利用坐标变换的方法得到的凸轮轮廓线可为凸轮机构的动力学仿真和数控加工编程提供依据。
The cam contour curve was obtained through coordinate transformation method. It offers references for dynamic simulation and the programming of numerical-control machining for cam mechanism.
研究了基于齿轮测量中心检测凸轮的基本原理,并解决了测量过程中凸轮轮廓线拟合、测头控制策略和补偿等问题。
This paper studies the basic principle of detecting cam based on the Gear Measuring Center, and solves such key problems as cam contour matching, compensation and controlling strategy for the probe.
推导出适合打纬共轭凸轮机构的双简谐运动规律和共轭凸轮廓线的坐标方程。
The double simple harmonic motion of the tightening weft cams follower and the mathematical equations of the CAM were established.
采用计算机绘制和数控机床加工凸轮廓线时,都要输入直角坐标值。
Rectangular coordinate must be input when we use computer to draw CAM contour line or use numerically controlled machine to process it.
提出了双作用式平行分度凸轮机构,并按研究齿轮啮合的方法研究其凸轮廓线。
This paper proposes double action parallel indexing CAM mechanism, and studies cams profile by methods used in gear meshing.
进一步讨论了采用CAD动画的方法,高速高精度地计算凸轮廓线曲率半径的过程。
Then the process for computing the radius of curvature of planar cam profile is introduced by means of CAD animation.
运用相关函数法研究了凸轮廓线误差对凸轮机构从动件动力精度的影响,并给出了动力精度的求解方法。
The influence of errors of cam profiles on the dynamic accuracy of cam mechanism is studied using the correlation function method, and a calculation means of dynamic accuracy is given.
针对凸轮廓线导引型汽车滑动天窗机构的运动简图,推导了其主要运动参数的公式。
According to the kinematic sketch of CAM profile guiding type automotive sliding sunroof mechanism, the formulae of its major kinematic parameters are derived.
本文利用复数表示法,得出从动转子中心作平面一般运动情况下的凸轮廓线的设计方法。
With the help of complex number operation, the author has developed a method for designing the contour of a CAM whose follower keeps a general plane motion.
这种作图法可以直接求出凸轮的实际轮廓曲线而毋须绘制其理论轮廓线,因而使作图简化精确。
The proposed graphical method may directly plot the CAM profile without plotting its pitch curve, therefore its construction is more simplified and more accurate.
在给出了凸轮的廓线坐标后,采用三次样条函数对凸轮廓线进行逼近,使得理论分析结果更具实用价值。
After give out the coordinates of cam profile, the paper uses cubic spline interpolation to approximate the cam profile, which make theoryly result more practicable.
按本文的方法设计特殊速比函数,可使与主动滚子啮合的从动凸轮廓线不会产生曲率干涉。
The special speed-ratio function designed in this paper can make driven cam profile that meshing with driving roller no curvature interference.
这对凸轮廓线的进一步分析、测绘及改进设计是十分有效的。
It'll be available to analyse. survey and improve the design of the outline curve of CAM.
本文应用三次样条函数建立凸轮廓线方程,并进行机构的运动和动力分析。
The formulas of CAM profile are established through the use of spline function and a method is given for kinematic and dynamic analysis of the cams in this article.
对偏心轮式结构给出两种实现一分度的具体型式,并根据共轭齿廓形成原理推导了凸轮廓线方程。
The equations of the cam's picth curve are derived on the basis of forming principle of conjugate profile.
它能够绘制各种从动件运动规律曲线,计算凸轮轮廓坐标值及绘制凸轮廓线。
All kinds of Moving law curve of driven member can be drawn, coordinate data of CAM outline-calculated, and curve of CAM outline-drawn.
本文提出一种实用的凸轮廓线动态设计方法。
The paper Outlines a practical dynamic design method for CAM profiles.
变速输入的凸轮机构,驱动力随凸轮廓线而变化,使得凸轮机构的设计成为一个难题。
CAM mechanism with variable inputting speed, its driving force will change along with the profile of CAM, thus make the design of CAM mechanism becomes a difficult problem.
以冲击谱定量预测凸轮驱动系统的运动状态,给出了凸轮廓线动态设计原则和程序流程。
Based on the quantitative prediction of the shock spectra to the behavior of CAM driven mechanisms, the dynamic design principles of CAM profiles and the corresponding flow scheme have been given.
应用该方法导出了四种不同类型凸轮机构的凸轮廓线的解析表达式,并给出了对应的设计实例。
The formulae of designing the cam profiles for the four different types of cam-follower systems are derived using the proposed relative v…
应用该方法导出了四种不同类型凸轮机构的凸轮廓线的解析表达式,并给出了对应的设计实例。
The formulae of designing the cam profiles for the four different types of cam-follower systems are derived using the proposed relative velocity method$…
关于平面凸轮廓线设计,现有文献中推出的凸轮廓线方程式,一般均是以凸轮转角为参数的函数。
In the design of plate cam profiles, the cam profile equation generally takes the angle of cam rotation as the independent parameter.
针对平底从动件盘形凸轮机构,导出了同时适用于直动和摆动从动件的凸轮廓线综合公式及凸轮实廓外凸的条件式。
And then expounded that these equations are the general synthetic equations suitable at the same time for plate CAM mechanisms with straight moving or oscillating followers.
与传统图解法相比,极坐标矢量法设计空间凸轮廓线工作量减少了约5 0 %,并有利于凸轮廓线的精确数控加工。
Comparing to the traditional graphic method, the workload of new method is about 50% less than that of the graphic method and it is more suitable for the numerical controlled manufacturing.
以冲击谱定量预测凸轮驱动系统的运动状态,给出了凸轮廓线动态设计原则和程序流程。
Based on the quantitative prediction of the shock spectra to the behavior of CAM driven mechanisms, the dynamic design principles of CAM profiles and the correspond...
以冲击谱定量预测凸轮驱动系统的运动状态,给出了凸轮廓线动态设计原则和程序流程。
Based on the quantitative prediction of the shock spectra to the behavior of CAM driven mechanisms, the dynamic design principles of CAM profiles and the correspond...
应用推荐