不锈钢盘管的特点耐高温蒸汽、抗冲击腐蚀、耐氨腐蚀；
Thee characteristics of stainless steel coil high temperature steam, impact corrosion and ammonia corrosion;
文章最后还对以锰代镍低碳高合金钢的冲击腐蚀磨损机制进行了探讨。
At last, this article also discussed the mechanisms of corrosive impact abrasion for these LCHA after substitution for nickel with manganese.
结果表明，冲击功对两种钢的冲击腐蚀磨损性能和机制具有很大的影响。
The results show that the impact energy has great influence on the corrosive impact abrasion properties and wear mechanisms of the two steels.
结果表明，在相同试验条件下低碳高合金钢的冲击腐蚀磨损性能要优于高锰钢的。
The results show that the resistance of low carbon high alloy steel is better than that of the high manganese steel under the same test condition.
当冲击功为2.0J时，改性高锰钢的冲击腐蚀磨损机理为挤出棱加工硬化造成的材料剥落。
When impact power is 2.0 J, the impact-corrosion and abrasion mechanism of the steel is characterized by spalling of extruded hardened edge.
比较两种材料试样在一定时间内的失重变化情况，表明低碳高合金钢的抗冲击腐蚀磨损性能优于高锰钢。
Wear loss of specimens for these two steels during a certain time show that low carbon high alloy steel is much more resistant to corrosive impact abrasion than high manganese steel.
因此，研究开发新型的耐冲击腐蚀磨损材料，提高工件在冲击、腐蚀和磨损交互作用下的服役寿命具有现实意义。
So, it is significant to develop the new impact-corrosion-wear resistant materials and increase the service life of the workpieces under the interaction of impact, corrosion and wear.
通过自制的冲击腐蚀磨损试验机，施加不同极化电位对高锰钢在矿浆介质中的冲击腐蚀磨损行为进行了试验研究。
Effect of polarization potential on the corrosion-wear behavior of high manganese steel in ore slurry was investigated by a self-made impact corrosive-wear tester.
结果表明，2.0J冲击功条件下，中碳合金钢、低碳高合金钢均以浅层剥落为主，抗冲击腐蚀磨损性能相近；
Results show that the leading mechanisms of both alloys are shallow flaking under 2.0 J impact work, and the anti-impact-corrosion wear are close.
在改进的MLD - 10型冲击腐蚀磨损试验机上，对不同成分的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
LCHA with several variations of composition were tested with a modified MLD-10 wear tester to investigate their behavior under corrosive impact abrasion.
在改进的MLD - 10型冲击腐蚀磨损试验机上，选择三种不同的冲击功，对以锰代镍的低碳高合金钢的冲击腐蚀磨损性能进行了测试。
Under three different impact energy, LCHA with Mn in place of Ni were tested with a modified MLD-10 wear tester to investigate their behavior of corrosive impact abrasion.
一般而言，大多数热塑性材料具有较高的抗冲击强度、耐腐蚀性以及良好流动性使其容易加工而适于复杂成型设计。
In general, most of the thermoplastic materials offer high impact strength, corrosion resistance, and easy processing with good flow characteristics for molding complex designs.
MIM制造是理想，要求接近全密度、高冲击韧性、高断裂韧性、耐疲劳和耐腐蚀性。
MIM fabrication is ideal where near-full density, high impact toughness, fracture toughness, and fatigue and corrosion resistance are required.
冶金、矿山等行业所用湿磨机衬板的服役条件十分恶劣，既要承受冲击，又要承受腐蚀和磨。
Lining board used in the wet-grinding machine at metallurgical mines works under very bad conditions. It has to bear impact, corrosion and wear.
随着热强碱腐蚀时间的延长，高锰钢的冲击韧度明显降低，碱脆开裂是造成高锰钢冲击韧度下降的主要原因。
With increasing corrosion time the impact toughness of high Mn steel obviously decreased. The major mechanism was effect of the caustic embrittlement cracking.
