为增加切削刀具表面硬度引入了钻石化学蒸发沉淀涂层工艺。
Diamond CVD coating process is introduced to increase the surface hardness of cutting tools.
硬度高于棕刚玉,磨粒易破碎,棱角锋利,切削性能好,磨削热量小等。
Hardness than corundum, abrasive easily broken, sharp edges and corners, good cutting, grinding heat and small.
因卡爪硬度较高,又系断续切削,所以修正时切削深度和走刀量要小,切削速度也不宜太高。
The clamping claw with high hardness, and intermittent cutting, so that when the cutting depth and cutting amount is small, the cutting speed is not too high.
切削刀具最重要的性能是在高温下能保持的硬度、耐磨损和冲击韧性。
The most important properties of cutting tools are hardness at high temperature, wear resistance, and impact strength.
切削速度和材料硬度是决定切屑变形的两个主要影响因素。
And that cutting speed and material hardness are two main influential factors that determine chip deformation.
分析了高硬度辊皮的磨损情况;改进了辊皮的切削方案;满足了生产需求并提高了作业率。
The wear conditions of high hardness roller sheet are analysed and cutting projects of roller sheet are improved.
热硬度,即材料由于存在于切削区的高温而升温时仍能保持其硬度的能力。
Hot hardness, which is the ability of the material to retain its hardness at elevated temperatures in view of the high temperatures existing in the cutting zone.
与棕,白刚玉相比硬度高,韧性大,呈单颗粒球状晶体,具有良好的多棱切削刃,抗破碎较强。
With brown, white fused alumina compared to high hardness, toughness, showed a single particle spherical crystal, has a good multi-row cutting edge, strong anti-crushing.
而其临界切削厚度与材料的硬度有关。
And its critical cutting thickness and hardness of the material relevant.
这种刀具材料的耐磨性与陶瓷材料相近,并具有较高的强度和韧性,在切削高硬度材料时表现出良好的性能。
This material possesses high strength and toughness, its wear resistance being similar to that of ceramics. As a result, these tools show good performance in cutting high hardness materials.
与棕,白刚玉相比硬度高,韧性大,呈单颗粒球状晶体,具有良好的多棱切削刃,抗破碎较强。
Similar hardness and white fused alumina, white fused alumina than in the high toughness, abrasive cutting edge sharp edges and corners to keep good, high durability.
电火花可切削材料,不论其硬度或韧性,但仅限于导电工件材料的加工。
EDM can cut materials regardless of their hardness or toughness, but is limited to the machining of electrically conductive workpiece materials.
磨辊的硬度、耐磨性与切削加工性能,存在难以兼顾的矛盾。
For the rolls of a roller mill there are contradictions among their hardness, wear resistance and machining properties to which considerations are hard to be given comprehensively.
结果表明:工件进给速度对表面粗糙度的影响最大,切削深度和刀具前角次之,工件硬度影响最小。
The results show that the effects on surface roughness are feed speed, depth of cutting , tool rake angle and parts hardness in turn.
其特点是强度高、硬度高、耐磨性好。所以,其切削加工性差,主要是刀具耐用度和加工效率均低。
It has the characteristic of high strength, hardness and good wearing ability, so it's machining capability is poor, mostly because tool's wearing and machining efficiency is very low.
经渗碳及淬火后,具有表面硬度高、心部韧性好的特点、冷变形塑性中等,切削加工性好。
Carburizing and quenching, with high surface hardness, good toughness characteristics, the heart of cold plastic deformation of medium, cutting is good.
ECM工艺可用来切削一切导电的金属,不论其硬度如何。
The ECM process can be used to machine any metal that conducts electricity, regardless of hardness.
高温加工及综合性能极好,允许切削速度较高,加工材料的硬度越高,效果越显著。
It has excellent high temperature machining and comprehensive performance, and allows higher cutting speed. The higher the hardness of machined materials, the more remarkable the effect.
因此,对衬板材质的要求是:既要求具有很高的表面硬度,以抵抗矿石的凿削与切削,又要求具有很高的强度与韧性,以抵抗冲击载荷。
Therefore, the liner materials should be required to have both very high surface to resist the drilling and cutting of ore and very high strength and toughness to resist impact Lord.
切削刀具的硬度越高,耐磨性就越好。
Wear resistance improves as cutting tool hardness increases.
切削速度可以无级变频调速,以适应不同硬度材料加工。
The cutting speed can be adjusted by stepless frequency conversion to suit materials in different hardness.
结果表明,选择合适的功能添加剂调配的合成切削液防锈性能较好,并适应较高硬度的水。
The effects of rust inhibitors, hard water and surfactants on synthetic cutting fluid were investigated.
呈绿色,晶体结构,硬度高,切削能力较强,化学性质稳定,导热性能好。
Green Silicon Carbide Micropowder is green and features high hardness and strong cutting force, steady chemical property, good capacity of heat-transmission.
而碳化钛的高研磨能力是由颗粒的强切削力所致,人造金刚石则由颗粒的高硬度所致。
The high abrasive ability of the titanium carbide was caused by the cutting power of the particles, while that of artificial diamond resulted from a high hardness of the particles.
当工件材料硬度低于HRC50,切削力和切削温度的变化规律符合普通的金属切削理论,硬度超过HRC50则切削力和切削温度的变化规律大不相同。
While the material machined hardness is lower than HRC50, the changing rule of cutting force and cutting temperature was accordant with the common cutting theory.
因此,刀具的硬度和它在高温下所能保持的硬度是选择切削刀具材料时的重要因素。
Hence, the hardness of the tool and the degree to which it remains its hardness at high temperature are important in the selection of a cutting-tool material.
垂直于铣削加工面各点的显微硬度,随着距切削表面距离的增大而逐渐降低,且趋于平缓;
The microhardness of various point of milling working surface gradually reduces with the increase of distance of cutting surface, and then remains flat.
过渡金属碳化物和氮化物具有高硬度、高熔点、耐磨损和耐腐蚀的优良特性,被广泛应用于切削刀具和用作硬质涂层。
In this thesis, a first principles study of the electronic properties and mechanical properties of transition metals, transition metal carbides and nitrides is presented.
过渡金属碳化物和氮化物具有高硬度、高熔点、耐磨损和耐腐蚀的优良特性,被广泛应用于切削刀具和用作硬质涂层。
In this thesis, a first principles study of the electronic properties and mechanical properties of transition metals, transition metal carbides and nitrides is presented.
应用推荐