模拟结果表明:支架在膨胀过程中出现轴向缩短,且轴向缩短率随径向加载位移的增大而增大。
The simulations show that the length of the stent decreases fast with increasing displacement in the radial direction during the expansion.
如果该结构为弹性,那么在加载和卸载时力位移曲线遵循相同的迹线。
If the structure is elastic the force-displacement curve follows the same path on loading and unloading.
推倒分析中的关键是加载模式的选取和目标位移的求取。
The key of push-over analysis method is load pattern and target displacement.
试验对该网壳结构内部16个节点采用位移控制法进行比例加载,得到了结构的屈曲后性能。
Load was exerted on the 16 interior nodes by displacement control method, in this way the post buckling behavior of this structure was obtained.
在静电力作用下,悬臂梁粘连的位置和长度会改变,使得执行器的电压位移特性严重依赖加载历史。
The position and length of cantilever stiction change with static driven voltage, so the voltage displacement characteristic depends on load history.
通过计算机控制,加力机构可以对微小试件按力或位移控制方式加载,载荷大小通过传感器直接由计算机数字化。
The loading frame can work in either load-control or displacement-control mode, and signals from the load sensor are digitalized with the control computer.
研究积分分离PID控制算法,用来控制根据位移加载的试验过程;
PID arithmetic by which the loading process of displacement system is controlled is successfully adopted in two control systems.
着重研究了前后油缸加载点的相对位移。
The relative displacement between the front and retral loading location is emphasized.
文中建立了张力动态位移加载模型,并在大型程序(EPFEP3)中得以实现。
In the apprcach a dynamic tension establishing model is obtained, and is carried out in program 'EPFEP3'.
采用位移和应力联合控制的增量法控制加载过程。
The loading procedure is controled by the incremental method which is jointly controled by the stresses and the displacements.
分析了加载卸载过程中力-位移曲线与环内应力的关系。
The relationship between the restoring force-displacement curve and the stress in the ring during loading and unloading was analyzed.
本文通过钢筋混凝土芯梁及粘贴钢板补强混凝土复合梁的疲劳试验,研究了它们在疲劳试验过程中载荷和加载线位移及跨中挠度的变化规律。
This paper deals with the load-deflection and load displacement curves of beams basedon the fatigue experiments of plated and unplated RC beams.
在基于切线刚度的位移加载控制法基础上进行改进,采用基于割线刚度的位移加载控制方法,并绘制了相应框图。
Through improving the displacement loading control method based on the tangent stiffness, this paper has presented displacement loading control method based on the secant stiffness.
系统控制方面,通过单片机系统产生四路信号,经驱动电源直流放大后加载到压电陶瓷微位移器上。
As to controlling system, the four-channel signals from MCU are output to DC amplifier to be amplified and then loaded to PZT platform.
在相同位移速率和相同载荷水平条件下,同一次循环时岩石变形曲线的加载段与卸载段的相应拟合参数值不同。
The imitational parameters are different for loading section and unloading section of the fine-sandstone deformation curve at the same circulate curve under the same deformation-rate and stress-level.
本文采用变刚度的矩阵位移法分析无粘结预应力混凝土网格梁的加载全过程。
This paper presents a matrix structural analysis of variable stiffness on the complete loading history of prestressed concrete grids with unbonded tendons.
通过不同位移幅值、不同频率和不同循环的加载试验,研究了铅芯橡胶阻尼器的工作性能。
Through the loading test of different displacement amplitude, various loading frequency and circulation, working properties of lead-core rubber damper were investigated.
对悬臂式抗滑桩,桩身位移随时间的延长不断增大,桩顶位移最大,加载至桩破坏时,其破坏面在拟滑面附近;
For cantilevered anti-slide pile, displacement of pile increase continuously with time, the topper displacement is max. The failure envelope is nearby design failure surface when load achieve extreme.
将均匀梁结构延拓并加上附加载荷,使梁的位移化为周期函数。
A homogeneous structure of beam is in continuation and bears additional load; and the displacement of the beam is converted into periodic function.
通过一个算例分析,指出了用该模型计算出的荷载-位移曲线与试验曲线最为接近,是一种有效且简单易用的卸载及再加载模型。
An example is cited to indicate that the comprehensive model fits the best with the test load-displacement curve, which shows that it's an efficient and simple unloading and re-loading model.
本模块提供FLV文件加载基于时间位移。
This module provides the ability to seek within FLV (Flash) files using time-based offsets.
本模块提供FLV文件加载基于时间位移。
This module provides the ability to seek within FLV (Flash) files using time-based offsets.
应用推荐