载我去会议中心的出租车用“二元”两字最能形容:要不就是狂飙,要么就是急停。
THE cab ride to the conference can best be described as binary: either we travel at full speed or we stop.
据悉,目前机场只有一架飞机,可载6-8人,租价为每小时3万元。
The company's only helicopter can accommodate 6-8 people, and it costs about RMB30000 an hour to rent, Lu said.
据唐《元和郡县图志》载:“县东北有离石水(今北川河),因取名焉。”
According to Tang, "Zhi-yuan and counties map" contains: "Lishi County Northeast Water (now the North River), named because of behavior.
对双曲抛物面索网结构利用非线性有限元方法对找形、常温下结构受载计算及其火灾反应的过程等进行详细的分析研究。
Cable structures with hyperbolic paraboloid shape are analysed in detail for the form finding and structural loading calculation as well as fire reaction at high temperature by FEA method.
对螺纹槽管进行了疲劳强度计算,并采用边界元和有限元法对螺纹槽管的应力集中进行了数值分析及静载强度计算。
The stress concentration analysis was done by the finite element method and boundary element method. The fatigue strength and the strength under the static load were calculated.
根据土壤直埋电缆的温度场特性,利用有限元法对热场进行剖分和计算,经过迭代计算出有土壤直埋电缆的载流量。
Finite element method is applied to solve the field with the temperature field characteristic, then the ampacity of buried cables is received after iterative computation.
将损伤力学理论与有限元法相结合,研究钢筋混凝土简支梁静载作用下的损伤破坏过程。
Failure process for the reinforced concrete free beam under static loading is formulated based on the elastic damage theory with the finite element method.
本文对结构和受载都非常复杂的聚丙烯环管反应器建立了有限元分析设计模型。
In this thesis, finite element analysis is carried out on a large polypropylene tubular loop reactor which is complicated both in structure and loadings.
本文建立了悬索管桥分析的有限元模型,并考虑了悬索管桥恒载产生的初始内力、拉索垂度等几何非线性因素。
In this paper, a finite element model for the analysis of the pipeline suspension bridge was set up with considering the initial internal force and verticality of the staying cable.
文章根据毕沙定律、电流回路元和载流线圈的费曼模型,用普通物理的方法计算出载流线圈在远处一点的磁场分布。
Using Biot-Savart law and the Feynman's model, the paper suggested a simple method to calculate the magnetic field generated by a current loop with arbitrary shape.
结合堆载预压加固软基实例,分别采用殷宗泽双屈服面模型、粘弹-粘塑性和粘弹-粘塑性损伤模型进行有限元分析。
Deformation of preloaded soft ground was calculated with the Yin's double yield surface model, the viscoelastic-viscoplastic model and the viscoelastic-viscoplastic damage model respectively.
利用大型通用软件ANSYS建立结构空间有限元分析模型,分析活载作用下各控制截面的应力分布规律。
Based on the universal finite element analysis software ANSYS, a spatial model of the bridge is built and the stress distribution under the live load on main sections is analyzed.
同时结合实例,提出一种基于有限元-多体技术对动载作用下柔性结构的疲劳寿命预测方法进行研究。
With an actual example, research method based FEM-Multi body technology is developed for flexible structure applying dynamically loading.
并利用弹流理论来研究啮合轮齿间油膜厚度,用有限元法来研究轮齿受载弹性变形。
The film thickness is analyzed with elastohydrodynamic lubrication theory, tooth elastic deformation computed by finite elements.
一元复始,万象更新。2007年已载着累累硕果驶入历史长河,满载希望的2008年向我们走来。
As the new Year begins, let us also start anew. 2007 has been carrying the rich fruits into history, and 2008 with full hopes is coming to us.
针对静载荷实验确定单桩极限承载力的局限性,采用有限元分析方法作为单桩极限承载力静载实验的有益补充。
In this paper, the vertical ultimate bearing capacity of single pile has been studied by using FEM as numerical method.
通过试验和有限元分析研究被连接元件的相对刚度对多钉双剪连接钉载分配的影响。
In the present paper, an experimental and analytical study of effects of jointed member stiffness on the fastener load distribution is performed for double-shear, multiple-bolted joints of composite.
得出松原市环境承载力大小为1105亿元,松原市环境承载状况较好,当前的环境承载为适载状态。
The environmental carrying Capacity of Songyuan city calculated 1105 billion yuan, and the environmental carrying is in good condition, the current state is properly.
刘易斯,二元经济学模子,载《美国经济评论》1954年,第36期第46-51页。
Lewis W A. A model of Dualistic Economics, The American Economic Review, 1954, 36:46-51.
用有限元法模拟了连续激光辐照受载金属所产生的软化效应。建立了计算软化效应的二维有限元数值模型。
The termal degradation effects in the preloaded metal thin plate irradiated by CW laser beam are calculated with the finite element method.
实际上,48字节结构是美国电话公司偏爱64字节商务载量和欧洲公司要求每个信元有32字节之间的折衷。
In fact, the 48-byte structure was a compromise between V. S. telephone companies, which favored a 64-byte payload, and their European counterparts, which wanted 32 bytes in each cell.
最后,对各列受载最大的滚子进行了有限元分析,得到了滚子的最大接触应力及接触变形。
Finally, the maximum contact stress and deformation of the rollers with the biggest load are obtained using finite element method for every row roller.
对比结果表明,杆板组合有限元模型能有效合理地简化偏心受载的加筋板结构。
The result indicates, rod-plate finite element model are effectiveness and rational to model the stiffened-panel structure under eccentricity load.
本文在计算拱坝应力的试载法中采用有限元地基,以克服伏格特F。
In the trial load method for calculating arch-dam stress, this paper adopts the FEM to overcome shortcoming of the f.
通过仿真模型建立、分辨面元提取与风矢量模糊解消除,分析了散射计地面与星载定标特性,给出了散射计工作特性仿真结果。
The resolution cell extraction method and the wind vector ambiguous solution are presented. The ground and space flight calibrating and scatterometer working characteristics are analyzed.
同时,不同形貌的聚醚-聚酸酐三元共聚物胶束在载药效率和载药量上有明显差别。
Considered the application in nanomedicine, the effect of the diverse morphologies on drug loading efficiency was also investigated.
本文对结构和受载都非常复杂的聚丙烯环管反应器建立了有限元分析设计模型。
The liquid phase bulk propylene polymerization in loop reactor was simulated based on the propylene polymerization mechanism.
该程序实现了堆载的施加,既能用于计算单纯的真空预压也能用于真空–堆载联合预压的有限元计算。
The program can both calculate the vacuum preloading and the surcharge preloading combined with the vacuum preloading.
建立现浇薄壁管桩复合地基三维模型,通过有限元模拟,与现场静载试验结果对比,表明建立的模型是可行的。
A 3d model was established for the composite foundation with cast-in-situ concrete thin-wall pipe piles. It was shown by the results of finite element analysis that the present model was reasonable.
建立现浇薄壁管桩复合地基三维模型,通过有限元模拟,与现场静载试验结果对比,表明建立的模型是可行的。
A 3d model was established for the composite foundation with cast-in-situ concrete thin-wall pipe piles. It was shown by the results of finite element analysis that the present model was reasonable.
应用推荐