裁剪动力:采用进口伺服控制技术,速度快,噪音小,寿命长。
Cutting Power: USES the imported servo-control technology, fast in speed, low in noise but long in service life.
探讨了直线电机的伺服控制技术和电主轴单元的设计制造等问题;
The servo control technology of linear motor and design and manufacture of electric spindle units are discussed.
光电跟踪系统中的伺服控制技术是实现高精度跟踪的关键技术之一。
Servo control in optoelectronic tracking system is one of the key technologies to realize the high precision tracking.
利用计算机及液压伺服控制技术,研制了大型液压伺服混凝土静动三轴试验系统。
Large scale static and dynamic concrete hydraulic servo triaxial testing system is designed by using computer and hydraulic servo technique.
气动伺服控制技术作为一种自动控制手段,在众多的工业领域中已经成功的获得了应用。
As an automatic control means, pneumatic position servo technology has been applied in many industry.
本论文正是在电液伺服控制技术的基础上,完成了基于DSP的电液伺服测控系统的研究。
The paper is completed research of measurement and control system based on DSP under technology.
本文在计算机技术和液压伺服控制技术的基础上对多通道汽车疲劳试验台测控系统进行了深入研究和设计。
This dissertation is lucubrating test and control system of motor fatigue test rig based on computer technology and hydraulic servo control technology.
随着伺服控制技术的逐步提高,目前伺服驱动单元正逐步成为驱动单元的主力军,伺服驱动单元的价格也在逐步减低。
Along with the gradual improvement of the servo control technology, the servo drive unit is gradually becoming the main force of the drive unit, servo drive unit price also gradually to reduce.
随着伺服控制技术的逐步提高,目前伺服驱动单元正逐步成为驱动单元的主力军,伺服驱动单元的价格也在逐步减低。
Along with the gradual improvement of the servo control technology, the servo drive unit is gradually becoming the main drive unit, servo drive unit price also gradually to reduce.
阐述了常规气动伺服控制系统研究的现状,认为以PWM和PCM调制方式为主的开关伺服控制技术仍然是研究的热点。
Based on the development situations of the pneumatic servo control technique, the main research was also aimed at the PWM and PCM on-off servo control system.
针对该设备负载大、运行情况复杂等特点,主轴采用了交流变频调速矢量控制技术,小车采用了先进的交流伺服控制技术。
Against the heavy equipment load and complex operations characteristic, the spindle used vector control technology of ac frequency speed control; the car used advanced ac servo control technology.
针对该设备负载大、运行情况复杂等特点,主轴采用了交流变频调速矢量控制技术,小车采用了先进的交流伺服控制技术。
For the load of equipment, such as the operation of complex features, using the main exchange Frequency vector control technology, using advanced car AC servo control technology.
采用基于DSP和CPLD的数字化伺服控制技术解决光电传感器的机载应用问题:隔离机体的高频振动并随动于驾驶员头盔。
Digital servo-control technology based on DSP and CPLD is used to solve airborne application problems of optical-electronic sensor: isolating vibration of airplane and tracking pilot helm.
利用电液伺服控制技术,设计一套适用在颈椎牵引椅中的电液伺服控制系统,通过M ATLAB软件对系统进行仿真,最终获得较好的控制效果。
A set of electro hydraulic servo control system was designed suitable for cervical traction chair and it was proved to be effective through MATLAB stimulation.
本文以提高某跟踪装置的伺服系统的跟踪精度为主要目标,采取了基于数字预测和滤波的计算机辅助控制技术。
To improve the trace precision of the servo system in some tracking set, the text adopts the computer aided control techniques based on digital forecast and filter.
基于比例伺服技术,设计了弯曲关节的伺服控制系统。
We design the servo control system of the bending joint based on the proportional servo technology.
介绍了某机载雷达伺服系统,对其工作原理、基本结构、控制方案、驱动技术等进行了分析探讨。
An airborne radar servo system is introduced in the paper, and the principle, structure, control scheme, drive technology of the system are analyzed.
电机现代控制技术是伺服驱动系统的核心,也是现代制造装备最具代表性的先进标志之一。
The modern control technology for motor is not only the core of servo drive systems, but is one of the most typical symbols of modern manufacturing equipments.
采用全数字技术实现对交流永磁同步电机的伺服控制,并将此项技术应用于工业缝纫机领域。
The full digital technique was adopted to realize the servo control of the ac permanent-magnet synchronous (motor.) the technology was applied in the industrial sewing machine.
操纵系统的控制策略是力伺服系统加载的关键技术。
The control strategies of control system hold the key technologies of force servo system loading.
采用新型步进电机的数控主轴头,并将细分技术用于单片微机控制的伺服系统。
NC servo spindle features new type step motor applying fine divide method to servo system controlled by single chip micro computer.
本文提出了一种基于模糊控制技术的伺服控制系统,并设计了尺度变换比例因子自适应调节的模糊控制算法。
In this paper, a servo control system is designed based on fuzzy control technology, and then a fuzzy control algorithm with parameter adaptation is presented.
介绍了虚拟仪器技术并采用虚拟仪器实现了电液伺服控制系统的计算机辅助测试。
The CAT system for electrohydraulic servo control system based on virtual instruments was introduced. The structure of system is based on PC-DAQ.
光盘存储设备的伺服系统是精密机械和计算机控制的结合,集合了激光测量及定位跟踪、DSP应用等高新技术。
Servo system of the compact disc storage device is the combination of fine machine and computer control, gathering high tech such as laser measure or tracking position and DSP application.
比例、伺服液压技术,低功率气动控制阀,填料密封生产。
Ratio, servo hydraulic pressure technology, low power pneumatic control valve, production of stuffing.
重点介绍了永磁交流伺服系统的控制策略,位置检测和辨识、主电路和驱动技术等关键技术。
This article introduced emphatically the control strategy, position detection and identification, drive technique as well as main circuit of permanent magnet Ac servo system.
虚拟轴数控机床的各伺服驱动回路由于轴间强耦合的影响,在国内外,一直是控制理论和实现技术方面的一个难题。
Servo-drive of virtual-axis machine is always a problem in control theory and application technology because it has strong coupling.
而伺服刀架的核心技术就是伺服电机的位置控制技术。
And the key technology of the servo turret is the position control technology.
其液压系统采用伺服比例控制技术,简单实用,满足了生产要求。
The servo-proportional control technique is adopted in its hydraulic system. The system has reached production requirement with simplicity and practicability.
其液压系统采用伺服比例控制技术,简单实用,满足了生产要求。
The servo-proportional control technique is adopted in its hydraulic system. The system has reached production requirement with simplicity and practicability.
应用推荐