具有多重软硬件闭锁功能;具有全数字仿真调试功能。
It has hardware and software multiple blocking function and full-digital simulation and debugging function.
把仿真调试成功的控制程序烧入EPROM芯片,进行EPROM仿真调试;
To Embed the control program debugged successfully into EPROM, and debug the system on EPROM;
基于被控对象建模的仿真调试方法是PLC控制程序调试过程中一种重要的调试手段。
The emulation debugging method based on the modeling of the controlled object is an important debugging method during the debugging of PLC controlling program.
系统完成后,经联机仿真调试和实际通信结果表明:性能良好,达到了预定的设计指标要求。
The result is verified to attain the index requirements by debugging and practical operating, after system design has finished.
通过系统半实物仿真调试,验证了系统的功能,证明了可编程序控制器可应用于控制保护系统中。
The function of this system is tested and verified by simulation and it can be proved that the programmable controller could be used in the control and protect system.
然后利用MATLAB进行仿真调试,对比设计要求和滤波器响应特性,反复调整滤波器lc参数,以获得最好的滤波性能。
Then we repeat modifying its LC parameters through MATLAB simulation, compared with the design demand and the filter's responding characteristic to obtain the best filtering capability.
介绍了利用计算机与PLC进行串行口异步通信方法开发的PLC仿真调试系统,并对计算机与PLC通信的实现进行了论述。
The emulated debugging system of PLC developed by means of serial communication between computer and PLC is presented and such communication technique is discussed.
工控应用程序的完善设计是保证计算机控制系统的性能与可靠性的一个重要措施,而仿真调试是使应用程序完善化的一个重要环节。
The simulation debugging is an important process in the perfect design of the application programs for computer control systems in order to ensure system performance and reliability.
结果证明,利用混合语言编程技术开发的该实时仿真软件,对建立仿真算法、仿真模型以及进行实时仿真调试是很方便的,具有较高的应用价值。
Test results of control system model are satisfactory. The developed software is proved in practical software programming, in which modeling and debugging can be easily implemented.
介绍了复贴机卷绕机构恒张力控制的基本原理和数学模型,并提出了串级PID控制策略,运用计算机仿真工具MA TLAB及其SIMULINK进行仿真调试。
The paper presents the affixture machine winding tension control and deduced mathematic model. The cascade PID control system of testing components is used. It is simulated by MATLAB and SIMULINK.
Bochs提供在原始硬件(包括全功能图形调试器)中不易提供的高效平台仿真和调试功能。
Bochs provides efficient platform emulation and debugging capabilities that are not easily provided on raw hardware (including a full-featured graphical debugger).
Adobe提供了FABridge(仿真器使用到了),但这个桥太慢、太笨重,难以调试。
Adobe provides FABridge (which the emulator USES) but the bridge is slow, bulky and difficult to debug.
在使用DeviceDeveloper调试Nokia 6310i仿真器中的MIDlet 时,有时候不能在 Nokia 仿真器与 Device Developer 调试系统之间建立调试连接。
Sometimes, when using Device Developer to debug a MIDlet in the Nokia 6310i Emulator, a debug connection between the Nokia emulator and the Device Developer debugging system cannot be established.
仿真器在本质上是调试器,因此您还可以设置断点并与设备、CPU以及内存进行互动。
The simulator in essence is a debugger, so you can also set breakpoints and interact with the devices, CPU, and memory.
仿真器提供了终端用户硬件所没有的一些调试特性,因此即使您有真正的硬件,也会发现它会非常有帮助。
The simulator offers some additional debugging features that end-user hardware lacks, so you might find it useful even if you have hardware.
一个在你的目标板上放置仿真的处理器的调试工具。
A debugging tool that takes the place of emulates-the processor on your target board.
描述供机载雷达应用软件调试、测试用的软件仿真系统。
This paper describes the simulation system for debugging and testing of air borne radar application software.
Bochs是较小的GNU公共许可证(GNU Public License,GPL)下获得许可的一种x86PC仿真器和调试器。
Bochs is an x86 PC emulator and debugger licensed under the lesser GNU Public license (GPL).
用户可以在仿真波形上调试该差别。
一个在你的目标板上放置仿真的处理器的调试工具。
A debugging tool that takes the place of emulates the processor on your target board.
潜艇分布式作战仿真系统是为作战系统开发、调试及验证提供较真实作战环境的大规模仿真系统。
Submarine distributed combat simulation system is a type of large scale system, which providing near real combat environment for the development, debugging and validation of combat system.
系统的CCS软件在XDS510仿真器和调试器配合下工作。
The CCS software of system was operated under the cooperation of XDS510 simulator and debugger.
因此,采用PLC仿真软件与计算机相结合的方法,解决课程设计中程序调试的难题,能收到较好的效果。
Therefore, uses the method which the PLC simulation software and the computer unify in solution curriculum project program debugging difficult problem, can receive the good effect.
设计嵌入式仿真平台,可以大大缩短开发嵌入式软硬件的周期,使得调试操作系统级的代码更加方便。
Designing embedded simulation platform can shorten embedded software and hardware development cycle greatly and make debugging codes of operating system level more conveniently.
为了调试和验证这种新的水下导航系统,开发了水下运载体导航系统仿真平台。
In order to debug and verify this underwater navigation system, the simulation platform of navigation system for underwater vehicle is developed.
文中介绍了控制回路全仿真模型的组成与设计,讨论了模型自动组态、调试及控制参数自整定等问题。
The major components of the full range simulation model and their design are analyzed, such issues as model configuration, model debugging and auto tuning of control parameters are discussed.
最后对系统进行调试及仿真,实验结果表明该系统运行稳定、控制效果好、性价比高,具有良好的市场前景。
Finally, debugging and simulation systems, experimental results show that the system stability, control, and cost-effective, have good market prospects.
实验证明,单片机虚拟仿真实验简化了程序在目标硬件上的调试工作,有利于缩短系统开发周期,降低成本。
The result proves that the work load of program debugging in objective hardware was reduced, development process is accelerated and the cost is lowed by micro-controller virtual simulation experiment.
着重介绍了该仿真系统的总体结构与功能设计,软件编程与调试。
The overall structure, function design, program composition and debugging of the simulation system are emphatically introduced in the paper.
对消磁系统S矩阵测量过程和分析方法进行了仿真研究,调试了S矩阵专用测量程序。
The S matrix measurement method is studied by this simulation process, and a special software for S matrix measuring is also debugged with this process.
应用推荐