采用高性能的伺服传动，运行平稳、响应快。
Adapt high performance actuating motor. The running is stably and the responsible is fast.
光电检测、伺服传动、气动元件及轴承刀具等选用优质产品。
Photoelectric inspecting, servo driving, pneumatic component and bearing cutter, etc adopt good quality product.
结合伺服传动控制系统的要求，确定永磁同步电机伺服系统的控制方案为矢量控制。
To meet the demand of servo drive system, the vector control technique is chosen as the control strategy of permanent magnet synchronous servo system.
设计并制造伺服传动装置，实现了方向舵、襟翼等活动控制构件铰链的机械转动模拟。
Servo-drive instrument was designed and manufactured. It is feasible to simulate the movement of the hinge of movable components such as body flap, rudder, etc.
旋转变频调速，驱动伺服电机或步进电机，传动滚珠丝杆。猈。
Rotate frequency conversion regulating speed, drive servo motor or stepper motor, drive ball screw.
当液压伺服系统用于机械传动的校正机构时，显得调整时间长，超调量大，校正精度不高。
When used in correction mechanism of mechanical drive, hydraulic servo system manifests a long time of overshoot, large overshoot and poor correction accuracy.
分析了强力切削交流伺服进给系统各组成环节及作用，对机械传动装置部分建立了模型。
This paper analyzed AC servo heavy cutting feed system component parts and their actions, and built model about mechanical transmission equipment section.
方位控制器伺服系统是一种机、电相结合的系统，机械传动装置根据控制信号驱动执行元件完成指令要求的运动。
The servo system of azimuth controller is a combine system of mechanics and electrics, the transmission mechanism drives the executive element by control signal to carry out the demanded motion.
介绍了激光内雕机中三维控制系统硬件和软件的设计，并对传动机构交流伺服驱动进行了论述。
The hardware and software design of three_dimensional control system in the laser inner carver is introduced, also transmission mechanism ac servo drive has been given account.
传动机构可以是三相或三相伺服马达。
The drive is either a three-phase or a three-phase servo motor.
存在与蜗轮传动的运动学已经被证明是快速的双向旋转的理想建成，旋转轴是通过伺服电机驱动，齿轮。
There are built with a worm gear drive which has proven to be kinematically ideal for fast bi-directional rotation, Rotary axis is driven with gears via Servo motors.
可选配伺服系统、传动系统、工作台面、吸尘装置，赠送全套正版软件。
It is optional on servo system, driving system, working platform and dust collection device. Besides, full version of authentic software would come with the machine.
进给传动：三向进给均采用交流伺服电机驱动精密滚珠丝杆，专用丝杆轴承支承，提高了机床的进给运动刚性和精度。
Feed transmission: using AC servo motor to drive the precise ball screw sets that supported by special ball screw bearing, which improves the rigidity and precision of feed movement.
＂这个传动轮与那个伺服轮相啮合，并使它转动。＂ 收藏。
This driving wheel engages with that servo wheel and turns it.
采用交流伺服驱动代替传统的机械式的凸轮传动机构，实现针辊电机与主电机的同步驱动。
The AC Servo-System drive is used instead of the traditional CAM driving mode to keep the synchronization of the pin-roller motor.
火炮伺服系统传动链存在传动齿隙，齿隙是影响火炮伺服系统动态性能和稳态精度的重要因素之一。
Transmission chain of gun servo system has backlash, it is one of the important factors that affect dynamics performance and stable precision of gun system.
机电伺服系统的齿轮传动装置，其齿隙不仅影响系统的伺服精度，更影响系统的稳定性。
The gear clearance in the driving device of the electromechanical servo system shall affect not only the servo accuracy of the system but also its stability.
采用交流伺服驱动代替传统的机械式的凸轮传动机构，实现针辊电机与其他电机的同步驱动。
The AC Servo-System drive is used instead of the traditional CAM driving mode in order to realize pin-roller motor keep synchronization with the other motor.
伺服进给系统的综合拉压刚度由伺服驱动系统刚度和机械传动系统刚度组成，其各自又受多项因素的影响。
Servo feed system comprehensive pull-pressing rigidity is made up of the rigidity of servo drive system and the rigidity of mechanical transmission system, and each is affected by multiple factors.
在数控强力切削进给伺服系统中，机械传动系统对电气调速系统具有扭矩反馈作用，容易形成机械谐振。
In CNC heavy cutting servo system, mechanical drive system has a torture feedback on electrical speed-adjustment system, thus it's possible to generate the mechanical resonance.
变频器控制主传动，伺服电机、气动控制自动落纱，性能安全可靠。
The inverter controls main drive, the serve motor, the pneumatic components control the Auto-doffer. The machine ensures safety and reliability.
本传动系统由交流伺服电机、滚珠丝杠及直线导轨等组成。
The drive system consists of AC servomotor, ball screw and rectilinear orbit etc.
叙述了改进伺服飞锯机锯切精度所采用的两种方法，即：改进随动系统的运动模型和改进飞锯车传动机构。
It describe two approaches for improving service flying saw cut accuracy. They are improving attendant system operation model and improving organ of flying saw driving.
开关磁阻伺服电机经一级减速皮带传动，电机轴不承受刚性冲 击；
The switch magnetic resistance servo motor is driven by the first level deceleration belt transmission and a motor shaft does not bear rigid shock;
考虑该传动固有的波动规律，设计了最优伺服系统，分析了参数变化对伺服性能的影响规律。
Considering inherent fluctuation of the drive, servo system is designed, and influence with respect to system parameter changes on servo performance is explored.
对于摇板造波机，系统采用了交流伺服直联线性模组的传动方式。
As to the paddle wave maker, the system USES Linear module and AC servo to drive.
提出了机械传动部件和大功率交流伺服电机的设计方法，并实际应用于1000kN数控折弯机中。
The design method about machine drive component and high - power ac motor is discussed. A engineering application case of 1000kn CNC brake - press is given.
针对包装印刷传动位置伺服系统，介绍一种基于共轭梯度学习算法的神经网络自适应PID控制方法。
The paper proposes an adaptive neural network PID controller based on weighlearning algorithm using the gradient descent method for the AC position servosystem of binding and printing.
针对包装印刷传动位置伺服系统，介绍一种基于共轭梯度学习算法的神经网络自适应PID控制方法。
The paper proposes an adaptive neural network PID controller based on weighlearning algorithm using the gradient descent method for the AC position servosystem of binding and printing.
应用推荐