• 减小喷管可以提高矢量偏转角度

    The vectoring Angle increases with the decreasing of the nozzle pressure ratio.

    youdao

  • 通过灵敏电流计光标偏转角度显示温度变化

    The temperature change is displayed by the deflection degree of cursor of galvanometer.

    youdao

  • 实验验证了可3的范围实现偏转角度高精度测量

    In experiments, a deflection Angle of a measured target was measured within about 3 deg. with high accuracy.

    youdao

  • 为了实现较大偏转角度测量该平行平板干涉仪引入了一位置探测系统

    A position detection system is incorporated into a parallel plate interferometer in order to realize large deflection Angle measurement.

    youdao

  • 有效声孔径。电极厚度以及器件声光衍射效率偏转角度、声驱动功率参数

    Meanwhile, such parameters as diffraction efficiency, deflection Angle and driving power of device have been analyzed and computed theoretically.

    youdao

  • 根据光斑四象限探测器光敏面上位置计算船舶相对激光光源偏转角度

    According to spot in the four-quadrant detector photosensitive surface position to calculate the ship's yaw Angle relative to the laser source.

    youdao

  • 椭圆气孔附近,相对于吸气孔的偏转角度较佳两侧10度范围内。

    The deflection Angle of the long shaft of the oval relative to the aspiration hole is preferably 10 degree at both sides.

    youdao

  • 测量结果表明这种偏转特点可双向偏转偏转角度具有快时间响应

    The results show that the deflector has the features of a large, bidirectional angular deflection and fast time response.

    youdao

  • 分析了偏转角度附加高度之间关系得出了面相位和物面高度之间映射关系。

    The relationship between the tilting Angle and the additional height difference is analyzed. Then the relationship between the phase of the test object and the height of object's surface is obtained.

    youdao

  • 同时考虑操纵偏转角度饱和偏转速率饱和对系统的影响,设计出一种变结构可重构飞行控制系统。

    The limitations on surface's deflection and deflection rate are addressed to develop the variable structure reconfigurable flight control system.

    youdao

  • 在不增加激励输入功率情况下,带倾角激励器可以极大地增加主流偏转角度,推力向量控制效果好。

    The actuator at an angle can change greatly the primary jet direction and has a good effect on thrust vectoring without increasing input power.

    youdao

  • 结果表明,搅拌头形状焊接速度、搅拌头转速、搅拌头偏转角度等工艺参数焊缝成形重要影响

    The results show that the shape of pin, welding speed, rotating velocity, deflected Angle of pin and plunge depth have important influences on the welding formation.

    youdao

  • 理论分析证明,物体的偏转可以引入稳定线性附加相位,并给出了物体偏转角度附加相位之间的关系式;

    Theoretical analysis shows that RSPSM can introduce a stable and linear additional phase changes. The relationship between rotating angle and additional phase is offered.

    youdao

  • 车辆液压动力转向系统通过伺服控制压力方向流量,把转向盘输入转角信号转变为车轮偏转角度输出

    Vehicle power steering systems control direction and flow of pressure oil with servo valves, then transfer angular inputs from steering wheels to corner angular outputs of road wheels.

    youdao

  • 名称中的“BARCODE_30”表示计算开始时,在蛋白质中以30个氨基酸单位,随机选择一个偏转角度

    The "BARCODE_30" means that for every 30 amino acid residue segment in the protein, a random choice as to the value of the angles for one residue are randomly picked at the beginning of the run.

    youdao

  • 采用有限元分析法对不同固定方式下镜面变形进行分析,结果表明:镜释放热应力前后角度偏差达近3个数量级;在合理采用压板固定方式,镜面法向偏转角度10?。

    Applying finite element method to analyze shows that normal angle deviation of mirror body before and after thermal tension being released can be nearly 3 order magnitude which is 10?

    youdao

  • 旋转角度可用来度量线圈内通过电流角度指针的转动镜面反射光线偏转来测定。

    The Angle of rotation, which provides a measure of the current flowing in the coil, is measured by the movement of the needle or by the deflection of a Beam of light reflected from the mirror.

    youdao

  • 射流主要角度影响,几乎阀口尺寸无关;射流的收缩系数则与两者都有关系。

    The deflection angle of injection mainly depends on the valve port angle and almost has no relation to the valve size, but the reduction coefficient vavies with both of them.

    youdao

  • 射流主要角度影响,几乎阀口尺寸无关;射流的收缩系数则与两者都有关系。

    The deflection angle of injection mainly depends on the valve port angle and almost has no relation to the valve size, but the reduction coefficient vavies with both of them.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定