同时，设计了专门的合模、分模夹具。
Also, special clamps used for jointing and separating are designed.
并对自动分模技术的研究和应用进行了总结。
The summary for the research and application of the automatic parting design was presented.
分模面应经过零件中心，而不要靠近上下边缘。
The parting surface should be through the center of the part, not near the upper or lower edges.
如果可能分模面应沿着单一平面，否则就顺着零件轮廓方向。
Parting surface should be along a single plane if possible, else following the contour of the part.
模具参数包括：分模面位置、飞边桥尺寸、中心连皮位置及厚度。
The die parameters included parting face position, bridge size, central slug position and thickness.
详细介绍了分模过程，以及在“组件”模块中进行其它元件设计的过程。
Both split die process and other elements design in "components" mould are stated in detail.
软件系统的实现与验证：分模方案设计软件原型系统开发，典型算例验证。
Realization and testing of software system: Development of prototype software system of parting design scheme, testing of typical instances.
分析塑料模的分模技巧及纠错方法，给从事模具设计的技术人员提供一定的参考。
By analyzing the mold parting technique and the corrected skills of the plastic mold, give some reference to the technical staffs who take in the mold design.
针对支撑座形状特点 ，巧妙采用连锻方案 ，解决了曲面分模的水平错移问题。
Through adopting continuously forging, the shift of parting surface was solved according to the support shape.
如果分模面不能在单一平面，利用设计的对称性来减小侧向推力不失为一种好方法。
If the parting line cannot be on a single plane, then it is good practice to use symmetry of the design to minimize the side thrust forces.
分析塑料模的分模技巧及纠错方法，给从事模具设计的技术人员提供一定的参考。
Injection mold parting techniques were analyzed, hoped it has a certain reference for injection mold designer.
根据开模方向，结合零件的边界描述确定零件上的分模线，进而对分模面进行设计。
According to the parting direction and the description of boundary, the parting line of a body is decided and then the parting surface is designed.
多余的锁模力，可能让模具无法“呼吸”或排气，周期超时等，对模具分模线的挤压。
Heaping on the clamp force, makes the mold harder to "breathe" or vent, and over time, can permanently hob closed the vents on the parting line.
飞机发动机涡轮叶片的内部结构相当复杂，这给叶片模具的分模设计带来了很大的困难。
The internal structure of turbo blade in plane engine is quite complex, which brings so much difficulty for parting design of turbo blade mould.
涡轮叶片是飞机发动机的核心部件之一，其内部结构日趋复杂，这给涡轮叶片精铸模具的分模设计带来了很大的困难。
As one of the core parts of aeronautic engine, turbine blade has increasingly complicated inner structure, which exceedingly obstacles the parting design of precise casting mould of turbine blade.
我们定义了一些附件数组来保存美术作品文档，并定义了一些附件字段来保存营养标签和分模线（die line）。
Attachments arrays are defined to hold artwork documents, and attachment fields are defined to hold the nutritional label and die line.
它们非常适合大型固定机械，清除生产线、分模和组装以及不动产，机械，工作引发输送线，产品装配，以及其他工厂的维护和操作。
They are ideal for servicing large, immovable machinery, working off a conveyor line, product assembly, and other plant maintenance and operations.
结果表明，由于连杆锻后宽度尺寸不够，在增加了热矫形工序后造成其变形量处于临界变形区，导致分模面切边带区出现严重的混晶和魏氏组织。
The result showed hot sizing was the main factor to cause critical deformation, to make mixed grain and coarse grain widmanstatten appear in parting face.
当虎克两个月后又再次从试验者肚脐眼收集样本时发现，虽然是让他们当中一部分人洗了个澡才收集的，可他们的微生物朋友——和之前的一模一样——依旧长势喜人。
When Hulcr resampled some belly buttons after a couple months and dozens of showers, their bacteria — the same bacteria from before — were still growing happily.
清单3第一部分中的查询几乎跟清单2中的交互式版本一模一样。
The query in the first part of Listing 3 is nearly identical to the interactive version in Listing 2. Differences include.
或者它可以被再次地分到模模板文件，每个部分都具有一部分的工作量。
Or it can be subdivided into modular template files, each one taking on part of the workload.
将最后成形的面块放在听型烤模(烤听)中 让其发酵一段时间 这称为"最后发酵"这样可使面块再次充气鼓起因为成形操作过程中曾驱走许多以前的气体.此发酵阶段通常需25～40分钟 视待制面包的品种而定.
fermentation period, which is known as "final proof" so that they can become once more inflated with gas. since much of the old gas had been expelled during the moulding operation.
凝胶注模成型技术是一种近净尺寸陶瓷成型技术，它为解决陶瓷材料的加工成型问题提供了一条十分有效的工艺途径。
Gelcasting is a novel and near net-shape forming technique for ceramics, which has provided an effective approach for resolving difficulties of machining and forming for ceramics.
光学纤维。第2 - 20部分：产品规范。A 2类多模光纤分规范。
Optical fibres - Part 2-20: product specifications - Sectional specification for category A2 multimode fibres.
光纤。第1 - 45部分：测量方法和试验规程。模场直径。
Optical fibres - Part 1-45: measurement methods and test procedures - Mode field diameter.
光学纤维。第2-30部分：产品规范.A3类多模光纤分规范。
Optical fibres - Part 2-30 : product specifications - Sectional specification for category A3 multimode fibres.
光学纤维。第2-30部分：产品规范.A3类多模光纤分规范。
Optical fibres - Part 2-30 : product specifications - Sectional specification for category A3 multimode fibres.
应用推荐