通过对甘肃酒泉大规模风电基地实际运行方式的仿真计算分析，验证了措施的有效性。
With the help of simulating calculation and analysis on the wind and power base of Gansu Jiuquan Million Kilowatts wind Farm, we have verified the effectiveness of the proposed measures.
应用先进的计算机图形学及科学计算可视化技术，编制了非线性动力系统仿真分析程序，可直观地分析混沌动力系统的轨迹特性。
This paper compiles the analysing program for the simulation of the nonlinear dynamic system. With this program, the locus property of the nonlinear dynamic system can be analysed visually.
通过综合考虑运用计算机进行仿真分析的整个过程，详细介绍了基于分析过程的联合建模的研究思路。
Through considering synthetically with the whole process of the computer simulation analysis, a co-modeling method based analysis process was described in detail.
模态试验和仿真计算的对比分析结果表明，所建立的白车身有限元模型较好地反映了原结构的振动特性。
The contrastive analysis of modal test and simulation computation show that the finite element model of body-in-white has well represented the vibration characteristics of the original structure.
通过对丝杠磨削过程中丝杠受热变形的规律进行分析，运用仿真软件进行仿真，计算预测丝杠磨削过程中的变形量。
The screw deformation during grinding is calculated, predicted and simulated by a simulation software, based on analyzing the regularity of thermal deformation.
将拖缆视为“刚化柔性悬索”，应用悬索理论中的悬垂线理论对拖缆的受力进行了分析和仿真计算。
This paper considers the towline as "flexible suspended cable with rigidization" model, and applies catenary theory to analyzing the stress of the towline and to performing the simulation calculation.
借助机械系统动力学仿真分析软件ADAMS，探讨了在计算力矩、模糊变结构控制策略和所遴选的轨迹规划方法下，机械手的控制效果。
By using the simulation software ADAMS, the performance of manipulator which employing the designed control algorithms and the selected path planning method has been discussed.
土壤水分平衡模型在洪水预测、土壤湿度计算、灌溉设计管理以及全球气候变化影响的仿真分析上十分重要。
Soil water balance models are especially important in the prediction of flood runoff, calculation of soil moisture content, design and management of irrigation and simulation of climate impact.
理论分析和仿真计算表明，使用电压量的选相元件能够正确地判别各种故障类型，满足高压线路保护的需要。
Theory analysis and simulation results show that the new phase selector can determine fault types properly and be used in transmission line protective relay.
在分析多体动力学仿真计算中广泛使用的增广法基础上，提出了一种基于稀疏矩阵技术的改进算法。
On the basis of analysis on augmentation approach widely used in the multibody dynamic simulation, an improved algorithm based on sparse matrix technique was proposed.
为确定自激电容值与异步发电机空载建压时间的关系，对建压暂态过程进行了仿真计算和分析。
The relationship between the excitation capacitance and the voltage-buildup time in an induction generator was analyzed using a transient simulation and analysis.
对计算机并行处理技术在电磁暂态仿真计算中的应用进行了初步分析，并描绘了一种适合于并行计算的算法。
This paper presents a basic analysis on the application of electro magnetic transient simulation with computer parallel processing technique and describes an algorithm of parallel processing.
基于施工力学的分析方法，建立了地下洞室分期开挖仿真计算的有限元列式。
Based on analytical method of construction mechanics, the simulative computational FEM formulations about multi-stage excavation of underground chamber are prescribed.
对已有的多径时间延迟模型进行仿真分析，重新推导、反复计算、多个公式对比，得到了两个跟实验结果更加接近的修正数学模型。
Reasoning more than one multipath delay formulas simulate them repeated calculation contrast the numerical value, gained two modified mathematic models which are more approach the experiment result.
基于施工力学的分析方法，建立了地下隧洞分期开挖、适时支护仿真计算的有限元列式。
Based on analytical method of construction mechanics, the simulative computational FEM formulations about multi-stage excavation of underground tunnel and timely shoring are prescribed.
理论分析及仿真计算证明：地铁车辆辅助电源中变压器原边绕组的漏抗通过合理的设计，可以起到该平衡电抗器的作用。
Both theoretical analysis and simulation prove that rationally designed leakage reactance of the primary winding can play a role of balancing reactor.
本文制定了开关投切的工作流程，通过电气参数计算并对开关投切过程进行仿真分析，本文所设计的开关能够实现特大电流的电流转移。
The switching on-off flows are introduced in this paper. By calculating electrical parameters and simulating the switching motion process, the switch can achieve the current transfer of huge current.
对异步电动机失电残余电压的产生进行分析，建立了异步电动机失电残余电压仿真计算模型，并进行仿真计算。
The generation of the residual voltage for asynchronous motor after AC Dump (RVACD) is analyzed, it establishes the simulation calculation model and carries out simulation calculation.
通过理论分析及数值计算，首先对框架结构施工仿真分析的几种常用计算模型进行了比较及分析，指出各自的特点及存在的问题。
Through theoretical analysis and numerical calculation, comparison and analysis is carried out of the models often used with the frame structure on construction emulation analysis.
建立了图像采集系统分析模型，计算机仿真分析图像采集系统端到端信息率与采样目标统计特性的关系。
The analysis model of image gathering system is proposed. The relationship of system end-to-end information rate with target statistical characteristics is examined by computer simulation.
应用美国ETA/VPG及LS-DYNA软件，按照欧洲侧面碰撞法规ECER95，对国产某轿车汽车侧面碰撞车身抗撞性能进行了计算机仿真分析。
According to European side crash regulation, ECER95, the side crash property of a native car is analyzed by USA ETA/VPG and LS-DYNA softwares.
该方法采用了高精度、高分辨率的MU SIC测向算法，通过精确测向来实现精确定位，并对其性能进行了具体的分析和仿真计算。
The high accuracy and high resolution MUSIC algorithm is utilized in this method by means of accurate detecting direction to realize precise location. Iis performances is analyzed and simulated.
本文主要研究旨在探索运用模态实验、计算机仿真分析及优化对机床结构进行指定目标下的动态设计。
The aim of this thesis is to explore applications of modal experimental analysis, computer simulation and dynamic optimum design of machine structures on the assigned design goals.
利用波数积分方法仿真计算了该模型在自由场条件下的近程声场，并分析了近场辐射噪声的基本规律。
The sound pressure at near distance under free field was computed by using the wave number integration and the basic characteristics of the radiated noise were analyzes.
应用大型有限元分析软件ANSYS，模拟箱形梁水泥水化生热和对流边界条件，进行混凝土水化热温度场仿真计算，并与实测数据进行对比分析。
The temperature field of concrete box girder is analyzed by means of the finite element analysis software ANSYS. The computational results are compared with the experimental results.
通过带调压室水电站的模型试验和数值仿真计算，分析了阻抗式调压室在各种水力过渡过程下的水力工作特性。
The hydraulic characteristics of the throttled surge chamber under various hydraulic transition processes are analyzed through combination of numerical simulation and model test.
另外还运用有限元程序ANSYS对预应力抗裂措施下的大型钢筋混凝土水池池壁类结构形式进行了仿真计算分析。
In addition, it analyses the crack resistance of the walls of huge reinforced concrete cylindrical tanks under prestressed measures by finite element analysis software of ANSYS.
另外还运用有限元程序ANSYS对预应力抗裂措施下的大型钢筋混凝土水池池壁类结构形式进行了仿真计算分析。
In addition, it analyses the crack resistance of the walls of huge reinforced concrete cylindrical tanks under prestressed measures by finite element analysis software of ANSYS.
应用推荐