本文建立了空气冷凝换热器简化动态模型及凝结液膜厚度模型。
A simplified dynamic model of air condenser and the model of its liquid film are driven in this paper.
根据实验研究结果拟合出了肋片管式冷凝换热器烟气强迫对流凝结换热的实验关联式。
The experimental correlations for the forced convection-condensation heat transfer of flue gas in the heat exchanger are obtained by the experimental study result.
一效列管换热器中出来的冷凝液被用来预热进料。
Condensate from the first-effect calandria is used for preheating the feed.
所得结果给热管集热器的制造指明了方向，精心制造高效率的冷凝段换热器将是提高此类热管集热器的主要部分之一。
The results also indicated that the most important for a thermally better collector is to improve heat exchange of the condenser.
苯酐冷凝器是苯酐精制生产最重要的换热器之一，其主要失效形式为应力腐蚀。
Phthalic Anhydride condenser is one of the most important heat exchangers in Phthalic Anhydride refining production, and its main failure mode is stress corrosion.
通过在蒸发器和冷凝器之间增设一组换热器，提高了单位功耗除湿率。
The dehumidification rate per unit energy consume was greatly increased by adding a heat changer between evaporator and condenser.
该系统完成了对典型制冷装置的换热器部件，如板管式蒸发器、单脊翅片管式蒸发器、箱壁式冷凝器的参数化设计和绘图；
The system implements the parametric design and drawings of many typical kinds of refrigerating parts, e. x. the plate-tube evaporator, the single back-fin evaporator and the box condenser.
平行流冷凝器是一种新型高效紧凑式换热器，目前主要应用于汽车空调中，但对其应用于家用空调器中的研究较少。
The parallel-flow type condenser is a new type of high coefficient and compact heat exchanger, being popular in the auto air-conditioning but not in the residential airconditionings.
这一高压高温气体接着向冷凝器转移。冷凝器是一个大的换热器，通常位于引擎散热器的前端。
This high pressure high temperature gas then travels onwards to the condenser - a large heat exchanger usually located in front of the engine radiator.
文中涉及了蒸发器、冷凝器、冷凝蒸发器、中间换热器、毛细管和压缩机的设计计算。
The design calculations of evaporator, condenser, condensing-evaporator, medium heat transfer, capillary and compressor are described.
基于研制的新压缩冷凝机组样机开发探讨了微通道换热器的设计方法。
Design method of microchannel heat exchanger is discussed according to the development of a new compressor condensing unit model.
管壳式冷凝器是制冷空调、石油化工行业中应用广泛的一种换热器。
Shell and tube condenser is widely used in refrigeration and air-conditioning applications.
对板翅换热器中的氮的冷凝和蒸发耦合传热特性进行了实验研究。
An experimental study on conjugated heat transfer performance of evaporation and condensation in plate-fin heat exchanger is carried out.
冷凝器、蒸发器等换热部件采用了换热效率较高的板式换热器。
We applied Panel heat Exchanger with higher heat exchange efficiency and smaller size in condenser and evaporator and other heat exchange parts.
第二部分为比较传统的管翅式换热器和微通道换热器在压缩冷凝机组中的应用。
Part Two compares the traditional tube-fin heat exchanger and the microchannel heat exchanger used in compressor condensing unit.
这是一种管壳式换热器，可用于蒸发、加热、冷凝、冷却等工艺，由介质的物理、化学和腐蚀等性能来选择适宜的材料制作。
It is of pipe type used for evaporation, heating, condensing, cooling operations, Materials for this unit are optional as per the physical, chemical and corrosive properties.
研究包括微通道换热器在制冷压缩冷凝机组中的设计，微通道换热器仿真与优化和微通道换热器试验。
The research includes design of microchannel heat exchanger in refrigeration compressor condensing unit, microchannel heat exchanger simulation and optimization, and experimentation.
利用工质蒸发-冷凝的相变过程，提高换热器的工作效率。
The efficiency of heat exchanger is considerably increased owing to the evaporation-condensation phase transformation of the cooling medium.
随着污水流量的增加，换热器的换热特性大大提高，但其作为蒸发器和冷凝器时的换热器的影响有所区别。
The other one is that with the increment of sewage flow quantity, the efficiency of heat transfer is improved, but the affection is different on evaporator and condenser.
我厂生产钛材，不锈钢等各种材质的化工设备，主要有风机，离心机，钛泵，钛阀，列管式冷凝器（换热器） ；
The equipment made by us of titanium, stainless steel, aluminum or plastics, mainly include column condenser ( heat exchanger ) ;
从烟厂中央空调节能角度出发，在换热器、冷凝器、循环冷却水系统等几方面进行水质处理，从而达到节能效果。
From the cigarette factory in the central air-conditioning energy saving point of view, in the heat exchanger, condenser, cooling water system for water treat...
从烟厂中央空调节能角度出发，在换热器、冷凝器、循环冷却水系统等几方面进行水质处理，从而达到节能效果。
From the cigarette factory in the central air-conditioning energy saving point of view, in the heat exchanger, condenser, cooling water system for water treat...
应用推荐