设计师能选择更硬更耐腐蚀的钢板-有些部位能使用最高至550BHN的钢板并且仍具有较好的抗冲击性能。
Harder and more abrasive resistant steels are available to the designers - up to 550 BHN can be applied in certain regions, and still with acceptable impact properties.
灯体主要结构部件采用高压铸铝压铸组成，具有抗冲击、耐腐蚀的优点。
The main part of light USES high press die-casting aluminum. It has the features of impact resistance and corrosion attack.
玻璃纤维增强不饱和聚脂模压成型外壳，具有强度高，耐冲击、耐腐蚀等优良性能。
The glass fiber strengthen unsaturated polyester mould pressing shape outer covering. Have the strength high, bear the impact and bear the good function in etc. in corrosion.
采用浸泡腐蚀试验和腐蚀前后的冲击试验并借助于扫描电镜观察，研究了热强碱介质中高锰钢的腐蚀速率和冲击韧度。
The corrosion weight loss rate and impact toughness of high Mn steel in hot concentrated caustic solution were studied by using immersed corrosion, impact test and SEM.
冶金矿山湿式磨机衬板，使用工矿条件恶劣，既受腐蚀又受冲击和磨损。
The liner of the wet-grinding machine at metallurgical mines works under very bad conditions, and it has to bear impact, corrosion and abrasion.
本文对没有除氧措施的余热锅炉气包进水管发生的氧腐蚀及由此产生的气包水冲击问题进行了探讨。
In this article, the cause of oxygen corrosion occurred at the water inlet in the waste heat boiler without the mea-sure of removing oxygen and the problem of water shock were dis-cussed.
制品具有减震性、冲击性、合性、腐蚀性、直观包装物的形态等优点。
Production enjoys such advantages as good cushioning effect, shock resistance, heat-sealing performance, corrosion resistance, etc.
溶敷金属具有低硬度高韧性，可耐热耐腐蚀耐冲击磨耗。
Dissolve deposited metal has low hardness and high toughness, heat corrosion resistance to impact abrasion.
设备、管线的选材安装充分考虑临氢条件、腐蚀、冲击、振动、应力等因素。
Selection of equipment and pipeline material and their installation need to completely consider various factors of critical hydrogen condition, corrosion, impact, vibration, stress etc.
外壳采用玻璃县委增强不饱和聚树脂压制而成，具有外形美观，耐腐蚀，抗静电，耐冲击及热稳定性好等优良性能；
The housings are made of glass fiber reinforced unsaturated polyester resin, with features of elegant appearance , corrosion proof, antistatic, shock resistance and favorable thermal stability.
特点：高强度，好热冲击抵抗，高温抗性，高反氧化作用，低抵抗力，对腐蚀的抵抗。
Features: high strength, good thermal shock resistance, high temperature resistant, high anti oxidation, low resistivity, resistance to corrosion.
这是因为大量的冲击本州岛东部沿海的海水具有强腐蚀性。
That's because the vast amounts of seawater that crashed ashore on the eastern edge of the island of Honshu are highly corrosive.
这种特别耐用的合金能够成功地抵抗长时间高温、硬水、酸、腐蚀物和热冲击所产生的破坏作用。
This tough alloy successfully resists the effects of prolonged high operating temperatures, hard water, acids, corrosion, and thermal shock.
利用光镜、显微硬度计研究了铬含量对低碳合金钢组织、硬度、冲击韧度及耐均匀腐蚀性的影响。
The influences of chromium content on the hardness, impact toughness and corrosion resistance of low carbon alloy steel were studied using om and hardness tester.
利用光镜、显微硬度计研究了铬含量对低碳合金钢组织、硬度、冲击韧度及耐均匀腐蚀性的影响。
The influences of chromium content on the hardness, impact toughness and corrosion resistance of low carbon alloy steel were studied using om and hardness tester.
应用推荐