristics analysis is built and proved to be correct by test.
最后,基于模块化业务动态更新平台,本文设计和实现了网上书店仿真实验系统,来验证平台的可用性和正确性。
Finally, base on the modular business dynamic update platform, this paper designs and implements a network bookstore system to verify the usability and accuracy of the platform.
分析了植物的能流反应,首次针对种植屋面的草坪植被层进行能量传输的动态数值模拟,实验验证了数值方法的正确性。
It is the first to simulate dynamically the processes of the energy change in plats layer of planting roof, and the numerical calculation is proved to be correct by experiments.
最后通过动态疲劳实验验证了结论的正确性。
Correctness of the conclusion was validated through dynamic fatigue experiments.
膛内弹上高压气室气流模型的动态实验,证实了这三个模型的正确性和实用性。
The dynamic tests above gaseous flow's model had confirmed that above these three models were accurate and useable.
在软件中只需输入关键的参数,即可生成螺纹的数控加工程序并进行加工动态仿真,以检验数控程序的正确性。
In this software, as long as the key parameters are inputted, the NC program will be created out immediately, and the dynamic emulation will be accomplished to check up the validity of the NC program.
用计算机对模型进行仿真,仿真的结果符合实测群落恢复演替的动态趋势,从而验证了建模时所提出假设的正确性。
The computer simulation result is close to the dynamic tendency of actual community restoration succession, so the hypothesis that proposed for establishing the model proves to be correct.
对环路中的各部件参数等进行了设计与仿真,建立了环路的动态仿真模型,验证了算法的正确性,并且得到了数字化载波同步环路设计的一些经验值。
Then we validate the algorithm's correctness by establishing a dynamic simulation model of the loop, in which we obtained some experiential values of certain parameters.
实验结果较好地体现了直接转矩控制追求电机快速动态响应这一特征,验证了控制算法的正确性。
The experiment results show the character that DTC has rapid dynamic response and the control method is feasible.
在圆弧型同步直线电机试验台上进行试验,试验结果较好的体现了直接转矩控制追求电机快速动态响应的特性,验证了控制算法的正确性。
Test is done on an arced linear synchronous motor test-bench and result shows a fast dynamic response achieved by direct torque control method and the control algorithm is also verified.
对此有源滤波器的建模原理进行了分析,通过仿真建立了模型的动态曲线,在此基础上对系统的收敛过程作了分析研究,仿真和实验结果验证了理论分析的正确性。
The modeling principle of the proposed active power filter is analyzed. The dynamic diagram of the model is achieved by means of simulation and the convergence process of the system is analyzed.
然后,提出了一系列的规则来限制依赖的动态形成,并证明了这些规则的正确性;
Then a set of rules are proposed to confine the forming of dependencies, and their correctness is proved.
文中的数值算例分别验证了模态参数辨识及动态载荷识别方法的合理性、适用性及计算程序编制的正确性。
The numerical examples explain that the method of modal parameter identification and load identification in this thesis both are reasonable, applicable for factual engineering.
利用MATLAB软件中的动态仿真工具SIMULINK建立了异步电动机起动过程的仿真模型,仿真结果验证了判据的正确性。
In this paper SIMULINK, a dynamic simulation tool in MATLAB software, is used to establish the simulation model of the asynchronous motor starting process, and simulation results...
通过在动模机上进行故障的动态模拟实验,验证了该方法的正确性。
The method was verified by comparison with results obtained from the experiment on the analog salient-pole synchronous generator in the Tsinghua University motor lab.
但是大型的动态系统很难形成完备的样本集,所以应用上述两种方法在原理上无法保证诊断结果的正确性,容易陷入局部最小。
And when a system like NPP's is studied, the FD results based on the above methods even can not be proved in theory.
只需简单更改二进制可辨矩阵的结构,就可以计算动态变化的决策表的核属性,并通过实例验证了该方法的正确性和有效性。
Only modifying the structure of binary discernable matrix simply, it is easy to compute the core of a changeable decision table. The method is demonstrated t...
为了验证薄板焊接温度场数值模拟的正确性,应用虚拟仪器技术设计了一套焊接热循环动态检测系统。
The software for welding heat cycle was developed successfully, based on some classical mathematic models and measured data and programmed appropriately by LabVIEW7.
针对裂纹扩展中的实际情况,对动态影响半径法作了进一步的补充和改进。算例验证了方法的正确性和有效性。
In the light of the fact of crack growth problems, supplement based on the dynamic influential radius method is proposed in this paper. Results of numerical examples demonstrate t...
针对裂纹扩展中的实际情况,对动态影响半径法作了进一步的补充和改进。算例验证了方法的正确性和有效性。
In the light of the fact of crack growth problems, supplement based on the dynamic influential radius method is proposed in this paper. Results of numerical examples demonstrate t...
应用推荐