随着高压电路的广泛应用，高低压兼容电路的设计变得越来越重要。
With the extensive use of the HV IC, the design of HLV compatible integrated circuits have become more and more important.
本发明涉及一种差分对兼容电路板，包括：公共电路、第一分电路和第 二分电路；
The invention relates to a differential pair compatible circuit board, including a public circuit, a first subcircuit and a second subcircuit;
连接逻辑电路时，必须小心翼翼，以保证他们的逻辑电平和电流额定值是兼容的。
Care must be taken when connecting logic circuits to ensure that their logic levels and current ratings are compatible.
采用它制作高频开关电源，不仅简化了电路，同时可以改善电源的电磁兼容性能，且降低了制作成本。
High frequency switching power supply made from it can not only simplify the circuit, but also can improve the EMC characteristics and reduce the cost.
该电路结构简单，制造工艺与传统的CMOS工艺兼容。
The circuit is simple and compatible with traditional CMOS processes.
该电路结构简单，易于实现，且制作工艺与标准CMOS工艺完全兼容。
This circuit structure is simple and can be realized by the standard CMOS process easily.
使用测试设备测试电路的连续性，以确保系统的兼容性和安全性，随后进行安装，更换或维修。
Test continuity of circuits using test equipment to ensure compatibility and safety of system, following installation, replacement or repair.
您可以使用备用插座，测试不同的分立元件值。只须维持规范的是在电路兼容，以及完成这项工作。
You can use spare sockets to try out different discrete component values. Just keep the ones that are spec-compatible in the circuit, and get the job done.
反激式开关变压器和反馈控制回路设计，以及考虑电磁兼容性对电路的改进，是其关键技术。
The design of flyback switching transformer and feedback control loop and the improvement of the circuit for considering electromagnetic compatibility are the critical technologies.
该器件不仅输出电流可调范围宽、允许工作电压变化范围大、电路接口与TTL兼容，而且体积小、调节方便。
The device has several advantages such as adjustable wide current range, controllable wide voltage range, circuit interface compatible with TTL, small volume and easy modulation.
最后，对各部分电路的布局、接地等方面进行电磁兼容设计，通过反复调试程序及电路，基本实现了系统指标要求。
Finally through the EMC design of the layout and grounding, the request has been achieved by debugging all the whole circuits and programs time after time.
该比较器具有高精度，高灵敏度和较快的速度，其工艺条件及参数与数字电路兼容。
This comparator is very accurate, very sensitive and very fast in speed. Process conditions and parameters for the device are compatible with those for digital circuits.
设计并制备了一个CMOS工艺兼容的集成湿度传感器，将湿度传感器与CMOS测量电路集成在同一芯片上。
CMOS compatible integrated humidity sensor is designed and fabricated. The humidity sensor and CMOS circuits are fabricated at the same chip.
输出的设计与大多数5v的更高的电压为12和15伏直流选择ttl电路兼容。
Outputs are designed to be compatible with most 5v TTL circuits with options for higher voltage 12 and 15 VDC.
文章从电路和结构两方面介绍了军用电子产品在电磁兼容设计上的一些实用性设计。
This paper introduces the practical electromagnetic compatible design of military electronic products on circuit and structure.
根据直升机起飞、着舰时所需的助降灯光使用要求，考虑电磁兼容性标准，详细介绍了灯光助降系统的主机板、电源板、驱动电路、故障检测电路等硬件设计过程。
On the basis of the need of the lamplight for the helicopter to take off or touch down at the warship, the standard of the electromagnetic compatibility is considered.
本文介绍了一种高频荧光灯镇流器芯片的设计，在芯片的实现上充分体现了低压控制电路与高压功率器件在单一芯片上的兼容性。
The design of a novel high frequency fluorescent lamp IC, on which low voltage control circuit and high voltage power device encapsulated in one chip, is introduced.
电路结构简单、工艺兼容性好，同时具有温度的迟滞特性可以更好的保护芯片，避免热振荡的产生。
It features simple structure, good process compatibility and function of temperature hysteresis which prevents the damage by thermal-oscillation.
同时，他们测试电路，以确保兼容性和安全系统。
As well, they test circuits to ensure the compatibility and safety of systems.
本文设计的微气压传感器的制作工艺与集成电路工艺兼容，结构上主要包括加热电阻、敏感元件和测试电阻等三部分。
The micro gas pressure sensor designed in this thesis can be fabricated using an IC compatible process, and it is composed of a heating resistor, a sensitive element and a testing resistor.
在高速电路设计中应充分考虑电磁兼容方面的问题，合理地使用去耦电容在电磁兼容防止电磁干扰中具有重要作用。
EMC problems should be considered in the design of high-speed circuits and the reasonable application of decoupling capacitor plays a very important role in avoiding EMI.
它与讨论助听器的电输入电路特性的IEC公告118的第6部分兼容。
It is compatible with IEC Publication 118 Part 6, which covers the characteristics of hearing aid electrical input circuits.
LVDT输出信号的波幅与相位转换成与微控制器内部ADC兼容的形式，一般需要添加外部电路。
Conversion of an LVDT's output signals' amplitude and phase into a form compatible with a microcontroller's internal ADC usually requires additional external circuitry.
针对开关电源印制电路板的电磁兼容性设计，从PCB的布局与布线、接地等方面提出设计原则及注意事项。
The design rules and observing proceedings are presented from the layouts, wires placing and grounding of the printed circuit board (PCB) aiming at the EMC design of switch power supplies.
为了满足电磁兼容性和安全性要求，设计了EMI抑制电路。
The EMI suppression circuit is designed to meet the requirements of electromagnetic compatibility and safety.
此高压兼容工艺适用于制作带高压接口的复杂信号处理电路。
As a result, the integration of HVCMOS and low-voltage CMOS(LVCMOS) is realized, and the high voltage compatible technology can be used .
设计构成可复用的与通用数字电路工艺兼容的高稳定度基准电压源具有重要意义。
Therefore, it is significant to develop a voltage reference circuitry that is compatible with digital CMOS technology and can be integrated into a system on a chip (SOC).
增量编码器的设计产出与大多数5v的更高的电压为12和15伏直流选择ttl电路兼容。
The incremental encoders outputs are designed to be compatible with most 5v TTL circuits with options for higher voltage 12 and 15 VDC.
该工艺与已有的双层多晶硅自对准NPN晶体管工艺相兼容，可用于制造高性能的互补双极电路。
The process is compatible to the existing double poly-silicon self-aligned NPN transistor process, which can be used to fabricate high-performance complementary bipolar circuits.
该工艺与已有的双层多晶硅自对准NPN晶体管工艺相兼容，可用于制造高性能的互补双极电路。
The process is compatible to the existing double poly-silicon self-aligned NPN transistor process, which can be used to fabricate high-performance complementary bipolar circuits.
应用推荐