加热辊设在与加压辊远离的定影辊侧面。
The heating roller is disposed on one side of the fixing roller remotely from the pressing roller.
感应加热辊装置，加热辊，定影设备和成像设备。
Induction heating roller device, heating roller, photographic fixing equipment and imaging device.
一种定影装置具有一个定影辊、一个加压辊和一个加热辊。
A toner image fixing apparatus has a fixing roller, a pressing roller, and a heating roller.
此外，由于减少了加热辊的温度变化即过冲或下冲，所以可提高图像的定影效率。
In addition, since a temperature variation, that is, overshoot or undershoot, of the heating roller is reduced, a fixing efficiency can be increased.
一种用于控制提供到加热辊的功率的方法和设备及相应于该方法和设备的相位控制电路。
A method and an apparatus to control power supplied to a heating roller and a phase control circuit corresponding to the method or the apparatus.
因此，通过使用加热辊的温度变化斜率的相位控制来改变功率的占空比，可执行对定影系统的精细控制。
Accordingly, by varying a duty ratio of power through a phase control using a temperature variation slope of a heating roller, a fine control of a fixing system can be performed.
简介了热旋压的工作机理，加热方法和辊轮进给方法。
The working mechanism, heating method and roll feeding method of hot spinning are briefly introduced.
这种压榨基本上由一个大直径(高达3米)中心辊，内注蒸汽加热(最多3吧)。
This press consists basically of a large-diameter (up to 3 m) center roll which is internally heated by steam injection (up to 3 bar).
辊压加热可选石英管加热和中波红外辐射管加热，并可配备加热对流搅拌系统。
Roller squeezer heating can be quartz tube or infrared tube, and also can equipped with convection system.
通过辊加热装置可对皮革进行涂油和上腊。
Still it finishes oiling off and waxing processes through roller heating device.
传动辊温度随加热时间而改变，在计算玻璃板温度时，必须与传动辊的温度场耦合求解。
The temperature distribution of glass plate must be solved simultaneously with roller's temperature field which varies with heating time.
在研究玻璃加热过程时，传动辊释放出的辐射热是个非常重要的因素，其大小与传动辊的温度有关，影响着钢化玻璃的质量。
When studying the process of heating glass, radiation coming from the conveying roller is a factor of vital importance, and it affects the quality of tempered glass.
介绍了端出料连续式加热炉炉头辊道的改造。
The reformation of side discharge roll table of continuous reheating furnace is introduced.
重点介绍了辐射管加热无氧化辊底式炉和辊式淬火机的特点。
The characteristics of pipe radiator heating scale-free roller furnace and quenching machine were mainly introduced.
对辊底式加热炉的炉底辊道、燃烧系统等有关问题进行分析讨论，提出一些看法。
Discussions are made on the roller track and combustion system etc. of roller hearth type heating furnace. Some opinions are presented.
直热式主辊筒，有效加热面积超过了75%，提高了能源的利用率。
The main roller is of direct-heating mode, which makes the effective heating area exceed 75% and increases the energy utilization.
文中通过对几种旋转辊筒加热系统的比较和分析，确定了具体设计方法，介绍了系统的方块图及其调节系统的特点及使用效果。
The author makes some comparative analyses on several rotary drum heating systems so as to find out a practical method to design the system.
板坯加热炉中合理的出炉滑坡结构对减少钢坯划伤、配合炉门密封、减少钢坯对炉门及出炉辊道的冲击力都很重要。
For bloom beating furnace reasonable coast is important to decrease bloom nicked, cooperate with the door of furnace to airproof and decrease bloom wallop to the door of the furnace and the roller.
可完成中空玻璃的加热、辊压工序。
Used for heating and rolling process in insulting glass production.
主要工艺流程为：下料、加热、成型辊银、局部整形、切边、弯曲、整体热校正。
In general the major roll forging processes consisted of blanking, heating, roll forming, locally sizing, side cutting, bending and integrally hot correcting.
我公司的热蜡辊涂机基于了CM-203设计平台，将双壳铬涂抹辊与加热供应面板结合。
The CMS Hot Wax roll coater is based on the CM-203 design platform which incorporates a double shelled chrome applicator roll and heated supply pan.
麻面翘皮缺陷经常发生在热轧板带下表面，它与加热炉炉底辊的使用状况有很大关系。
The defects of stick breaks and seams often appear on the undersurface of the strip, its formation is re lated to the condition of CSP the roller in the heating furnace.
利用热处理温度场的计算机模拟软件计算出大型锻钢支承辊锻件差温加热及冷却时的温度场。
The temperature field of a large forged back-up roll during differential heating and cooling was simulated with a computer based finite element method.
一种实现上述方法的装 置，由压延机、剥离辊筒组和压光机构成，在剥离辊筒组与压光机的进料端压光辊之间设置有一个导送辊，导送辊中设置有加热装置。
The feed end felt wrapped roll between the wipe roll drum set and the press polishing machine is set guide roll in which the heating device is set.
在热轧生产线上，轧坯加热变软，被辊道送入轧机，最后轧成用户要求的尺寸。
In hot-rolled production line, rolling billet heating softened, the roller into the mill, finally rolling into the size of user requirements.
轴承套圈余热退火辊底炉生产线是一高度机械化自动化的特大型加热设备。由于受厂房长度限制，设计成长方形的闭环结构，这是本设计的特点之一。
The large roller hearth furnace production line for annealing hot bearing RACES is designed as a rectangular and closed structure under the limit of the length of available shop.
轴承套圈余热退火辊底炉生产线是一高度机械化自动化的特大型加热设备。由于受厂房长度限制，设计成长方形的闭环结构，这是本设计的特点之一。
The large roller hearth furnace production line for annealing hot bearing RACES is designed as a rectangular and closed structure under the limit of the length of available shop.
应用推荐