单一信号译码，可检测双向应用的方向以及速度。
Quadrature signal decoding gives the TR400 the ability to detect direction as well as speed for bidirectional applications.
本发明从有 限的信息中找出正确的传输模式和保护区间，以利后续的信号译码工作。
When the guard interval size and mode of the broadcasting signal are determined by one of the mode detectors, the arbitrator further terminates the operations of the other mode detectors.
采用耐高温的锁定型霍尔元件和钐钴永磁转子分别构成位置与速度传感器，并设计相应的速度信号倍频电路与位置信号译码电路。
Fireresistant Hall device and SmCo rotor is used to design position and speed sensor, and the corresponding doubling circuit and decoding circuit is designed.
并将脉冲宽度信号送至SD-M - 3002专用电路完成计数、译码、脉冲分配等控制。
And pulse width signal is sent to SD-M-3002 special circuit, to complete such controls as counting, decoding, pulse distribution, etc.
仿真结果表明，与传统的译码方法相比，新方案对于克服GMSK信号所固有的严重符号间串扰(ISI)有明显的改进。
Compared with traditional decoding method, simulation results of the new scheme show evident improvement in overcoming the severe intersymbol interference (ISI) of GMSK signals.
为了实现GMSK信号解调，接收机中dsp实现了调制信号的误差频谱估计、位同步恢复及译码。
To demodulate GMSK signal, DSP is used in receiver to achieve error spectrum estimation, bit synchronization recovery and decode.
译码单元由指令缓存器和指令译码器构成，针对12位的指令代码翻译成16位控制信号，传送给处理器内部各个部件，用以保证各部件正常工作。
The encoding unit, composed of instruction buffer and command encoder, translates the 12-bit command code to 16-bit control signal, and ensures each part of the system to work steadily.
提出排序的球形译码算法，能处理任意形状的星座图信号，降低译码时间。
Propose the ordered sphere decoder so that it can process the constellation with any shape and quicken the decoding time.
在调制信号前采用数据预编码，对接收信号进行相应译码，以消除信道中噪声引起的差错传播。
Error propagation caused by noise can be avoided by precoding the data at the transmitter prior to modulation and decoding operation of received signals.
首先介绍了H . 263建议中视频信号纠错编码的应用，然后着重介绍了BCH(511,493)纠错编译码的设计及其实现。
After a brief description of error correcting code of applied digital video signals in H. 263, this paper focuses on the design and implementation of BCH (511,493) error correcting code.
应用锁相环集成电路ne567对音频信号的鉴相原理实现对控制信号的译码输出，控制井下仪器马达工作。
The latch phase circle circuit NE567 functions as phase demodulation of audio frequency signals for realizing decoding output of the control signals to control the downhole motor operations.
另外针对光纤通信系统对传输信号码型的要求，利用FPGA设计了8b10 B编码器和10b8 B译码器。
In addition, 8b10b encoder and 10b8b decoder are designed on base of FPGA for meet with the need for the type of transmission data in fiber communication system.
PC通过打印机控制口与STROBE发送信号，译码器产生选片信号，传给单片机P 3.2端形成中断信号。
PC sent signal via print control port and STROBE, encoder generated choosing signal and sent it to P3.2-end of single-chip to form interrupt.
指令译码器将编码指令信号进行译码，最后由驱动电路来驱动执行电路实现各种指令的操作。
Encoding instruction decoder for decoding command signals, and finally by the drive circuit to drive the implementation of circuit operation to achieve a variety of commands.
根据UT信号的特征，从时域和频域角度提出了两种数字译码方法。
According to the characteristics of ut signal, this paper puts forward two ways of digital decoding: Time Domain Analysis and Frequency Domain Analysis.
分析了数字视频信号MPEG2的帧结构、信道编译码方法、交织与解交织及64QAM调制与解调等关键技术。
The MPEG2 frame structure, error correcting encoding and decoding, interleave and deinterleave, and64 QAM modem are analyzed in detail.
应用本发明能够针对BE C信道进行LDPC码的纠删译码，提高了对BED信号传输数据的的纠错能力。
Use of an embodiment of the present invention allows LDPC code erasure decoding aimed at the BEC, and increases the error correcting capability for BED signal transmitted data.
为此，研制成功了一种有线-无线信号中继设备，其特点是在复杂的地形、地貌区域施工时，译码器均能工作于无线状态。
To resolve this problem, a line radio signal exchanger has been developed, with which the decoder can always be operated in wireless mode. The design principle and…
为此，研制成功了一种有线-无线信号中继设备，其特点是在复杂的地形、地貌区域施工时，译码器均能工作于无线状态。
To resolve this problem, a line radio signal exchanger has been developed, with which the decoder can always be operated in wireless mode. The design p…
CPLD用来生成系统各模块所需的译码电路和控制信号。
All conversion circuits and control signals that other modules require are produced by CPLD.
载波是一种模拟信号，用于将信息译码。
Carrier waves are a form of analog signal that is used to encode information.
为了提高模型的容错性，提出了基于最大似然译码原理的监测信号信息校正方法，然后利用编码基本网在无畸变信号的基础上进行故障诊断。
In order to enhance the fault tolerance ability of the fault diagnosis model, information correction is thus adopted based on the maximum likelihood decoding theory.
译码电路接收测量端模拟信号，转化为7段显示的数字信号，发送到数据锁存器上。
The A/D decoding circuit received simulation signal form measurement port and converted the signals into data signals which displayed by 7-segment, then signals were sent to data latch.
译码器：解读数据信号并把它列出于显示器的荧光屏上的装置。
Decoder: a device used to unscramble data signals and display them on a video screen.
目前对莫尔斯信号的译码器的研究都是针对单一信号源，信息传到PC机以后才能实现网络化传输。
Now the study of Morse signal decode is aimed at single signal source. The information can be transmitted in networks only after it is sent to PC.
Danilo的数字译码器解码SRC- RAI信号，这是意大利官方每小时一次的信号。
Decode Periodic signal Transmissions Danilo's digital decoder decodes the SRC-RAI signal, the Italian official hourly signal.
由于该算法充分利用了软译码得到的似然比信息，因此可以实现最优信号检测。
This algorithm can achieve the best demodulation because the likelihood ratio of information is used adequately.
由于该算法充分利用了软译码得到的似然比信息，因此可以实现最优信号检测。
This algorithm can achieve the best demodulation because the likelihood ratio of information is used adequately.
应用推荐