分析了现有数字信号校准装置存在的问题，提出了一种基于可重构技术的多功能数字信号校准装置的设计方法。
The existing problems of digital signal calibration device are analyzed and a novel one based on reconfiguration technique is presented.
SHT11数字温湿度传感器是一款含有已校准数字信号输出的温湿度复合传感器。
SHT11 digital temperature and humidity sensor is a calibrated digital signal output of the temperature and humidity combined sensor.
同时利用单片机和微计算机对传感器输出信号进行实时动态处理，使本传感器系统具备了参数和测试精度的自校准功能。
Meanwhile, using SMC and computer to dealing the real time dynamic to the out put signal makes this transducer system has parameter and the proofread function of measure the precision.
根据实验结果，反演了该激光雷达的几何重叠因子和最终的校准信号。
According to the experimental results, the geometric overlap factor and the final calibrated signal of this lidar are given.
在集成电路的检测及应用电路的调试中经常要用到信号发生器和电荷校准仪。
In the IC testing and adjustment using IC, signal generator and charge calibrator are often be used.
本文对采用阶跃信号动态校准系统的误差分析具有重要的意义。
The results of the paper is significant in error analyzing of dynamic calibration of systems using step-function signals as the input.
电路输出可以作为标准信号，用来校准医用微分器，作生理电脉冲波形变换的研究。
The output of the oscillator can be used as a standard signal for calibration of the differentiator to employ in research on the transformation of physiological pulse wave forms in medical science.
在脉冲压缩之前或之后，在频域向所接收的雷达信号应用校准滤波器。
The calibration filter is applied to the received radar signals in the frequency domain either before or after pulse compression.
并用动态信号分析仪和功率计校准输出信噪比。
Then the output S/N is calibrated DA with the dynamic signal analizer and power meter.
各种不同的压力测试可通过简单地校准波形因素而实现，或是利用波峰到波峰的变化显示信号质量的指示器，底部表示为方形电压。
Various stress tests can be achieved by simply adjusting the crest factor, an indicator of signal quality using peak-to-peak and root mean square voltages.
为校准电路，首先断开或使输入光敏二极管变暗，以便A 1 A转换非交流信号。
To calibrate the circuit, first disconnect or obscure the input photodiode so that A1A converts no ac signal.
要校准手臂，休门观看了动作和新的手形状的动画和想象自己在做他们，而球队记录在她的大脑产生的信号。
To calibrate the arm, Scheuermann watched animations of the movements and new hand shapes and imagined herself doing them while the team recorded the resultant signals in her brain.
该发射器还具有校准和放大传感器信号，而这是现有标准电压或电流输出。
The transmitters also have calibrated and amplified sensor signals, which are available as standardised voltage - or current outputs.
运用信号子空间对信号DOA和通道增益的约束关系，在无校准源时，可以得到通道增益的估计。
Under the constraint of DOA angles and sensor gains in the signal subspace, the estimation of sensor gain can be obtained without any calibration source.
简要介绍了动态信号分析仪的校准方法、自动校准系统和校准时应注意的问题。
This paper introduces the calibration method for dynamic signal analyzer, automatic calibrating system and the notable problems in the calibration.
信号理论的要素，校准的信息论，统计和基本规律也是为这个目的提出的。
Elements of signal theory, information theory, statistics and fundamentals of calibration are also presented for this aim.
针对失效阵元给阵列性能带来的影响，提出一种基于信号重构的阵列失效校准方法。
Failed elements can seriously degrade the performance of an array and a method for array failure correction based on signal-reconstruction is presented.
检校应用研究分为三个部分：数字信号源的校准研究、测量误差分析及最佳测量周期的确定。
The application research will include three parts: research on the calibration of digital signal source, error analysis and the best calibration interval.
本课题是在虚拟仪器信号设备自动测试系统的研发基础上，针对此系统的故障检测与误差校准功能进行开发。
It is necessary to improve test accuracy. On the basis of the virtual instrument signaling test system, this paper research for the system fault detection and error calibration function.
每次循环减少信号超过50 %。需要重新校准；探测器的寿命是6 - 8循环。
Each cycle decreases signal by more than 50 %. Recalibration is necessary; lifetime of probe is 6-8 cycles.
本文介绍一种用于增益校准的高精度直流信号源。
This paper describes a high precision DC signal sources used for the gain calibration.
文中在校准应用研究中采用田口方法，根据数字信号源的频率、调幅及调频试验典型值推导出全量程校准公式。
The Taguchi method is studied to derive calibration formulae of frequency and amplitude modulation of digital signal generator in whole range in this paper.
为了降低流水线模数转换器中数字校准电路的规模和功耗，提出了一种新的基于信号统计规律的后台数字校准技术。
To reduce the power dissipation and chip size of digital calibration circuits of pipelined analog-to-digital converter (ADC), a new statistics-based background calibration technique is presented.
附带的电子器件可增加校准时的薄膜加热功能和放大从探头的扩音压力传感器输出的信号。
Additional electronics have been added to provide film heating for calibration and to amplify the signal from the head's microphone pressure sensor.
该装置应包含测量接收机各项主要功能，能够用于普通信号（函数）发生器的计量检定（校准）。
The apparatus shall be furnished with the main functions of a measurement receiver, and can be used for metering and calibrating ordinary signal (function) generators.
该校准仪是用于校准各种电子电压表基本误差的专用标准仪器，具有定点频率下正弦波信号输出的标准电压源。
This normalizing device is a standard instrument used to calibrate the intrinsic errors of the various kinds of electronic voltmeters.
通过一种数字自动校准技术，可以校准差分运放及其输入信号所产生的失调电压。
A digital automatic calibration technique is developed to trim the differential OPAMP s input-referred and its former output stage offset voltages.
本文分析了时域平均法对光电信号进行滤波处理在激光绝对法校准振动传感器相频特性中的应用。
In this paper, the time domain average meth od is used to extract the interfere signal in calibrating the phase character of vibration sensor by laser interferometer.
提供了一种执行脉冲压缩雷达信号自校准的系统、方法和计算机程序产品。
A system, method, and computer program product that performs self-calibration of pulse-compression radar signals.
提供了一种执行脉冲压缩雷达信号自校准的系统、方法和计算机程序产品。
A system, method, and computer program product that performs self-calibration of pulse-compression radar signals.
应用推荐